Canon CREATIVE PARK Yajirobe User manual

Tools
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Caution
Assembly Instructions
1: Carefully cut out the parts.
2: Fold along the dotted lines, making mountain or valley folds
as indicated.
3: Attach the glue tabs on each part to assemble the model.
(Read the assembly instruction for more information.)
4: Attach the parts in order.
(Read the assembly instruction for more information.)
5: Your paper craft model is finished!
Scissors, glue (We recommend craft glue.)
Explanation of Symbols
Cut line
Valley fold
Mountain fold
Glue up to this line
Glue tab
Attach to a point within the same piece
Glue tab
Attach to a separate piece
Glue together
Insert (Do not apply glue)
A balancing toy is a toy that rocks back and forth
without falling over, due to its center of gravity being
below the fulcrum point. This balancing toy is based
on a toco toucan, with its distinctive large beak. Its
beak and wings also move as it rocks. Find the
proper balance and have fun playing!
Balance Toy "Yajirobe" (Toco Toucan)
Balance Toy "Yajirobe" (Toco Toucan) : Assembly Instructions

1. Assemble and and attach them together.
2. Assemble and attach it to .
3. Fold and glue down and . Next, assemble , glue and to the inside, and attach .
Lastly, glue together so that it is covered.
Do not put glue on this glue tab yet.
Put glue here.
Assembling the main part
Fold and glue together here.
Fold and glue together here.
Balance Toy "Yajirobe" (Toco Toucan) : Assembly Instructions

4. Adjust the balance of the bottom part of the beak and insert it into the body.
6. Attach and to . Next, glue , , and to .
Once it is balanced, add glue.
Place it on a vertical piece of
paper to adjust the balance.
If the beak side seems too light,
continue adding to the inside
of until it is balanced.
Insert into the back of the body to attach.
Simply attach and do not glue.
5. Assemble and , and and attach each together.
Assembling the tail
Place glue here only.
Attach and so that they
are held between and .
Balance Toy "Yajirobe" (Toco Toucan) : Assembly Instructions

7. Assemble and attach and and assemble and . Next, glue , , and to .
8. Assemble and and attach them together.
Assembling the stand
9. Assemble and then attach it to . Lastly, place the Toucan on the stand and it is complete.
Put glue only on the longest glue tab.
Close the flap after attaching and to each other.
Place glue here only.
Close the flap after attaching
and to each other.
Assembling the weight
Fold and glue down .
Then, assemble and place
inside before finishing.
Balance Toy "Yajirobe" (Toco Toucan) : Assembly Instructions