Canvas CALEDON 168-0077-0 User manual

CALEDON HALL TREE
MODEL NO. 168-0077-0
ASSEMBLY INSTRUCTIONS
HAVING TROUBLE?
TOLL-FREE:
1-888-670-6684

TABLE OF CONTENTS
CALEDON HALL TREE 3
We believe the power of decor and how
it makes up the fabric of your home.
That's why the CANVAS assortment gets
its inspiration from Canadians and the
way they live.
From on-trend furniture pieces, to
Holiday Decor and Outdoor Living,
CANVAS makes it easy to refresh your
your unique style and
the way you live.
We welcome your thoughtful
comments and feedback so please
visit our website to tell us about
your experience.
We would love to see how you bring
CANVAS to life. Please share your
photos using #mycanvasstyle.
Parts List/Exploded View 4
Step-by-Step Instructions 8
Warranty 31
Caring for your item 31
TOOLS REQUIRED
WARNING! TO REDUCE THE RISK OF SERIOUS INJURY,
READ THE FOLLOWING SAFETY INSTRUCTIONS BEFORE
ASSEMBLING AND USING THE HALL TREE.
To avoid damage, ensure screws are hand tightened.
DO NOT USE POWER TOOLS TO ASSEMBLE YOUR UNIT
Screwdriver 2 people
• This product is intended for domestic indoor use only.
• Arrange necessary manpower when assembling or moving the product.
• Do not push furniture, especially on a carpeted floor. Have someone help
you lift heavy items and set it in place.
• Check all screws periodically for tightness. When required, tighten them again.
• Do not exceed maximum weight capacity per shelf and hooks as indicated on
page 30 of manual.
• The product should be placed on a flat horizontal surface.

CALEDON HALL TREE CALEDON HALL TREE4 5
ITEM DESCRIPTION QUANTITY
A Upper Left Side Frame 1
B Lower Left Side Frame 1
C Connect Tubes 2
D Connect Tubes 2
E Connect Tubes 2
F Grid Shelf 1
G Upper Middle Frame 1
H Lower Middle Frame 1
I Small Connect Tubes 4
J Big Connect Tubes 6
K Upper Right Side Frame 1
L Lower Right Side Frame 1
M Upper Shelf 1
N Middle Shelf 1
O Lower Shelf 1
P Bottom 1
Q Upper Back Panel 1
R Top 1
S Drawer Back Panel 1
T Drawer Sides 2
U Drawer Bottom 1
V Drawer Front 1
W Drawer Top 1
PARTS LIST EXPLODED VIEW
A
B
C
D
F
E
G
H
N
T
U
V
W
O
P
Q
R
S
I
J
K
L
M

CALEDON HALL TREE CALEDON HALL TREE6 7
ITEM DESCRIPTION QUANTITY
1 Wood Dowels Ø7.8 x 30 mm 16
2 Cam Bolts (big) 4
3 Cams (big) 4
4 Screws Ø4 x 30 mm 8
5 Screws Ø4 x 35 mm 18
6 Hinges 2
7 Screws Ø4 x 14 mm 12
20 Screws Ø4 x 14 mm 6
8 Screws Ø4 x 12 mm 12
9 Pads 2
10 Screws Ø5 x 50 mm 10
11 Hooks 3
12 Anti-Tip Restraints 2
13 Flat Washers 4
14 Wall Plugs 2
15 Spring Hinge 1
16 Bolts M6 x 15 mm 55
18 Screws Ø4 x 12 mm 8
17 Hexagon Wrench 1
19 Glue 1
PARTS LIST EXPLODED VIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

×4
CALEDON HALL TREE CALEDON HALL TREE8 9
STEP 1
REQUIRES H, J, 16, 17
NOTE: Two people are needed to build this unit.
Connect four BIG CONNECT TUBES (J) with the LOWER MIDDLE FRAME (H),
use four BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP 2
REQUIRES J, L, 16, 17
Connect four BIG CONNECT TUBES (J) with the LOWER RIGHT SIDE FRAME (L), use
four BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP-BY-STEP INSTRUCTIONS
J
J
J
J
16
16
16 17
17
17
16
16
17
J
J
J
J
L
H
×4
NOTE: Dip the ends of the wood dowels into a bit of glue (19) before inserting
them into the holes of the panel.

