Cashmaster Omega 230 User manual

Contrast
Press and
hold the “F”
key and use
the “up” (to
increase)
and “down”
(to decrease)
the contrast.
Calculator mode
Press and hold the
“F” key and press
the ‘Enter’ key.
This will activate
calculator mode.
Use this function
for adding/subtract-
ing/multipling/
dividing.
1. Place the Cashmaster on a rm even surface, ensure the tray is empty, press ON/OFF.
2. Using the keypad: - Enter (1) Register, (2) Pulls, or (3) Count
- Enter Register number (If prompted to do so)
(Follow on-screen promts)
21
.0
3
456
7 8 9
Auto add
Press and hold
the ‘F’ key and
press the ‘PLUS
(+)’ key. This will
toggle Auto Add
state. “ + ” will be
displayed on the
screen when Auto
Add is on.
Bank On/Off
Press and hold
down the ‘F’
key and press
the “Coin UP”
key.
This will allow
your bank to
be activated or
deactivated.
Calibrate
Scoop
Press and
hold down
the “F” key
and press the
‘ON/OFF’ key
and follow
the onscreen
instructions.
Set time/date
Press and hold the ‘F’
key and press the ‘Coin
DOWN’ key. This will
enter the Time/Date
setting. Use the coin
up/down keys to toggle
and use the “PLUS (+)”
and “MINUS (-)” keys to
increase and decrease.
Auto Scroll
Press and hold the
“F” key and press
the “MINUS (-)”
key. This will toggle
AutoScroll state.“ ”
will be displayed on
the screen when
AutoScroll is on.
Bank Setting
Press and hold
down the ‘F’
key and press
the “Bill UP”
key.
This will allow
you to set the
bank amount.
Grams mode
Press both the
“Rolled Coins”
and “Strapped
Bills” key simul-
taneously.
Use this function
to weigh objects
(max 1.5kg).
View Till
Press and
hold the “F”
key and press
the “Till”
key. This will
display infor-
mation for the
current till.
NON CASH - Use for manual entry of non cash
items such as Maestro, Visa
STRAPPED BILLS - Press
to select strapped bills
UP and DOWN - Used to select required
bill/coin denominations
C(CLEAR) - Press and hold
press again to clear the total
PLUS and MINUS - Used to add and subtract
amounts to/from the total
PRINT - Press once for a
print out of the totals
ROLLED COINS - Press to select rolled/loose coins
TILL - Press to save the current till and start a
new one
NUMBERS - Use these for completing manual entries
CE (CLEAR ENTRY) - Press once to clear sub totals
FUNCTION - Used to control access various
functions
ENTER - Use this for completing manual entries
DECIMAL - Only supported in calculator mode
ON/OFF - Press to switch machine on/off.
Fast Key Functions
Getting Started
TRAY
Keypad Layout
Screen Layout
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / bank indicator
Auto Add
Date
Time
Scoop / No. of pieces
Sub total
Running total
Total
GBP
Coins
1p
0.00
0.40
x40
15.12.2008 11.53
Total
Scoop
USD
Coins
1c
0
0
19.01.2009 10.15
Cashmaster Omega 230
Quick Start Guide

Ensure that the display indicates Rolled Coins counting mode.
Press the Rolled Coins key to select Rolled Coins counting mode.
1. Place a roll of coins on the tray.
2a. If the roll is “full” the Cashmaster will display the value. Go to step 3.
2b. If there is “crossover” or the roll is not “full”. You must then select the denomination of coin
using the coin . Press the enter key to conrm. Go to step 3.
3a. If auto-add is on and the roll is “full” the cashmaster will automatically add to total.
3b. If auto-add is on, and the roll is not full, press key to accept and add total.
3c. If auto-add is off, press the key to accept the value and add the grand total.
Advance to the next denomination.
2c. If the roll is not “full” you must select the denomination using the coin keys.
Press the enter key to conrm. Go to step 3.
Ensure that the display indicates strapped bill mode.
Press the strapped bill key to select strapped bill counting mode and to select bundles/clips.
1. Use bill key to select the required denomination, place the strapped bills on the
tray. If the strapped bills are “good” then the value is displayed.
2a. If auto-add is on and the strapped bills are “good” the value will automatically add to total.
2b. If auto-add is off and the strapped bills are “good”, press key to accept and add to totals.
2c. If the strapped bills appears as “suspect”, open the strapped bills and count in loose bill mode.
Advance to the next denomination.
Ensure that the display indicates bill counting mode.
Press the bill key to select bill counting mode and required the denomination.
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray, and advance to the next denomination.
2b. If auto-add is off, press key to add to total, and advance to the next denomination.
Ensure that the display indicates non cash mode mode.
Press the non cash key to select non cash and the item required.
1. Use the numeric keypad to enter the values.
2. If the value is correct, press the key to add to totals.
Advance to the next denomination.
Ensure that the display indicates coin counting mode.
Press the coin key to select coin counting mode and required the denomination.
1. Place all coins of your selected denomination in the sccop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the key to add to total, and advance to the next denomination.
Loose Bills
Loose Coins
Rolled Coins
Strapped Bills
Non Cash Items
Press to
select
Rolled
coin
mode
Press to
select
Strapped
bill mode
Press to
select
non cash
items
mode
www.cashmaster.com
Customer Support (Toll Free): 1 - 877 - CASHMAS
10239A