Canon CREATIVE PARK Sea lion User manual

Assembly Instructions
1. Carefully cut out the parts.
2. Fold along the dotted lines, making mountain
or valley folds as indicated.
3. Attach the glue spots on each part together.
4. Glue the parts together, and you're done!
*Please read the Assembly Instructions
carefully before you begin.
Tools
Scissors, Glue (We recommend quick-drying paper glue.)
How to assemble your model neatly
Scoring along the fold lines in advance with a dried
up pen or a ruler with slightly sharp corners will result
in a neater model.
*Be careful not to press too hard as the paper may tear.
Notation Key
Scissors line Mountain fold
Cut in line Valley fold
Glue spot
Caution
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Sea lion : Assembly Instructions

Assemble the head
Cut out parts A and B,
and attach the glue tabs
marked with arrows together.
Cut out part D, and attach the glue tab
to the adjacent area.
Put glue on the area of the reverse side highlighted here,
fold and glue together, and the front flipper (left) is complete.
Do the same to assemble the opposite part E (front flipper (right)).
Attach the glue tabs
to give the head its shape.
Cut out part C, and
glue it to the inside of
the assembled part.
Assemble the front flippers
Glue
Assemble the chest
Cut out parts F and G, and join them together by gluing.
When they are joined,
next attach the glue tabs
indicated by arrows.
Do the same for
the opposite side. Lastly, tuck the joint inside.
After you've tucked it inside, if you open
the folded parts back up inside it will
prevent it from slipping out.
Fold down the edges
and tuck inside.
Close the part up
and glue together.
Sea lion : Assembly Instructions

Close the part up into a cylinder shape,
and glue together.
Cut out parts I and J, and
join them together by gluing.
For part K, first cut out the square around the part
marked by the red lines. Fold along the center line
and glue together at the back.
After gluing,
follow the scissors line
to cut out the part.
Close the part up into
a cylinder shape,
and glue together.
Glue
After cutting out, attach part L and
insert it into the assembled tail.
Assemble and insert part M,N
(back flipper (right)) for the other side,
in the same way.
After you've tucked
it inside, if you open
the folded parts
back up inside it will
prevent it from
slipping out.
Sea lion : Assembly Instructions
Assemble the belly
Cut out part H, and attach the glue tabs
to their adjacent areas.
Assemble the tail
Assemble the back flippers

Cut in line
Front flippers
Head
Chest
Belly Back flippers
Tail
*Insert the front flipper
on the other side too.
You can move the assembled sea lion's head
and flippers in many different ways.
Try out different poses!
Cut out part O, and attach the glue tabs
to their adjacent areas.
Cut out part P and attach
to the top and bottom of
the assembled part.
Close the part up
and glue together.
Align the patterns
and attach.
Cut in line
Sea lion : Assembly Instructions
Assemble the sea lion
Assemble the ball
Attach the joints of the assembled parts
in the following order:
tail belly chest front flippers head.
Your sea lion is complete!
Fold the sides of the joint, and insert
into the hole. After you've inserted it inside,
if you open the folded parts back up inside
it will prevent it from slipping out.

Assemble the hula hoop
Assemble the other items
[ How to balance the ball ]
Glue
As you did for the back flippers,
cut out the square and
glue the part at the back.
After gluing, follow
the scissors lines
to cut out the part.
*Make 3 in total.
Align the slots on the hole
in the ball with the left and
right sides of the sea lion's face.
After cutting out,
attach the parts
so they make a ring.
Assemble the other items by attaching the glue tabs as shown by the arrows.
When you are finished, use the different items and have fun with your sea lion!
Ball
Hula hoop
Sea lion's food
Bucket
Bucket handle
Platform
Glue
Cut in line
Sea lion : Assembly Instructions