CAS PR2-15 User manual

1

2
PRECAUTIONS 3
PREFACE, OVERALL VIEW 5
DISPLAY & KEY BOARD 6
COLUMN INSTALLATION 8
OPERATION 9
Chapter 1. Basic Operation 9
Chapter 2. PLU Saving & Calling-up 12
Chapter 3. User' s Set-up Mode 13
Chapter 4. Sales transaction 13
Chapter 5. Payment 16
Chapter 6. Interface in Detail 18
BATTERY MAINTENANCE 21
ERROR MESSAGE 21
SPECIFICATIONS 22

3

4

5
Thank you for purchasing CAS PRΙΙ series.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PRΙΙ.
Please keep it handy for future reference.

6
PR II - B Front display
PR II - B Rear display
PR II - P Front cover & key

7
KEY FUNCTIONS
KEYS FUNCTIONS
~ Used to enter all the numeric data
~ PLU key.
Function key(Back-light, Power Save
Used to enter PLU setting
Used to clear all the numeric price display
Used to clear sum total price
Used to clear all the daily total prices
Used to correct the zero point
To set or clear tare value
PLU save key.
To make several sales transaction by adding up.
To check total sales amount or finalize sales transaction.
Used to enter the decimal point when price is entered.
+ Used to change back-light setting.(OFF, ON, AUTO)
+ Power Save Mode
+ Used to price per 100g ($/100g)

8

9
● Turn on the ON/OFF switch. Then, the display will show all the segments and
count up "9" to "0".
Chapter 1. Basic Operation
a. Zero function
① Press ZERO key to set Zero.
b. Tare function
Tare means the weight of container. You may use tare function when you weigh an item
with container and measure only the weight of item.
● One time tare
①Place a container on the platter.
EX) 200g of tare.
Press TARE key to set zero point.②
EX) 200g of tare.

10
● Successive tare
③ Place another container on the platter.
EX) 100g of tare.
④ Press TARE key to set zero point.
⑤ After weighing item remove all of the
container from the platter.
⑥ Press TARE key again to set zero.
● NOTICE： To remove TARE funtion press “TARE” Key again after removing the
container from the paltter. Automatic tare clearing function may not be applied to all of PR
series.