Canyon Oregano User manual

QUICK GUIDE V 1
CNS-SW81
Smartwatch
«Oregano»
STYLISH AND SPORTY DESIGN

1. Touch Screen
2. Functional button
3. Heart rate sensor
4. Charging pins
1. Overview
Please use the charging kit to charge your watches:
Open charging tool, put the watches inside to
connect metal pins of the charger with the charging
pin of the watches. Make sure the charging icon has
appeared on the screen.
EN
1 2 3 4

Install Canyon Fit APP on phone
Download: Search for Canyon Fit APP or scan the
following QR code for the installation.
EN

EN
Connect bracelet with mobile phone
1. Enable Bluetooth on your smart phone.
2. Open «Canyon Fit» on your smart phone, set
your prole on Settings.
3. Tap «Pair device» on Settings.
4. Press «Start»
5. Search your device name, press it and press
Add device
Unbind bracelet with mobile phone
1. Open «Canyon Fit» on your smart phone
2. Tap «Unpair device» on Settings.
Operation Introduction
1. You can raise hand/press functional button to
light the screen.
2. Press the fuctional button to back to the main
screen
3. Long press the function button to switch on/off
• Turn on: Hold functional power button in 3
seconds
• Switch submenu/ shortcuts: Swipe up
• Switch main menu: Swipe up/ down
• Conrm: Tap the icon
• Return to watch face interface: Short press
2. How to use

EN
power button on any interfaces
• Check notications: Swipe from left to right on
watch face interface
3. Main menu
When turning on smart watch, you will see the watch
face. From watch face:
1. Go to Main Menu
a. Slide from right to left to enter
into main menu.
b. Swipe up and down to switch
the main menu.
c. Click the icon to enter the
Wed, May 23

EN
corresponding menu. Slide from left to right to
return to the previous menu.
2. Go to Notication shortcut page. Slide from left
to right.
3. Go to other shortcuts page. Swipe up and down.

EN
You can long press on the main screen to go to the
watch face interface quickly.
If you want to change the watch face of your smart
watch, press the current watch face for 3 seconds,
swipe up or down to go through the different watch
faces and tap on the one you want to select and use.
Watch face
4. Functions
Shortcut
1 2
3
Wed, May 23

EN
1. Bluetooth. This means the bluetooth status.
2. Do Not Disturb.
3. Brightness. You can click the icon to adjust the
display brightness.
Bluetooth
disconnected
Mode off
Bluetooth
connected
Mode on
Multi-Sport

EN
Click the sport mode to enter the multi-sport
function.
The bracelet has six types of sport activities
comprehensives: swimming, running, cycling, run
indoor, and hiking. You can choose which mode
you want, and then go to sport, and the bracelet will
record the motion data.
When you want to end the sport, slide the screen
right and choose to stop your sport and save it.
The bracelet will display your sport data. After
synchronizing with Canyon Fit, you can view your
sport record.

EN
PS: If the sport time less than 5mins, the data won’t
be saved.
Heart rate
Select the heart rate icon to monitor the heart
rate, click the screen you can check the last 7 times
heart rate data, and slide right to exit the heart rate
monitor.

EN
Sleep Monitor
After sync with Canyon Fit, you can check your heart
rate data on your smart phone.
The bracelet will monitor your
sleep automatically.
Click the interface, the
bracelet will display the sleep
data of the week.
When the sleep is stopped,
the bracelet will show your
sleep report with the time of
total sleep, light sleep and
deep sleep. After sync with
Canyon Fit, you can check
more detailed sleep report.

EN
Alarm
Notication
Weather
By clicking on the alarm , you can see the alarm
you set in the Canyon Fit application. When alarm
is on, its icon will be animated and the bracelet will
vibrate.
This includes phone calls,
text messages, QQ, WeChat,
Whatsapp, Facebook and Twitter
notications.

