CAS S2000JR User manual

2
e

3
CONTENTS
PRECAUTIONS...................................................4
PREFACE ............................................................6
OVERALL VIEW.................................................. 6
DISPLAY & KEYBOARD.................................... 7
OPERATIONS.................................................... 11
I. Programming Mode.................................. 11
Chapter 1. Basic Operation.........................12
Chapter 2. PLU Saving & Calling-up...........15
Chapter 3. User’s Set-up Mode ...................19
Chapter 4. Formatting Printing Receipt ......23
II. Sales Mode................................................30
Chapter 5. Sales Transaction ......................31
Chapter 6. Daily Total Sales.........................33
ASCII CODE......................................................35
ERROR MESSAGES........................................36
SERIAL INTERFACE........................................36
SPECIFICATION...............................................37

4
PRECAUTIONS

5

6
PREFACE
Thank you for the purchasing CAS S2000 Jr.
This series have been designed with CAS reliability, under rigid quality control and
with outstanding performance. Your specialty departments can enjoy with CAS
product. We hope that CAS product meets your needs.
The user manual is designed to guide you to understand product operation and
proper care of product.
OVERALL VIEW
■S2000 Jr.
■S2000 Jr - M

7
DISPLAY & KEYBOARD
■S2000 Jr. LCD TYPE : Front Display
■S2000 Jr. LCD TYPE : Rear Display
■S2000 Jr. VFD TYPE : Front Display
■S2000 Jr. VFD TYPE : Rear Display

8
■ S2000 Jr. – M LCD TYPE : Front Display
Table : Symbols on Display
SYMBOLS DESCRIPTION
To adjust zero
Tare on
Low battery warning
Back light on
Charge status

9
■ KEYBOARD
■ ER PLUS – M Direct PLU Key pad

10
Table: Key Functions
KEYS
FUNCTIONS
To input all of numerical data
Direct PLU keys
To save PLU
To call up PLU
Used to prevent the auto clearing of uni t price and weight both
To clear data
To set zero
To set or clear tare value
To turn on & off the scale
Used to convert a unit price to a half pound
Used to convert a unit price to a quarter pound
Used to print out a label
Direct PLU key (ER PLUS-M)

11
OPERATIONS
I. Programming Mode
Chapter 1. Basic Operation
a. Turning the scale on / off
b. Turning backlight on / off(Option in LCD version only)
c. Zero function
d. Tare function
– One Time tare
– Successive tare
– Preset tare
Chapter 2. PLU Saving & Calling-up
a. Saving unit price on PLU
b. Saving tare weight on PLU
c. Saving valid date set on PLU(Option)
d. Saving PLU item code
e. Saving PLU name
f. Calling up PLU
- Indirect PLU
- Direct PLU
Chapter 3. User’s Set-up Mode
a. Auto power-off
b. LCD backlight ON/OFF function (Option in LCD version only)
c. Brightness control (Option in LCD version only)
d. Low battery backlight auto off function(Option in LCD version only)
e. Suspend Mode Function (Only LED version)
f. Selecting the printer
Chapter 4. Formatting Printing Receipt
a. Setting the Printer
b. Receipt header setting
c. Receipt currency (unit) setting
d. Receipt DATE setting
e. Receipt TIME setting

12
f. Receipt Date format setting
g. Samples of Print format

13
Chapter 1. Basic Operation
a. Turning the scale on / off
①Press ON/OFF keytoturn on.
②Press ON/OFF key to turn off(LED, VFD
Version).
Press ON/OFF key for a few sconds to turn
OFF(LCD Version)
b. Turning backlight on/off(Option in LCD version only)
①Press ON/OFF keytoturn on.
②Press
ON/OFF keyagainunder the backlight
on.
c. Zero function

14
①Press ZERO key to set zero point.

15
d.Tare function
Tare means the weight ofcontainer. You may usetare function when you weigh an item
with container andmeasure only the weight ofitem.
■ One time tare
①Placea container on the platter.
Ex) 200g of tare.
②Press TARE key toset zeropoint.
EX) 200gof tare.
■ Successive tare
①Placeanothercontainer ontheplatter.
Ex) 100g of tare
②Press TARE key toset zeropoint

16
③After weighing item remove all ofthe
container from the platter. ④Press TARE key again to set zero.

17
■ Preset tare
①Pressappropriate numeric keys.
Ex)10g ②Press TARE keytoset tare.
③Press TARE key again to set zero.

18
Chapter 2. PLU Saving & PLU Calling-up
a. Saving unit price on PLU
This section explains how to save unit price in PLU.
Number of PLU Range Remarks
PLU Name
200
1~200
①Press numeric key to input unit price you wish
to have.Ex)1.99
②Press MW key.
③
Pressnumerickeytoinput a PLU address.
Ex) PLU 10.
④Press MW keytosave it.
b. Saving tare weight on PLU
①
Press numeric key to input tare weight you
wish to have. And then press MW key to save it..
②
Press MW key.

19
Ex) 0.100

20
c. Saving valid date set on PLU
This section explains how to save valid date in PLU.
You can input the valid date. Range is 0 ~ 999.
Valid date
Packed on date
Sell by date
Remarks
0
07.12.11 (Today)
(No print)
1
07.12.11 (Today)
07.12.11(Today)
2
07.12.11(Today)
07.12.12(Tomorrow)
999
07.12.11(Today)
10.09.03(After 998 days)
①
Pressnumerickeytoinput a vaild date
Ex) Sellby 9 days after
②
Press MW keyto save it.
d. Saving PLU item code
This section explains how to save valid date in PLU.
①
Pressnumerickeytoinput a item code
Ex) Itemcode number“10”
②Press MW keytosave it.

21
e. Saving PLU name
●Ckey is to input, save a character, and move to next character (or byte).
●TARE key is to move next programming menu.
①
Input appropriate ASCII codes to save the PLU
name. ※
Please refer to the ASCII table on page
45.
Ex)“APPLE”is “4,1, C,5,0,C,5,0,C,
4, C(alphabet), C, 4,5, C”
②Press TARE key to exittonormal
weighingmode or Ckey up tomaximum
16th byte. Then automatically exit to normal
weighingmode.
■ Please refer to “Alphabetic key location”.