CAS CL-3000 Series User manual

2

3
CONTENTS
1. GENERAL...........................................................................................................................8
1.1. Precautions......................................................................................................8
1.2. Introductions.................................................................................................10
1.3. Specifications................................................................................................11
1.4. Name andFunctions.................................................................................... 13
1.5. Symbols........................................................................................................ 16
1.6. KeyFunctions.............................................................................................. 17
1.7. InstallationoftheLabelRoll....................................................................... 20
2.PROGRAMMING........................................................................................................ 22
2.1. PLUProgramming...................................................................................... 27
2.1.1.CreateBy-WeightPLU (Menucode1120)............................................... 29
2.1.2.CreateBy-CountPLU(Menucode1120)................................................. 34
2.1.3.CreateBy-PCSPLU(Menucode1120)................................................... 36
2.1.4.EditingPLU (Menu code1120)............................................................... 37
2.1.5. Management(Menucode1140)............................................................... 37
2.1.5.1.CopyingPLU(Menucode1141).................................................................37
2.1.5.2. DeletingPLU (Menucode1142).................................................................39
2.1.5.3.MovingPLU(Menucode1143)..................................................................40
2.1.5.4.SelectingPLU fieldItems(Menucode1144).............................................41
2.1.5.5.PLU SaleCount(Menucode1145).............................................................41
2.1.6. SamplePrinting(Menucode1170).......................................................... 42
2.2. ProgrammingPLUDataTableI.................................................................43
2.2.1.Department(Menucode1210)................................................................ 43
2.2.1.1. New/EditDepartment(Menucode1211)............................................ 44
2.2.1.2.DeleteDepartment(Menucode1213)................................................. 45
2.2.2. Group(Menucode1220)........................................................................ 45
2.2.2.1. New/EditGroup(Menucode1221)..................................................... 45
2.2.2.2.DeleteGroup(Menucode1223)......................................................... 46
2.2.3. TaxRate(Menucode1230)..................................................................... 47
2.2.3.1. New/EditTaxRate(Menucode1231)................................................. 47
2.2.3.2.DeleteTaxRate(Menucode1233)...................................................... 48
2.2.4. SalesMessage(Menucode1240)............................................................ 49
2.2.4.1. New/EditSalesMessage(Menucode1241)........................................ 49
2.2.4.2.DeleteSalesMessage(Menucode1243)............................................. 50
2.2.5. Origin (Menucode1250)........................................................................ 50
2.2.5.1. New/EditOrigin (Menucode1251)..................................................... 50

4
2.2.5.2.DeleteOrigin(Menucode1253).........................................................51
2.2.6. Barcode(Menucode1260)......................................................................52
2.2.6.1.New/EditBarcode(Menucode1261)..................................................52
2.2.6.2. DeleteBarcode(Menucode1263).......................................................54
2.2.7. Tare(Menucode1270)............................................................................55
2.2.7.1.New/EditTare(Menucode1271)........................................................55
2.2.7.2. DeleteTare(Menucode1273).............................................................56
2.2.7.3.TareKey(Menucode1274)................................................................57
2.2.8. Unit Symbol(Menucode1280)...............................................................57
2.2.8.1. New/EditUnitSymbol(Menucode1281)............................................57
2.2.8.2. DeleteUnitSymbol(Menucode1283)................................................58
2.3. ProgrammingPLUDataTableII....................................................................59
2.3.1. Ingredient(Menucode1310) ...................................................................59
2.3.1.1.New/EditIngredient(Menucode1311)...............................................59
2.3.1.2. DeleteIngredient(Menucode1313)....................................................60
2.3.2. NutritionFacts(Menucode1320)............................................................61
2.3.2.1. New/EditNutritionFacts(Menucode1321).........................................61
2.3.2.2.DeleteNutritionFacts(Menucode1323).............................................67
2.4. DiscountProgramming....................................................................................68
2.4.1.Discount(Menucode1130).....................................................................68
2.4.1.1.New/EditDiscount(Menucode1131).................................................68
2.4.1.2. DeleteDiscount(Menucode1133)......................................................72
2.5. GloabalDiscountProgram..............................................................................75
2.5.1. GlobalDiscount(Menucode1530)..........................................................75
2.5.1.1.PrioritySetting(Menucode1531).......................................................75
2.5.1.2.Weight/Count/PCSDiscount(Menucode1532/1533/1534)..................76
2.6. SpeedKeySetting(Menucode1160)............................................................77
2.7. ProgrammingStoreData.................................................................................79
2.7.1.StoreData(Menucode1410)...................................................................79
2.7.1.1. New/EditStore(Menucode1411).......................................................79
2.7.1.2. DeleteStore(Menucode1413)............................................................80
2.7.2. Customer(Menucode1420)....................................................................81
2.7.2.1. New/EditCustomer(Menucode1421)................................................81
2.7.2.2. DeleteCustomer(Menucode1423).....................................................83
2.7.3. ScrollMessage(Menucode1430)............................................................83
2.7.3.1.Configuration (MenuCode1431)........................................................83
2.7.3.2.EditScrollMessage(MenuCode1432)...............................................84