CALEDON HALL TREE CALEDON HALL TREE10 11
STEP 3
REQUIRES E, F, H, 16, 17
Connect two CONNECT TUBES (E) with the LOWER MIDDLE FRAME (H), use two
BOLTS M6 x 15 MM (16).
Connect GRID SHELF (F) with the LOWER MIDDLE FRAME (H), use four BOLTS
M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP 4
REQUIRES B, E, F, 16, 17
Connect two CONNECT TUBES (E) with the LOWER LEFT SIDE FRAME (B), use two
BOLTS M6 x 15 MM (16).
Connect GRID SHELF (F) with the LOWER LEFT SIDE FRAME (B), use four BOLTS
M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP-BY-STEP INSTRUCTIONS
16
16
17
16 17
16
16
17
17
E
E
E
E
F
F
B
H
×6×6

CALEDON HALL TREE CALEDON HALL TREE12 13
STEP 5
REQUIRES I, J, K, 16, 17
Connect two BIG CONNECT TUBES (J) with the UPPER RIGHT SIDE FRAME (K), use
two BOLTS M6 x 15 MM (16).
Connect four SMALL CONNECT TUBES (I) with the UPPER RIGHT SIDE FRAME (K), use
four BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP 6
REQUIRES G, I, J, 16, 17
Connect two BIG CONNECT TUBES (J) with the UPPER MIDDLE FRAME (G), use
two BOLTS M6 x 15 MM (16).
Connect four SMALL CONNECT TUBES (I) with the UPPER MIDDLE FRAME (G),
use four BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP-BY-STEP INSTRUCTIONS
16 16
K
I
II
I
I
I
I
I
J
J
J
J
G
17
16 17
16
17
17
×6×6

CALEDON HALL TREE CALEDON HALL TREE14 15
STEP 7
REQUIRES C, D, G, 16, 17
Connect two CONNECT TUBES (C) with the UPPER MIDDLE FRAME (G), use
two BOLTS M6 x 15 MM (16).
Connect two CONNECT TUBES (D) with the UPPER MIDDLE FRAME (G), use
two BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP 8
REQUIRES A, C, D, 16, 17
Connect two CONNECT TUBES (C) with the UPPER LEFT SIDE FRAME (A), use
two BOLTS M6 x 15 MM (16).
Connect two CONNECT TUBES (D) with the UPPER LEFT SIDE FRAME (A), use
two BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP-BY-STEP INSTRUCTIONS
16
16
G
C
C
D
D
C
C
D
D
A
17
16
17 17
×417
16 ×4

CALEDON HALL TREE CALEDON HALL TREE16 17
STEP 9
REQUIRES A, B, G, H, K, L, 16, 17
Connect UPPER RIGHT SIDE FRAME (K) with the LOWER RIGHT SIDE FRAME (L),
use six BOLTS M6 x 15 MM (16).
Connect the UPPER MIDDLE FRAME (G) with the LOWER MIDDLE FRAME (H), use
six BOLTS M6 x 15 MM (16).
Connect the UPPER LEFT SIDE FRAME (A) with the LOWER LEFT SIDE FRAME (B),
use three BOLTS M6 x 15 MM (16).
Hand tighten the bolt with HEXAGON WRENCH (17).
STEP 10
REQUIRES Q, 11, 20
Fasten three HOOKS (11) to UPPER BACK PANEL (Q), use six SCREWS Ø4 x 14 MM (20).
STEP-BY-STEP INSTRUCTIONS
16
16
Q
11
11
G
A
K
B
H
L
20
20
17
17
16 ×15
×3×6

CALEDON HALL TREE CALEDON HALL TREE18 19
STEP 11
REQUIRES D, Q, 8
Fasten UPPER BACK PANEL (Q) to CONNECT TUBE (D), use four
SCREWS Ø4 x 12 MM (8).
STEP 12
REQUIRES C, J, R, 5
Fasten TOP (R) to CONNECT TUBE (C) and BIG CONNECT TUBE (J), use eight
SCREWS Ø4 x 35 MM (5).
STEP-BY-STEP INSTRUCTIONS
Q
D
D
8
8
5
5
5
R
J
C
×4×8

