Cashmaster Sigma 170 User manual

Contrast
Press and
hold the “F”
and “C” keys,
and press
the “Up” (to
increase) and
“Down” (to
decrease) the
contrast.
Auto Add
Press and hold the
“F” key and press
the “PLUS (+)” key.
This will toggle Auto
Add state. “ + ” will
be displayed on the
screen when Auto
Add is enabled.
Set Time/Date
Press and hold the “F”
key and press the “Coin
Down” key. This will enter
the Time/Date setting. Use
the coin up/down keys to
toggle and use the “PLUS
(+)” and “MINUS (-)” keys
to increase and decrease.
To exit, press the “F” key.
STRAPPED BILLS
Press to select strapped bills
UP and DOWN
Used to select required bill/coin denominations
C(CLEAR)
Press and hold press again to clear the total
PLUS and MINUS
Used to add/subtract amounts to & from the total
ROLLED COINS
Press to select rolled/loose coins
CE (CLEAR ENTRY)
Press once to clear sub totals
FUNCTION
Used to control access various functions
ON/OFF
Press to switch machine on/off
PRINT
Press once for a print out of the totals
Fast Key Functions
TRAY
Keypad Layout
Screen Layout
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / Bank indicator
Auto Add
Date
Time
Scoop / No. of pieces
Sub total
Running total
Total
GBP
Coins
1p
0.00
0.40
x40
15.12.2008 11.53
Total
Scoop
USD
Coins
1c
0
0
19.01.2009 10.15
Switch Currency
Press and hold the
“F” key and press
the “Rolled Coins”
key. This will toggle
between the different
currencies set on
your Cashmaster.
Auto Scroll
Press and hold the
“F” key and press
the “MINUS (-)” key.
This will toggle Auto
Scroll state.“ ” will
be displayed on
the screen when
AutoScroll is on.
Bank Setting
Press and hold
the “F” key and
press the “Bill
Up” key.
This will allow you
to set the bank
amount. To exit,
press the
“Strapped Bills”
key.
Grams Mode
Press both the
“Rolled Coins”
and “Strapped
Bills” keys
simultaneously.
Use this function
to weigh objects
(max 1.5kg). To
exit, repeat as
above.
Bank On/Off
Press and hold
the “F” key and
press the “Coin
Up” key.
This will allow
your bank to
be activated or
deactivated.
Calibrate
Scoop
Press and hold
the “F” key and
press the
“ON/OFF” key
and follow the
on screen
instructions.
Cashmaster Sigma 170
Quick Start Guide
sigma
170
1. Place the Cashmaster on a rm even surface.
2. Insert tray pushing down very rmly until it clicks. Plug in the AC adapter (Charging takes approx 3 hours).
3. Ensure the tray is empty then press key.
3. Place empty coin scoop on scale (Coin scoop should not be placed on the device before turning on).
4. You are now in count mode.
Getting Started

Ensure that the display indicates strapped bill mode.
Press the strapped bill key to select strapped bills counting mode and to select bundles or clips.
1. Use bill or key to select the required denomination, place the strapped bills on the
tray. If the strapped bills are “good” then the value is displayed.
2a. If auto-add is on and the strapped bills are “good” the value will automatically be added to the total.
2b. If auto-add is off and the strapped bills are “good”, press key to accept and add to the total.
2c. If the strapped bills appear as “suspect”, open the strapped bills and count in Loose Bill mode.
Advance to the next denomination.
Ensure that the display indicates bill counting mode.
Press either bill or key to select bill counting mode and the required denomination.
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray, and advance to the next denomination.
2b. If auto-add is off, press key to add to the total, and advance to the next denomination.
Ensure that the display indicates coin counting mode.
Press either coin or key to select coin counting mode and the required denomination.
1. Place all coins of your selected denomination in the scoop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the key to add to the total, and advance to the next denomination.
Loose Bills
Loose Coins
Rolled Coins
Strapped Bills
Press to
select
Rolled
Coins
mode
Press to
select
Strapped
bill mode
www.cashmaster.com
Customer Support (Toll Free): 1 - 877 - CASHMAS
10245B
Ensure that the display indicates Rolled Coins counting mode.
Press the Rolled Coins key to select Rolled Coins counting mode.
1. Place a roll of coins on the tray.
2a. If the roll is “full” the Cashmaster will display the value.
2b. If auto-add is on and the roll is “full” the cashmaster will automatically add to the total.
2c. If auto-add is off, press the key to accept the value and add the total.
3. If there is “crossover” or the roll is not “full”. You must then select the denomination of coin
using the or key. Press the key to accept and add to the total.
Advance to the next denomination.