Cashmaster Sigma 105 User manual

Cashmaster Sigma 105
Quick Start Guide
COINS / BILLS - Used for selecting
coins, bills or rolls
ON/OFF - Press to Switch machine
on/off
UP and DOWN - Used to select
required denominations
CLEARING / ADDING - Used for
clearing values and addng to totals
FUNCTION - Used to access various
functions
PRINT - Press once for a print out of
the totals
Keypad
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / Bank indicator
Screen
Auto Add
Date
Time
Scoop / No. of pieces
Sub total
Running total
Tray
Switch Currency
Press and hold the
“UP” and “DOWN
keys together. This will
toggle between the
different currencies set
on your Cashmaster.
Auto add
Press and hold the
‘F’ key and press the
‘PLUS (C/+)’ key. This
will toggle Auto Add
state. “ + ” will be
displayed on the screen
when Auto Add is on.
Auto Scroll
Press and hold the
“F” key and press the
“DOWN” key. This will
toggle AutoScroll state.
An upward arrow will be
displayed on the screen
when AutoScroll is on.
Fast Key Functions
Calibrate Scoop
Press and hold
down the “F” key
and press the ‘ON/
OFF’ key and fol-
low the onscreen
instructions.
Bank On/Off
Press and hold
down the ‘F’ key and
press the “UP” key.
This will allow Bank
mode to be activat-
ed or deactivated.
Bank Setting
Press and hold down
the ‘F’ key and press
the “Coins/Bills” key.
This will allow you to
set the Bank amount.
Total
Scoop
USD
Coins
1c
0
0
19.01.2009 10.15

@
www.cashmaster.com
Customer Support (Toll Free): 1 - 877 - CASHMAS
1. Place the Cashmaster on a rm even surface, ensure the tray is empty, press key.
2. Place empty scoop on scale. If prompted to do so.
3. You are now in count mode.
Ensure that the display indicates Rolled Coins counting mode.
Press the coins/bill key to select Rolled Coins counting mode.
1. Place a roll of coins on the tray.
2a. If the roll is “full” the Cashmaster will display the value. Go to step 3
2b. If there is “crossover” or the roll is not “full”. You must then select the denomination of coin
using the . Press the key to conrm. Go to step 3.
3a. If auto-add is on and the roll is “full” the cashmaster will automatically add to total.
3b. If auto-add is on, and the roll is not full, press key to accept and add total.
3c. If auto-add is off, press the key to accept the value and add the grand total.
Advance to the next denomination.
Ensure that the display indicates bill counting mode.
Press either key to select note counting mode and required the denomination.
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray.
2b. If auto-add is off, press key to add to total, remove the bills and advance to the next
denomination.
Advance to the next denomination.
Ensure that the display indicates coin counting mode.
Press either key to select note counting mode and required the denomination.
1. Place all coins of your selected denomination in the scoop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the key to add to total, remove the scoop and advance to the
next denomination.
Loose Bills
Loose Coins
Rolled Coins
Press to
select
Rolled
coins
mode
Getting Started
10229A