EN
Remote Capture
Music control
After sync with Canyon Fit, the bracelet will show the
weather forecast.
To enjoy this feature, make sure you
opened «Take photo» screen in Canyon
Fit app. Enabling Remote capture
function will let you take pictures remotely
from your Smart Watch.
Click to enter the control
interface of music.
Touch buttons on screen to play/
pause and change song. Note that
music player have to be opened
before using this feature. Swipe
from left to right to exit music
control.

EN
Sedentary
Settings
Click to enter the sedentary Settings
screen. Click the switch and slide left
to exit. You can set more conditions in
the app, including the start and end of
cycles, time intervals (minutes), thresholds
(steps), and repeated Settings (weeks).
Click the icon to enter the settings interface.
About
Click the icon, you can check the BT Mac
Address, Device name and Firmware
Vision of your bracelet.
Find Phone
After the bracelet is connected to Canyon
Fit App, click the icon, and the smart
phone will rings. iPhone will ring if there is
a Bluetooth connection regardless if the
screen display is on or off.

EN
Power Off
Click the icon, you can turn off your
bracelet.
Warning! Do not use in hot water. This can lead to
damage to the device!
Warranty liabilities
Warranty period starts from the date of the device’s
purchase from the Seller, authorized by Canyon.
The date of purchase is indicated in your sales
receipt or a waybill. During warranty period, a repair,
replacement or refund of payment for goods are
performed on discretion.
Manufacturer: Asbisc Enterprises PLC, 43, Diamond
Court, Kolonakiou Str, 4103, Limassol, Cyprus, Ayios
Athanasios, http://canyon.eu/

1. Тъч екран
2. Функционален
бутон
3. Сензор за пулс
4. Щифтове за
зареждане
1. Обзор
Моля използвайте комплекта за зареждане, за да
заредите часовника:
Отворете зарядното, поставете часовника вътре
така, че металните щифтове на зарядното да се
допрат до металните щифтове за зареждане на
часовника. Уверете се, че на екрана се появява
иконката, инидикираща зареждане.
BG
1 2 3 4

Инсталиране на приложението Canyon Fit на
телефона
Изтегляне: Потърсете приложението Canyon Fit
или сканирайте QR кода за инсталация.
BG

BG
Свържете гривната с мобилния телефон
1. Активирайте Bluetooth на вашия смартфон.
2. Стартирайте «Canyon Fit» на вашия смарт-
фон, настройте профила в Settings.
3. Натиснете «Pair device» в Settings.
4. Натиснете «Start»
5. Потърсете името на устройството си, натис-
нете го и след това натиснете «Add device»
Прекъсване на връзката между смартфона
и часовника
1. Отворете «Canyon Fit» на смартфона си
2. Натиснете «Disconnect device» в Settings.
Въведение в работата на устройството
1. За да включите екрана, можете да вдигнете
ръката си, или да натиснете функционалния
бутон на екрана.
2. Натиснете функционалния бутон, за да се
върнете към основния екран
3. Натиснете и задръжте функционалния
бутон, за да включите/изключите часовника
• Включване: Натиснете и задръжте функцио-
налния бутон за 3 секунди
• Преминаване към подменю/шорткът:
Плъзнете отдолу нагоре върху екрана
2. Начин на употреба

BG
• Преминаване към основно меню: Плъзнете
нагоре/надолу
• Потвърждаване: Натиснете върху иконата
• Връщане към основния интерфейс: на-
тиснете кратко бутона за включване
• Проверка на нотификации: Плъзнете
отляво надясно
3. Основно меню
При включване на часовника ще видите основния
интерфейс. От него:
1. Отидете в основното меню
a. Плъзнете отдясно наляво,
за да влезете в основното
меню.
b. Плъзнете нагоре и надолу,
Wed, May 23

BG
за да превключите основното меню.
c. Натиснете икона, за да влезете в
съответното меню. Плъзнете отляво над-
ясно, за да се върнете в предишното меню.
2. Преминете към страницата с шорткъти за
нотификации. Плъзнете отляво надясно.
3. Преминете към други страници с шорткъти.
Плъзнете нагоре и надолу.