Canvas SUMMERHILL 088-2036-6 User manual

ASSEMBLY INSTRUCTIONS
Toll-free: 1-888-670-6684
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
SUMMERHILL
PRODUCT NO. 088-2036-6
MOTION CHAIR

Imported for Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Made in Vietnam

3Important Safety Instructions
Parts List
Assembly
Cleaning and Maintenance
Technical Data
Warranty
4
5
8
8
9
3
Warning! To reduce the risk of serious injury, read the following safety
instructions before assembling and using the chair.
• This product is intended for domestic outdoor use only.
• The product should be placed on flat, horizontal ground.
• Any assembly or maintenance of the product must be carried out by adults only.
• Arrange necessary manpower when assembling or moving the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary.
• Keep children and pets away while setting up the chair.
• Check all of the nuts and bolts periodically for tightness. When required, tighten
them again.
• Repairing and replacing parts should be done by a qualified technician.
• Use the correct bolts as indicated.
•
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
• Children should always be under direct adult supervision while using this product.
• Retain these assembly instructions for future reference.
Caution! Always keep children under close supervision while they are using or are
around this product.
Never leave children unattended.
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT: Retain for future reference and read carefully.

4
PARTS LIST
PRODUCT NO. 088-2036-6
A
M6x35 mm Bolt - 1
1
B
M8x30 mm Bolt - 8
4
3
Seat Post - 1
Swing Bar - 2
2
Seat Assembly - 1
Support Frame - 1
6
Back Cushion - 1
5
Base Assembly - 1
7
Seat Cushion - 1
F
d8.5xD12.5x1.5 mm Washer 24
E
D
d6.5xD30x2.0 mm Washer - 1
d8.5xD17x1.6 mm Washer - 4
C
M8x40 mm Bolt - 4
G
d8.5xD12x2.1 mm Washer 4
Tools (Not Included)
H
M8x1.25 Jam Nut - 4

• Proper placement of your chair is essential.
• Do not place the product underneath electrical lines.
• Keep children away during assembly.
• This product contains small parts which can be swallowed by children.
• Keep fingers away from the places where they can be pinched or trapped.
• Do not attempt to assemble the chair if any parts are missing.
ASSEMBLY
5
CAUTION!
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-888-670-6684
or have damaged or missing parts, please call our customer service
toll-free helpline. Contact us for assistance; we’re here to help.
If you have questions regarding your product, require warranty assistance,

6
ASSEMBLY
Step 1
Requires: 1, 2, 3, B, and F
Turn the swivel rocker chair upside down, fasten the support frame 2to the
seat assembly 1and the swing bars 3by using bolts Band washers F. Make
sure that all of the bolts have been tightened completely.
Step 2
Requires: 2, 4, C, E, G, and H
Place the seat post 4onto the brace of the support frame 2. Fasten them
together by using bolts C, washers (Eand G), and jam nuts H. Make
sure that all of the bolts have been tightened completely.
B F
FB
F
F
B
F
F
F
1
2
3
3
H
G
G
E
E
C
C
H
4
2
EGH
C
PRODUCT NO. 088-2036-6

Step 3
Requires: 4, 5, A, and D
Insert the seat post 4into the hole in the centre of the base assembly 5.
Fasten them together by using bolt Aand washer D. Make sure that all of
the bolts have been tightened completely. Secure all of the bolts by using
wrenches Ⅰ
, Ⅱ, Ⅲ, and Ⅳ.
Step 4
Requires: 6 and 7
Place cushions (6and 7) onto the chair.
A D
Note:
For ease with installation, we recommend that the seat post 4be lightly
oiled or waxed before fastening it to the base assembly 5.
4
5
6
7
A
D
7
ASSEMBLY
ⅠⅡⅢ Ⅳ

CLEANING AND MAINTENANCE
Dimensions (LxWxH)
Product weight
37 x 35 x 36"
38 lb 2 oz
94 x 89 x 91.5 cm
17.3 kg
TECHNICAL DATA
CAUTION!
• Check all of the bolts and nuts periodically for tightness, fastening them again as required.
• Disassemble the chair in the reverse order of the assembly steps. Always disassemble
the chair completely. A partially disassembled chair is not stable enough to resist wind
and bad weather, and therefore can be damaged and/or cause damage.
• Wash frame and wicker parts with mild soap and water, rinse thoroughly, and dry completely.
Do not use bleach, acid, or other solvents on the frame or wicker parts.
• The cushions may be washed on the surface only by using mild soap and water or
commercial foaming upholstery cleaner if necessary. If washed, rinse well and hang to dry.
Do not machine wash or dry.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all of the bolts and fasteners on a regular basis to ensure proper
performance and safety of your chair.
• In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry
and protected area during off season periods.
• Clean the chair with mild soap and water. Rinse thoroughly, and wait until the product
is dry before reassembling it.
8PRODUCT NO. 088-2036-6

WARRANTY
9
This Canvas product carries a five (5) year warranty against defects in
workmanship and materials. Trileaf Distribution agrees to replace the
defective product free of charge within the stated warranty period, when
returned by the original purchaser with proof of purchase.This product is
not guaranteed against breakage due to misuse and/or abuse.