Cashmaster Sigma 170 User manual

Contrast
Press and
hold the “F”
key and use
the “up” (to
increase)
and “down”
(to decrease)
the contrast.
1. Place the Cashmaster on a rm even surface, ensure the tray is empty, press key.
2. Place empty scoop on scale. If promted to do so.
3. You are now in count mode.
Auto add
Press and hold
the ‘F’ key and
press the ‘PLUS
(+)’ key. This will
toggle Auto Add
state. “ + ” will be
displayed on the
screen when Auto
Add is on.
Set time/date
Press and hold the ‘F’
key and press the ‘Coin
DOWN’ key. This will
enter the Time/Date
setting. Use the coin
up/down keys to toggle
and use the “PLUS (+)”
and “MINUS (-)” keys to
increase and decrease.
STRAPPED BILLS - Press
to select strapped bills
UP and DOWN - Used to select required
bill/coin denominations
C(CLEAR) - Press and hold
press again to clear the total
PLUS and MINUS - Used to add and subtract
amounts to/from the total
ROLLED COINS - Press to select rolled/loose coins
CE (CLEAR ENTRY) - Press once to clear sub totals
FUNCTION - Used to control access various
functions
ON/OFF - Press to switch machine on/off.
PRINT - Press once for a
print out of the totals
Fast Key Functions
Getting Started
TRAY
Keypad Layout
Screen Layout
Auto Scroll
Battery in use
Denomination
Coins / Bills
Selected currency
Total / Bank indicator
Auto Add
Date
Time
Scoop / No. of pieces
Sub total
Running total
Total
GBP
Coins
1p
0.00
0.40
x40
15.12.2008 11.53
Total
Scoop
USD
Coins
1c
0
0
19.01.2009 10.15
Switch Currency
Press and hold the
“F” and press the
“Rolled Coins. This
will toggle between
the different
currencies set on
your Cashmaster.
Auto Scroll
Press and hold the
“F” key and press
the “MINUS (-)”
key. This will toggle
AutoScroll state.“ ”
will be displayed on
the screen when
AutoScroll is on.
Bank Setting
Press and hold
down the ‘F’
key and press
the “Bill UP”
key.
This will allow
you to set the
bank amount.
Grams mode
Press both
the “Rolled
Coins” key and
“Strapped Bills”
simultaneously.
Use this function
to weigh objects
(max 1.5kg).
Bank On/Off
Press and hold
down the ‘F’
key and press
the “Coin UP”
key.
This will allow
your bank to
be activated or
deactivated.
Calibrate
Scoop
Press and
hold down
the “F” key
and press the
‘ON/OFF’ key
and follow
the onscreen
instructions.
Cashmaster Sigma 170
Quick Start Guide
sigma
170

Ensure that the display indicates Rolled Coins counting mode.
Press the Rolled Coins key to select Rolled Coins counting mode.
1. Place a roll of coins on the tray.
2a. If the roll is “full” the Cashmaster will display the value. Go to step 3
2b. If there is “crossover” or the roll is not “full”. You must then select the denomination of coin
using the coin . Press the enter key to conrm. Go to step 3.
3a. If auto-add is on and the roll is “full” the cashmaster will automatically add to total.
3b. If auto-add is on, and the roll is not full, press key to accept and add total.
3c. If auto-add is off, press the key to accept the value and add the grand total.
Advance to the next denomination.
2c. If the roll is not “full” you must select the denomination using the coin keys.
Press the enter key to conrm. Go to step 3.
Ensure that the display indicates strapped bill mode
Press the strapped bill key to select strapped bills counting mode and to select bundle/clipped.
1. Use bill key to select the required denomination, place the strapped bills on the
tray. If the strapped bills are “good” then the value is displayed.
2a. If auto-add is on and the strapped bills are “good” the value will automatically add to total.
2b. If auto-add is off and the strapped bills are “good”, press key to accept and add to totals.
2c. If the strapped bills appears as “suspect”, open the strapped bills and count in loose bill mode.
Advance to the next denomination.
Ensure that the display indicates bill counting mode
Press either bill key to select bill counting mode and required the denomination.
1. Place bills of the selected denomination on the tray (up to 30 at one time). Repeat until all
bills in denomination are on the tray.
2a. If auto-add is on, remove bills from the tray, and advance to the next denomination.
2b. If auto-add is off, press key to add to total, and advance to the next denomination.
Ensure that the display indicates coin counting mode.
Press either coin key to select coin counting mode and required the denomination.
1. Place all coins of your selected denomination in the sccop and onto the tray.
2a. If auto-add is on, remove the scoop from the tray, and advance to the next denomination.
2b. If auto-add is off, press the key to add to total, and advance to the next denomination.
Loose Bills
Loose Coins
Rolled Coins
Strapped Bills
Press to
select
Rolled
coins
mode
Press to
select
Strapped
bill mode
www.cashmaster.com
Customer Support (Toll Free): 1 - 877 - CASHMAS
10245A