Canyon CNS-SW6 User manual

TABLE OF CONTENTS
INTRODUCTION 2
SAFETY PRECAUTIONS 2
PACKAGE CONTENTS 3
DEVICE OVERVIEW 3
BUTTON OPERATION SUMMARY 4
BASIC OPERATION 5
REAL TIME MODE 6
ALARM TIME MODE 7
ENABLING DAILY ALARM/HOURLY CHIME 7
ALARM SETTINGS 7
CHRONOGRAPH MODE 8
STARTING/STOPPING CHRONOGRAPH 8
RECORDING/RECALLING LAP TIME 8
TIMER MODE 9
SELECTING STARTING TIME 9
TIMER SETTINGS 9
ALTIMETER MODE 10
OPERATING ALTIMETER 10
ABSOLUTE ALTITUDE SETTINGS 10
RELATIVE ALTITUDE ADJUSTMENT 11
BAROMETER MODE 12
MAINTENANCE 13

Thank you for purchasing CANYON CNS-SW6, a multi-functional watch device with
thermometer, barometer, and altimeter function. You have made an excellent choice
and we hope you will enjoy all of its exciting features. To fully utilize the functions
and features of CANYON CNS-SW6, please read through the user manual carefully
before using the product, and follow all of the procedures in the manual to fully
enjoy all features of the product.
Introduction
Safety Precautions
Please observe all safety precautions before using the device. Please follow all
procedures outlined in this manual to properly operate the device.
zDo NOT attempt to disassemble or alter any part of the device that is not
described in this guide.
zDo NOT place the device near a heat source or directly expose it to flame.
zNever place the device in vicinity of equipments generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions.
zAvoid exposing the device to extreme temperatures or chemicals such as
gasoline and alcohol.
zAvoid strong impacts for it will damage the device permanently.
zStore device and its accessory at a dry and well ventilated location when they
are not in use.

Package Contents
Product Image Item Name
CANYON CNS-SW6 Main Unit
Quick Guide
Documentation CD
Device Overview
ADJUST
Button
ST./STP.
Button
Mode
Button
MODE
Button
ALTI-BARO
Button
LIGHT
Button

Button Operation Summary
MODE Button
zPress to cycle through 4 functional modes.
zDuring Settings Mode, press to cycle through different settings.
ADJUST Button
zPress and hold to enter settings mode.
zPress to recall lap memories in Chronograph Mode.
ST./STP. Button
zPress to start/stop time counting in Chronograph and Timer Mode.
zPress to toggle between units in Sensor Modes.
zPress to select items in Setting Modes.
ALTI-BARO Button
zPress to toggle between Time-Keeping Modes and Sensor Modes.
zPress to increase values at Settings Mode.
zPress to record lap memories in Chronograph Mode.
zPress and hold to reset lap memories in Chronograph Mode.
zPress to select timer preset value in Timer Mode.
LIGHT Button
zPress to turn on back light for 3 seconds

Basic Operation
CANYON CNS-SW6 is a multi-functional watch device that contains 4 functional
modes including Real Time Mode, Alarm Time Mode, Chronograph Mode, and Timer
Mode and 2 sensor modes including Altimeter Mode and Barometer Mode. Press
MODE to cycle through 4 functional modes and ALTI-BARO to toggle between Real
Time Mode and Sensor Modes.

Real Time Mode
Time and Date Settings
zPress and hold ADJUST for 2
seconds to enter Settings Mode.
zPress ST./STP. to cycle through
different digits and settings. Press
ALTI-BARO to adjust values and
switch between time formats.
zPress ADJUST to save modified
settings and exit Settings Mode.

Alarm Time Mode
Enabling Daily Alarm/Hourly Chime
zUpon entering, Alarm Time Mode
indicator ALM will be displayed at
the side of screen.
zPress ST./STP. to switch between
daily alarm1 and daily alarm2
display.
zPress ALTI-BARO to switch daily
alarms on/off and hourly chimes at
daily alarm1 or daily alarm2 display.
A daily alarm indicator and/or
hourly chime indicator will be
displayed on the screen when
switched on.
Alarm Settings
zPress and hold ADJUST for 2
seconds at Alarm1/2 display to enter
Settings Mode.
zPress ST./STP. to shift through
different digits and press
ALTI-BARO to adjust values.
zPress ADJUST to save modified
settings and exit Settings Mode.

Chronograph Mode
Starting/Stopping Chronograph
zUpon entering, the Chronograph
Mode indicator CHR will be
displayed at the side of screen.
zThe device measures elapsed time
and lap times.
zPress ST./STP. to start counting.
Press the button again to stop
counting and the elapsed time will
be displayed on the screen. Press
the button the third time to resume
counting.
zPress and hold ALTI-BARO for 2
seconds to reset counter.
Recording/Recalling Lap Time
zPress ALTI-BARO while counting to
display current lap time and press
the button again to display current
counting.
zUp to 10 lap times can be recorded.
zPress ADJUST to review recorded
lap times when chronograph is
stopped.
zPress and hold ALTI-BARO for 2
seconds to reset counter.

Timer Mode
Selecting Starting Time
zUpon entering, the Timer Mode
indicator TMR will be displayed at
the side of screen.
zPress ALTI-BARO to select 1 of 4
preset starting time value and user
preset starting time value.
zPress ST./STP. to start count down.
The residual time will be displayed
on the screen.
zPress ST./STP. to stop timer during
count down. Press the button again
to resume countdown.
zPress ALTI-BARO to reset count-
down timer to target time.
Timer Settings
zPress and hold ADJUST for 2
seconds to adjust user preset
starting time value.
zPress ST./STP. to shift through
different digits and press
ALTI-BARO to adjust values.
zPress ADJUST to save modified
settings and exit Settings Mode.

Altimeter Mode
Operating Altimeter
zPress ALTI-BARO at Real Time
Mode to cycle through Altimeter
Mode and Barometer Mode.
zThe current temperature/altitude/
time is displayed at the top/
middle/bottom row of device screen.
NOTE:
To obtain more accurate readings, please
keep the device away from body which
will minimize effect of body heat.
zPress ST./STP. to switch between
measurement units including
altitude units meter(m)/feet(ft) and
temperature units (˚C)/ (˚F).
Absolute Altitude Settings
zAbsolute altitude is the difference
between current altitude and sea
level (assuming that air pressure at
sea level is 1013.21mbar)
NOTE:
A precise altitude indication such as sea
level (0m) or an altitude sign pole is
required before calibration.
zPress and hold ADJUST for 2
seconds to adjust altitude.
zPress ST./STP. to shift through
different digits and press
ALTI-BARO to adjust values.
zPress ADJUST to save modified
settings and exit Settings Mode.