5
2.7.4. Currency(Menucode1440).................................................................... 86
2.7.4.1. New/EditCurrency(MenuCode1441)............................................... 87
2.7.4.2. DeleteCurrency(Menucode1443)..................................................... 89
2.7.5. JobBatchSchedule(Menucode1450) .................................................. 89
2.7.5.1.New/EditJobBatchSchedule(Menucode1451) .................................. 89
2.7.5.2. DeleteJobBatch Schedule(Menucode1453) ........................................ 90
2.7.6. Scanner(Menucode1460) ............................................................................. 91
2.7.6.1.New/EditScannerConversionTable(Menucode1461) ....................... 91
2.7.6.2. DeleteScannerConversionTable(Menucode1463) ............................ 91
2.7.6.3.ScannerConfig(Menucode1464) .......................................................... 92
2.7.7. LabelFormatKeyTable(Menucode1470) ................................................. 93
2.8.ProgrammingGlobalSetting...................................................................... 94
2.8.1.GlobalLabelFormat(Menucode1510)................................................... 94
2.8.2.BarcodeFormat(Menucode1520).......................................................... 97
2.8.3.Tax(Menucode1540) ......................................................................... 100
2.8.3.1.SetGlobalTax(Menucode1541) ...................................................100
2.8.3.2.GlobalTaxNumber(Menucode1542) ............................................100
2.9. PrintingProgramming (Menucode1700)...............................................101
2.9.1. Printlabelitem(Menucode1710)..........................................................101
2.9.2. Markdown (Menucode1720)...............................................................103
2.9.3. PrinterHardware(Menucode1730)......................................................104
2.9.3.1.PrintMode(Menucode1731)..........................................................105
2.9.3.2.LabelSize/TicketSize(Menucode1732)..........................................105
2.9.3.3.SensorCalibration(Menucode1733)................................................107
2.9.3.4.Sensor&Motor(Menucode1734)...................................................107
2.9.3.5.Print Intensity(Menucode1735).......................................................108
2.9.3.6.AdjustFeed Length(Menucode1736)..............................................108
2.9.3.7. LabelPreprint(Menucode1737)......................................................109
2.9.3.8.AdjustReverseFeedLength (Menucode1738).................................109
2.9.4. SerialNumberFormat(Menucode1740)............................................... 110
2.9.5.Add-UpTotal(Menucode1750).............................................................111
2.9.6. Ticket(Menucode1760)....................................................................... 112
2.9.6.1.SelectTicketItem(Menucode1761)................................................. 112
2.9.6.2.SelectListItem(Menucode1762).................................................... 112
2.9.6.3SelectTicketFontSize(Menucode1763).......................................... 114
2.10.ProgrammingScaleConfiguration(Menucode1800)........................ 115
2.10.1. SaleMode(Menucode1810).............................................................. 115
2.10.2. OperationMode(Menucode1820)...................................................... 117
2.10.3. Department(Menucode1830)............................................................ 118
2.10.4. Date&Time(Menucode1840)........................................................... 118
2.10.5. User/SecurityConfiguration(Menucode1850)....................................120
2.10.5.1.New/Edit User(Menucode1851)....................................................120

