CAS TP-15 User manual

Price Computing Scale
OWNER’S MANUAL
TP - Series

CONTENTS
PRECAUTIONS 4
PREFACE 6
NAMES AND FUNCTIONS 6
INSTALLATIONS 8
OPERATIONS 9
1. General Weighing 9
2. Weighing with Tare 10
3. Saving a PLU to Memory 11
4. How to Call up a PLU 13
5. Add up the Price 15
6. Add up Fixed Price Commodities 16
7. Multiplication Function 17
8. How to Display the Added Total Price 18
9. Change Calculation 19
10. Daily Total Price 20
11. How to Call the Daily Total Price 21
12. Auto-Power Off 22
13. How to Set the Back Light Function 23
14. Tare Option 24
15. Printing 24
16. How to Charge the Battery 29
ERROR MESSAGE 30
SPECIFICATIONS 31

4
PRECAUTIONS
Do not subject the scale to sudden
temperature changes.
Place the scale on a flat and stable
surface.
Do not subject the platter to sudden
shocks. This scale must be installed in a dry and liquid free environment.
Make sure that you plug your scale into the proper power outlet.
Plug into a power outlet 30 minutes before operations.

5
Keep the scale away from strong EMI noises may cause incorrect weight
readings.
If the scale is not properly
leveled, please adjust the
4 legs at the bottom of the
scale(turn legs clockwise or
counterclockwise) so as to
center the bubble of the
leveling gauge inside the
indicated circle.
Leveling
gauge

6
PREFACE
NAMES AND FUNCTIONS
Thank you for purchasing our CAS TP-II.
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your specialty departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the TP-II.
Please keep it handy for future reference.
OVERALL VIEW
PLATTER
DISPLAY
LEVELING
GAUGE
ADJUSTING
BOLT KEYBOARD

7
7890
45600
123C
ON
OFF
MODE TTP
CALL
ZERO TARE
PAY
MW
MR
EL
DISPLAY & KEYBOARD
FUNCTIONS
Used to enter all the numerical data.
Used to enter a double zero.
Used to clear erroneous entries and error conditions.
Used to display the daily total price.
Used to call the added total price.
Used to calculate a change.
Used to call up a indirect PLU.
Used to store a PLU to the memory.
Used to add up the price.
Used to cancel the price in the added total price.
KEYS DESCRIPTIONS

8
Multiplication key.
Used to correct the zero point.
Used to enter a tare weight.
Used to delete a tare weight.
No function key. (option: PRINT key)
Turns on and off the power.
Used to turn on/off the back light.
KEYS DESCRIPTIONS
INSTALLATIONS
Insert the post pipe into a post bracket as Fig. 1.
Insert and fasten the display assembly screws as Fig. 2.
Fig. 1 Fig. 2
BOLT
POST
PIPE POST
BRACKET

9
OPERATIONS
Turn on the display by pressing the ON/OFF key.
When you turn on the display, the display will show all the segments and
count up “0” to “9”. (If you want to stop it, press any key.)
When you turn on the display, make sure that platter is empty.
Otherwise, display will show the “OFL”. (Refer to ERROR MESSAGE)
When you need to zero adjustment, press the ZERO key. Then the display will
show “0.000”. Make sure that the ZERO lamp is on.
1. General Weighing
1 00 0
Place the commodity on the platter.
Enter a unit price, then you will see the total price.

10
TARE
1 00 0
Place the container on the platter.
2. Weighing with Tare
Tare is the weight of container being used for a commodity.
The TARE key subtracts the weight of the container.
Press the TARE key. Make sure that ZERO and TARE lamps
should be on.
Place a commodity in the container, then the display will
show net weight of the commodity.
Enter a unit price, then you will see the total price.

11
TARE
Remove the container and the commodity, then the display
will show the weight of container with “ - ”.
Press the TARE key.
3. Saving a PLU to Memory
This function stores each PLU into a internal back up memory.
PLU means Price Look Up which has a unit price.
Direct PLU
1 00 00
MW
Enter a unit price by pressing the numeric keys.
Press the MW key.