CALEDON HALL TREE CALEDON HALL TREE20 21
STEP 13
REQUIRES I, J, M, N, O, P, 4, 5
Fasten UPPER SHELF (M), and MIDDLE SHELF (N) to SMALL CONNECT TUBE (I),
use eight SCREWS Ø4 x 30 MM (4).
Fasten LOWER SHELF (O), and BOTTOM (P) to BIG CONNECT TUBE (J), use eight
SCREWS Ø4 x 35 MM (5).
STEP 14
REQUIRES T, 1
Insert six WOOD DOWELS Ø7.8 x 30 MM (1) to DRAWER SIDE (T).
Repeat this step on the other piece of DRAWER SIDE (T).
STEP-BY-STEP INSTRUCTIONS
J
4 5
5
M
N
O
P
4
I
1
1
T
×8×8×6

CALEDON HALL TREE CALEDON HALL TREE22 23
STEP 15
REQUIRES S, V, 1, 2
Insert two WOOD DOWELS Ø7.8 x 30 MM (1) to DRAWER BACK PANEL (S).
Turn two CAM BOLTS (BIG) (2) into the DRAWER BACK PANEL (S).
Insert two WOOD DOWELS Ø7.8 x 30 MM (1) to DRAWER FRONT (V).
Turn two CAM BOLTS (BIG) (2) into the DRAWER FRONT (V).
STEP 16
REQUIRES S, T, V, 3
Insert four CAMS (BIG) (3) into the DRAWER SIDE (T).
Connect the DRAWER SIDE (T) with the DRAWER FRONT (V) and
DRAWER BACK PANEL (S).
Hand tighten four CAMS (BIG) (3).
STEP-BY-STEP INSTRUCTIONS
1 2
2
1
1
T
T
S
S
VV
2
3
3
×4×4×4

CALEDON HALL TREE CALEDON HALL TREE24 25
STEP 17
REQUIRES S, T, U, V, 10
Fasten DRAWER BOTTOM (U) to the two DRAWER SIDES (T),
DRAWER BACK PANEL (S) and DRAWER FRONT (V), use ten
SCREWS Ø5 x 50 MM (10).
STEP 18
REQUIRES W, 6, 7
Fasten two HINGES (6) to DRAWER TOP (W), use four SCREWS
Ø4 x 14 MM (7).
STEP-BY-STEP INSTRUCTIONS
6
6
7
7
W
10
10
S
T
T
U
V
×10 ×2×4

CALEDON HALL TREE CALEDON HALL TREE26 27
STEP 19
REQUIRES S, W, 8, 15
Fasten the SPRING HINGE (15) to DRAWER TOP (W), use four
SCREWS Ø4 x 12 MM (18).
STEP 20
REQUIRES S, V, W, 6, 7, 9, 15, 18
Fasten the SPRING HINGE (15) to DRAWER BACK PANEL (S), use four
SCREWS Ø4 x 12 MM (18).
Fasten HINGE (6) to DRAWER BACK PANEL (S), use eight SCREWS
Ø4 x 14 MM (7). Attached two PADS (9) to DRAWER FRONT (V).
STEP-BY-STEP INSTRUCTIONS
6
7
W
W
S
S
V
18
18
18
18
15
7 9
9
15
15
×1×4
×8×2×4

CALEDON HALL TREE CALEDON HALL TREE28 29
STEP 21
REQUIRES E, S, U, 8
Fasten DRAWER BACK PANEL (S) and DRAWER BOTTOM (U) to CONNECT
TUBE (E), use six SCREWS Ø4 x 12MM (8). Hand tighten
the screws.
STEP 22
REQUIRES R, 8, 12, 13
Fasten two FLAT WASHERS (13) and two ANTI-TIP RESTRAINTS (12) to the back
of TOP (R), use two SCREWS Ø4 x 12MM (8).
STEP-BY-STEP INSTRUCTIONS
8
8
8
8
S
U
812
12
13
13
R
E
E
×6×2×2×2