6
2.10.5.2.ChangePassword(Menucode1852)...............................................122
2.10.5.3.Delete User(Menucode1854)........................................................123
2.10.5.4.ConfigPermission(Menucode1855)..............................................123
2.10.5.5.ClerkKey(Menucode1856)..........................................................125
2.10.6. Test (Menucode1860).........................................................................125
2.10.6.1.DisplayTest(Menucode1861)........................................................126
2.10.6.2.A/DTest(Menucode1862).............................................................126
2.10.6.3.KeyboardTest(Menucode1863)....................................................126
2.10.6.4.ChessPrinterTest(Menucode1864)...............................................127
2.10.6.5.PrinterSensorTest(Menucode1865)..............................................127
2.10.6.6.FirmwareVersion(Menucode1867)...............................................128
2.10.6.7Communication(Menucode1868)..................................................128
2.10.7. ScaleParameter(Menucode1870).......................................................129
2.10.7.1BackuptoUSBMemory(Menucode1877).....................................131
2.10.7.2RestorefromUSBMemory(Menucode1878).................................131
2.10.8. FunctionKeyDefine(Menucode1880)...............................................132
2.10.8.1 FunctionKeyDefine(Menucode1881)...........................................132
2.10.8.2Function KeyBlock(Menucode1882)............................................135
2.11. Report........................................................................................................136
2.11.1.Introduction.........................................................................................136
2.11.2.ReportMenu(Menucode1600)...........................................................136
2.11.3.X1Report (Menucode1610/1630).......................................................136
2.11.4.X1ScaleSalesReport(Menucode1611/1613).....................................137
2.11.5.X1 PLUReport(Menucode1612/1632)...............................................139
2.11.6.X1MiscellaneousPLUReport(Menucode1613/1633) ........................142
2.11.7.X1 GroupReport(Menucode1614/1644)............................................144
2.11.8.X1 Department SalesReport(Menucode1615/1635)............................146
2.11.9.X1HourlySalesReport(Menucode1616/1636)...................................148
2.11.10.X1Clerk SalesReport(Menucode1617/1637)...................................150
2.11.11.Z1Report(Menucode1620/1640).....................................................152
2.11.12.ClearAllReport(Menucode1650).....................................................153
3. SALES OPERATION.................................................................................................154
3.1. BasicOperation..........................................................................................154
3.2. Zero.............................................................................................................154
3.3. Tare..............................................................................................................155
3.3.1ManualTareEntry1...............................................................................155
3.3.2WeighedTareEntry................................................................................155
3.3.3HowtoClearTare..................................................................................156
3.3.4PresetTare.............................................................................................156
3.3.5SuccessiveTare......................................................................................157
3.4. CallingUpaPLU........................................................................................158
3.4.1UsingNumericKey................................................................................158

7
3.4.2UsingSpeed Key................................................................................... 158
3.5. Override(FOR key)...................................................................................159
3.5.1By-WeightPLU.....................................................................................159
3.5.2By-CountPLU......................................................................................160
3.5.3By-PCSPLU.........................................................................................161
3.6. SalesOperation..........................................................................................162
3.6.1WeighedItemOperation......................................................................... 162
3.6.2ByCountItem.......................................................................................163
3.6.3ByPCSItem.........................................................................................164
3.7. Discount......................................................................................................165
3.7.1UnitPriceDiscount-ByWeightPLU.....................................................165
3.7.2%UnitPriceDiscount-ByWeightPLU.................................................166
3.7.3UnitPriceDiscount-ByPCSPLU.........................................................168
3.8. Add-UpTransaction...................................................................................169
3.9. ClerkOperation..........................................................................................171
3.9.1Standard Clerk Operation....................................................................... 172
3.9.2FloatingClerkOperations.......................................................................173
3.10. Void...........................................................................................................175
3.11. Payment&Chance.................................................................................. 176
3.12. Return.......................................................................................................178
3.13. PrepackKey.............................................................................................179
3.14. XKey.......................................................................................................181
3.14.1By-WeightPLU...................................................................................181
3.14.2Non-WeighedPLU..............................................................................182
3.15. Howto ChangeSellByDate/Time........................................................ 183
3.16. HowtoChangeOrigin............................................................................184
3.17. HowtoChangePLUType......................................................................184
3.18. DirectDiscount........................................................................................185
3.18.1.FixedPriceKey..................................................................................185
3.18.2.%DiscountPriceKey.........................................................................186
3.19. PLUConnection......................................................................................187
3.19.1.ReferencedPLUFunction...................................................................187
3.19.2.CoupledPLUFunction........................................................................187
3.19.3.LinkPLU Function.............................................................................187
3.20. Sales OperationControlParameters.......................................................187
3.20.1.FixedWeight......................................................................................187
3.20.2.PrepackWithoutReport.......................................................................187
APPENDIX..........................................................................................................................188

