CATSKILL 1447-1446 User manual

CRAFTSMEN, INC.
Assembly Instructions
Model 1447-1446
Model 1447-1446
This unit is made of solid North American hardwood and has a factory
applied oil finish. See the enclosed booklet for care instructions.

P/N: TT1447/1446
(1) Table Top 58” x 28” x 1-3/4”
Model 1447/1446 Parts List
P/N: Side1447
(2) Side 34” x 18” x 1”
P/N: Side1446
(2) Side 28” x 18” x 1”
Included with Model 1446
30” Height Table Only
P/N: TTS1447/1446
(2) Table Top Stick 15” x 3/4” x 3/4”
P/N: UFBB1447/1446
(2) Upper Front & Back Braces 39-1/2” x 5” x 3/4”
P/N: LCB1447/1446
(1) Lower Center Brace 39-1/2” x 3” x 3/4”
P/N: SKRU 1-1/4 (10)
1-1/4” #8 FLAT HEAD SCREW
P/N: SKRU 2 HEX (12)
2” HEX SCREW
P/N: WOOD PLUG (12)
5/8” WOOD PLUG
P/N: PIN LEVELER (4)
PIN LEVELER FOOT
P/N: HEX WRENCH1447/1446 (1)
HEX WRENCH
2

1Assembly is easiest if you invert the Harvest table. Utilizing the 2” Hex
screws, attach the Upper Front & Back Braces to each side. Then attach
the Lower Center Brace, also using the 2” Hex screws. Make sure the
counter sunk side of the holes are facing out on both sides, as wooden
plugs will be tapped into place in a later step.
Counter sunk side of holes must
point outward on both sides to
allow for wooden plugs.
Model 1447/1446 Assembly Instructions
To make the assembly of your new Catskill Craftsmen unit go as smoothly as possible, lay
out all of the components prior to beginning assembly. Make sure you have all the pieces
necessary, if there are any missing or damaged parts, call us at 607-652-7321 for
replacements. Read instructions thoroughly before beginning assembly to make sure you
have a full comprehension of how to proceed from step to step.
3

2Using the 1-1/4” #8 Flat Head screws, attach the Table Top Sticks. Make
sure the sticks are positioned such that sticks have counter sunk holes
facing each other.
3Using the 1-1/4” #8 Flat Head screws, attach the Table Top to the base.
4

4Using a hammer, tap the
Leveler feet into the bottom of
each side as shown in diagram
4-1, approximately one inch
away from each end.
Diagram 4-1
5Using a hammer and a
buffer (like another
block of wood, an old
book or some other
hard item that will not
scratch into the wood
when hammered) tap
the wooden plugs into
place to cover the hex
screw holes.
BUTCHER BLOCK OIL COUPON
For continued beauty and long life of your
Catskill Craftsmen cart, we recommend
Catskill Craftsmen’s Butcher Block Oil.
If you would like to purchase Butcher Block
Oil direct from Catskill Craftsmen’s factory, we
offer a reduced price. For one eight ounce (8
fl. oz.) bottle, which is sufficient for two
applications, simply send $6.95 along with the
completed coupon to the address below. If you
wish to use MasterCard or Visa please visit
our website www.catskillcraftsmen.com.
REDUCED
PRICE TO OUR
CUSTOMERS!
CRAFTSMEN, INC.
NAME _____________________________________
ADDRESS __________________________________
__________________________________________
CITY ______________________________________
STATE _________________________ ZIP _______
Catskill Craftsmen, Inc.
15 West End Ave.
Stamford, NY 12167-1296
CRAFTSMEN, INC.
Please send me _____# of bottle(s) of the
Catskill Craftsmen Butcher Block Oil for
$6.95. My Check or Money Order is enclosed
for a total of $______________.
Item Code: 1447-1446
5
6Carefully right the harvest table and move into your
desired location. Note that you should regularly oil
both the butcher block surface as well as the base
to increase longevity of the unit.
Please make checks payable to: Catskill Craftsmen Inc.
15 West End Ave. Stamford, NY 12167-1296