CALEDON HALL TREE CALEDON HALL TREE30 31
STEP-BY-STEP INSTRUCTIONS
STEP 23
REQUIRES 5, 12, 13, 14
Insert two WALL PLUGS (14) into your wall.
Fasten two FLAT WASHERS (13) and two ANTI-TIP RESTRAINTS (12) to the
wall, use two SCREWS Ø4 x 35 MM (5).
5
12
513 14
14
13
27 lb (12 kg)
14 lb (6 kg)
18 lb 12 oz (8.48 kg)
22 lb (10 kg)
286 lb (129.8 kg)
12 lb 1 oz (5.5 kg)
19 lb 13 oz (8.98 kg)
23 lb 1 oz (10.47 kg)
WARRANTY
MODEL NO. 168-0077-0
×2×2×2
CARING FOR YOUR ITEM
1-YEAR LIMITED WARRANTY
Made in China
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Wipe clean with a damp cloth.
Do not use solvent-type cleaning
agents. Do not use bleach, acid
or other abrasive cleaners.
1
This CANVAS™ product carries a one (1 ) year warranty against defects in workmanship
and materials.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Trileaf Distribution agrees to replace the defective product free of charge within
the stated warranty period, when returned by the original purchaser with proof of
purchase.

Exclusively at Canadian Tire

PORTEMANTEAU CALEDON
NO DE MODÈLE : 168-0077-0
INSTRUCTIONS D’ASSEMBLAGE
DES DIFFICULTÉS?
NUMÉRO SANS FRAIS :
1 888 670-6684

PORTEMANTEAU CALEDON 3
4
8
31
31
Nous croyons au pouvoir de la décoration
et à la façon dont elle façonne votre maison.
C’est pourquoi nous nous inspirons des gens
du pays et de leur mode de vie pour concevoir
l’assortiment de CANVAS.
Qu’il soit question de meubles tendance, de
décorations des Fêtes ou d’articles de Vie au
jardin, CANVAS vous permet de rafraîchir
facilement votre espace afin qu’il reflète votre
style unique et votre façon de vivre.
Nous vous invitons à nous faire part de vos
commentaires, alors veuillez visiter notre site
Web pour nous faire part de votre expérience.
Nous aimerions voir comment vous donnez vie à
la marque CANVAS. Veuillez partager vos photos
grâce au mot-clic #MonStyleCANVAS.
TABLE DES MATIÈRES
• Cet article est exclusivement conçu pour un usage résidentiel à l’intérieur.
• Prévoyez la main-d’œuvre nécessaire pour assembler ou déplacer l’article.
• Cet article doit être placé sur un sol plat.
• Ne poussez pas les meubles, surtout sur un plancher recouvert de tapis.
Demandez à quelqu’un de vous aider à soulever et à déplacer des articles
lourds.
• Vérifiez toutes les vis périodiquement pour voir si elles sont bien serrées.
Resserrez-les au besoin.
• Ne dépassez pas les capacités maximales des tablettes et des crochets
indiquées à la page 30 de ce manuel.
AVERTISSEMENT! POUR RÉDUIRE LE RISQUE DE BLESSURES
GRAVES, LISEZ LES CONSIGNES DE SÉCURITÉ SUIVANTES
AVANT D’ASSEMBLER ET D’UTILISER LE PORTEMANTEAU.
OUTILS REQUIS
Serrez les vis à la main pour éviter tout dommage.
N’UTILISEZ PAS D’OUTILS ÉLECTRIQUES POUR ASSEMBLER CET ARTICLE.
Tournevis 2 personnes
Liste des pièces/vue éclatée
Directives détaillées
Garantie
Entretien de votre article

PORTEMANTEAU CALEDON PORTEMANTEAU CALEDON4 5
PIÈCE DESCRIPTION QUANTITÉ
A Cadre supérieur gauche 1
B Cadre inférieur gauche 1
C Tubes de raccord 2
D Tubes de raccord 2
E Tubes de raccord 2
F Tablette grillagée 1
G Cadre central supérieur 1
H Cadre central inférieur 1
I Petits tubes de raccord 4
J Grands tubes de raccord 6
K Cadre supérieur droit 1
L Cadre inférieur droit 1
M Tablette supérieure 1
N Tablette centrale 1
O Tablette inférieure 1
P Bas 1
Q Panneau arrière supérieur 1
R Dessus 1
S Panneau arrière du tiroir 1
T Côtés du tiroir 2
U Bas du tiroir 1
V Avant du tiroir 1
W Dessus du tiroir 1
LISTE DES PIÈCES VUE ÉCLATÉE
A
B
C
D
F
E
G
H
N
T
U
V
W
O
P
Q
R
S
I
J
K
L
M