8
1. LabelFormat..................................................................................................188
2.ASCIICodeTable.........................................................................................195
3. WindowCharacterSetInformation.............................................................196
4. ErrorMessage................................................................................................197
1.GENERAL
1.1 PRECAUTIONS

9
• CE Mark Warning

10
This is a Class Aproduct. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.

11
1.2 INTRODUCTIONS
Thank you for purchasing the CAS CL3000 series price computing electronic printing
scale. We have designed this equipment with many advanced features, high quality
construction, and user-friendly menu driven programming. We are confident that you
will find the CAS CL3000 series scale will meet all of your most demanding needs.
Remember, for proper installation and maintenance please have your Authorized CAS
Dealer do the primary installation, programming, and demonstration. Your CAS
Authorized Dealer also has a wide variety of supplies, accessories, and expansion
options for whatever your new and increasing demands may require. Authorized CAS
dealers are trained to help you with every aspect of the CL3000 series and should you
need servicing, they are expertly trained by CAS to assist you with virtually any
problem.

12
1.3 SPECIFICATIONS
Max.Capacity
3/6kg
6/15kg
15/30kg
6/15lb
15/30 lb
30/60 lb
Interval
1/2g
2/5g
5/10g
0.002lb/
0.005 lb
0.005lb/
0.01lb
0.01lb/
0.02lb
Max.Tare
-2.999kg
-5.998kg
-9.995kg
-5.998lb
-9.995lb
-29.99lb
A/DConversionRate
Approx.8 times/sec.
MeasurementType
LoadCell
PlatterSize
380x250mm
Key
StandardType (B)
72 PLUkey,
35 function
key
Pole Type (P)
72 PLUkey,
36functionkey
SpeedKey
144PLU
144PLU
Display
LCD
PresetTare:5 digit
Weight: 6digit
UnitPrice: 7digit
Total Price: 8digit
PLUname:12digit
Printer
Speed100mm/sec
Printing Resolution
202dpi
LabelSize
Width: 40mm~60mm
Length:30mm~80mm
BarcodeType
UPC,EAN13,I2OF5,CODE128
Font
Small, Middle,LargeSize, FreeFormat,Italic,Bold, Underline,
ThroughLine,Doublethroughline, Reverse,shadow, outline
PrinterType
DIRECTTHERMALPRINT
OperatingTemp.
-10°C~ 40°C(14°F ~104°F)
Power
AC 100-240V~ 50/60Hz 1.5A

13
Number
Range
Programmable Data
PLU
(PriceLook Up,
ItemIndex Number)
10000
1~999999
Ingredient 510character
1000
1~1000
UserDefinedBarcodeFormat
20
1~20
Department
99
1~99
TaxType
9
1~9
Group
99
1~99
Clerk
95
1~95
Discount
99
1~99
Origin
500
1~500
LabelFormat
30
Fixed
20
FreeFormat
BitmapImage
14
1~99
Customer
89
1~89
Symbol
8
1~8
ScrollMessage
9
1~9
X1,Z1Report
PayType
7
Sales Message
99
1~99
Nutritionfact
500
1~500
TareTable
99
1~99
Note: Specifications are subject to change without notice.
We always call PLUs instead of Item Index Numbers.