12
5 00
MW
1 00 0
MW
If you use tare for this PLU, enter the weight of container
and press the MW key. (500g)
If you don't use tare for this PLU, just press the MW key.
Note: While saving a PLU, you have the option of programming tare.
(Refer to 14. Tare option.)
Press one of the direct PLU keys, then this price will
be stored.
Indirect PLU
There are 200 indirect PLUs from 1 to 200.
Enter a unit price by pressing the numeric keys.
Press the MW key.

13
5 00
MW
1 00
MW
If you use tare for this PLU, enter the weight of container
and press the MW key. (500g)
If you don't use tare for this PLU, just press the MW key.
Note: While saving a PLU, you have the option of programming tare.
(Refer to 14. Tare option.)
Enter the address of this PLU and press the MW key.
(Address: 100)
4. How to Call up a PLU
Direct PLU
Press one of the direct PLU keys that you wish to call,
then the display will show the unit price.

14
1 00
MR
Place a commodity with container, then you will see
the total price.
You will see the tare and the unit price.
Note: Before you call up a PLU, you should save it to the memory.
Indirect PLU
Enter the address of a PLU and press the MR key.
(Address: 100)
Place a commodity with container, then you will see
the total price.

15
If you want to cancel the last transaction you just entered, press the - key.
Now, you can go to normal mode automatically.
1 00 0
Place the commodity on the platter.
5. Add up the Price
When you need to weigh a commodity, you can use this method.
Enter a unit price or call up a PLU, then you will see
the total price.
After you hear a beep sound, press the + key.

16
2 00
Remove the commodity from the platter, then you can go to
normal mode.
If you have other items to add up, go to step and then
follow these steps again.
Note: This function could be continued either up to 99 transactions or the total price
reaches up to 99999999.
6. Add up Fixed Price Commodities
When you don’t have to weigh a commodity, you can use this method.
Enter a unit price by pressing numeric keys or call up
a PLU.
Press the + key.
If you want to cancel the last transaction you just entered, press the - key.
Now, you can go to normal mode automatically.
If you have other items to add up, go to step , and follow these steps again.

17
Note: You can enter the number of commodities up to 99.
7. Multiplication Function
Make sure that display should be zero.
If you want to cancel the last transaction, press the
- key.
Now, you can go to normal mode automatically.
2 00
1 0
Enter the number of items by pressing numeric keys,
then you will see the price.
(EXAMPLE : 10 pieces, Unit Price : 2.00)
Press the + key.
Enter a unit price by pressing numeric keys or call up
a PLU.
Press the key.

18
TTP
CALL
TTP
CALL
TTP
CALL
Press the + key again, then you can go to normal mode
automatically.
8. How to Display the Added Total Price
To confirm the added total price
To clear added total price
Press the TTP CALL key.
Press the TTP CALL key.
Press the TTP CALL key again, then you can go to normal
mode automatically.

19
9. Change Calculation
Press the TTP CALL key, then you will see the added
total price.
C
TTP
CALL
PAY
1 00 0
PAY
Press the C key.
Press the PAY key.
Enter the customer's payment.
Press the PAY key, then you will see the change.

20
PAY
1 00 0
Press the PAY key, then the added total price will be
cleared.
Note: A customer's payment should be always bigger than the total price.
Otherwise, you will see the error message and error beep sound may be
generated. (Refer to ERROR MESSAGE)
10. Daily Total Price
Every transaction is saved for daily total price.
So you can see how much and how many commodities were sold.
How to Cancel the Last Transaction in the Daily Total Price
Place the commodity on the platter.
Enter the unit price by pressing numeric keys or call up
a PLU, then you will see the total price.
After the sound of buzzer, this transaction will be saved for
daily total price.
If you want to cancel the last transaction in the daily
total price, press the
- key.

21
11. How to Call the Daily Total Price
To confirm the daily total price.
Make sure that platter is empty.
To clear the daily total price.
Make sure that the display should be zero.
MODE
MODE
MODE
Remove the commodity from the platter then you can go to
normal mode.
Press the MODE key.
(For example, the number of transactions : 253 times,
daily total price : 12,357,600.00$)
Press the MODE key.
(For example, the number of transactions : 253 times,
daily total price : 12,357,600.00$)
Press the MODE key, then you can go to normal mode.