Canon Sidewheeler Configuration guide

Paddle Steamer (Sidewheeler)
PAGE01
Paddle Steamer (Sidewheeler) : Pattern
Completed Model (Total length) About 410mm
(Total width) About 130mm
Pattern 21 pages
Assembly Instructions 10 pages
*Bulid the model by carefully reading the Assembly Instractions,
in the parts sheet page order.
A paddle steamer is a boat with paddle wheels on the sides that are turned by a steam engine,
propelling the boat forward. A paddle steamer on the ocean or a river is quite an impressive
site, with its paddle wheels turning away and black smoke puffing out of its large chimney. In
the old days, boats needed people to make them move through the water, or sails, which
require technical operation, but in the latter half of the 18th century when the steam engine
was utilized, the paddle steamer was developed. In the mid-19th century, with the
improvement of the steam engine, and utilization of the screw propeller, the number of paddle
steamers being produced began to drop. There are two types of paddle steamers:
sidewheelers, which have paddle wheels on both sides, and sternwheelers, which have a
single wheel at the back. This paper craft model is based on the sidewheeler type.

A1
A2
A3
A4
A5
A6
A7 A8 A9 A10 A11 A12
PAGE02
Paddle Steamer (Sidewheeler) : Pattern

B1
B7
B8
B9
B2
B3 B4 B5 B6
PAGE03
Paddle Steamer (Sidewheeler) : Pattern

C1 C2
C3
C4
C5
C6
PAGE04
Paddle Steamer (Sidewheeler) : Pattern

D1 D2
D3 D4
D5
D6
D7
D8
PAGE05
Paddle Steamer (Sidewheeler) : Pattern

E1 E2
E3 E4 E5
E6 E7
PAGE06
Paddle Steamer (Sidewheeler) : Pattern

F1
F2
F3
F4
F5
F6
F7 F8
PAGE07
Paddle Steamer (Sidewheeler) : Pattern

G1 G2
G3
G4
G5
G6
G7 G8
G9
PAGE08
Paddle Steamer (Sidewheeler) : Pattern

H1
H3
H4
H5
H6
H7
H8
H9
H10
H11
H2
PAGE09
Paddle Steamer (Sidewheeler) : Pattern

I1
I2
I3
I4
I5
I6
I7 I8
I9
PAGE10
Paddle Steamer (Sidewheeler) : Pattern