14
1.4 NAMEANDFUNCTIONS
OVERALLVIEW

15
DISPLAY
■CL3000-B
■CL3000-P

16
KEYBOARD
■CL3000-P
■CL3000-B

17
1.5 SYMBOLS
SYMBOLS
DESCRIPTION
Stableweight indicator
Zeroweight indicator
Netweightindicator
Speedkeyshift statusindicator
Discount status indicator
Autoclearingstatus and Printmode indicator
Print Mode indicator
Auto clearing status indicator
Batterystatus(level)check
USB
USBmemoryconnectioncheck
CONNECT
Networkserverconnectioncheck
LN
LANConnectionStatus
LANG
Languagechangemode indicator
TR
Data transmission status indicator

18
1.6 KEYFUNCTIONS
Functionkey
KEY
DESCRIPTION
Numerickeys. Usedtoenterpricing,qty,count, tare,etc.
Double zerokey.
Clearkey.Usedto clearerroneousentriesanderrorconditions.
Re-Zero key. Use to remove small variations in the scale’s zero.
Tarekey.Usetomanuallyenterandremovetareweights.
Overridekey. Fortemporarypricechangeentry.
Date & Time key. Toggles the display between time, date, scale number
anddepartment number.
Up arrowkey:Used togo toprevious lineinprogrammode.
MENUkey.Thiskeytogglesfromprogrammenutosalemode.
Pageupkey: Usedtogotopreviouspageinprogrammode.
Forkey.Usethiskeyforby-count orby pcs pricing:3 @3FOR
$1.00. Ittoggles betweentheQTY,PIECE, andPRICE fields.
AUTOkey.Auto-printmode
Pre-Pack key. Usedtoenter Pre-Packaging modeinwhichthescale
Auto-printsforeverytransactionandpreventstheautoclearing ofdata.
Leftarrowkey: Usedtogotoleftcharacterinprogrammode.
Savekey.Savemode preventstheauto clearing ofanycalled-updata
liketareweight,PLUpricing, etc.
Voidkey.ToremoveerroneoussalesfromADD-Up
Rightarrowkey:Usedtogotorightcharacterinprogrammode.
When youtypea PLUnumber and pressthiskey,it calls-upthatPLU.
Downarrowkey: Usedtogotonextlineinprogrammode.

19
KEY
DESCRIPTION
ADD-Up key. This key when used in conjunction with ST/TTL key allows
youprint acustomer-totallabel aswellasindividualtransactionlabels.
Pagedownkey: Usedtogotonext pageinprogrammode.
Multi-Labelkey. Usethiskeytoprintmultiple sales ofthesame
transaction.Escapekey. Itis usedtoexitinprogrammode.
Subtotal / Total key. Used with the ADD key in order to print customer
totals.
Feedkey. Usethiskeyto feedlabels orpaperthroughprinter
Paykey.Usethiskeytocalculatechange.
Testkey.Usedtoprint test pattern
Print key. Used tomanuallyprinttransactions and alsoserves as an
ENTER key in programming mode. There are 2 of them and they both
actthesame.
Return key. Used to credit sales for erroneous transactions or returned
items. Shift Key. Used to access the second level of Speed Keys inSales
Mode. Used to toggle between Upper Case and Lower Case Alpha
Characters.
MiscellaneousWeighedPLUkey.
MiscellaneousBy-CountPLUkey.

20
Programmodekey
KEY
DESCRIPTION
Alphakeys. Usedtotypetextdata.
Usedto type$
Backspacekey. Usedtobackspaceanddeletetext data.
Space bar.
Usedto goto next linetoenter text
Specialsymbolkeys.
Usedto typespecial symbol. (SeeASCII codetable)
Note: X key is only used in sale mode and ESC key is only used in program mode.
Sale mode : X key
Program mode : ESC key

21
1.7 InstallationoftheLabel Roll
• Label Specifications
Outer diameter of roll : 100mm
Inner diameter of roll : 40mm
Width of receipt roll : 40, 50, 60mm
Width of label roll : 60mm(MAX)
• Print Area
Width of label : 60mm(MAX)
Printable width : 56mm(MAX)
Length of label : 80mm(MAX)