cecotec ENERGYSILENCE 3000 DESKTOWER User manual

Instruction manual
ENERGYSILENCE 3000 DESKTOWER CONTROL
Desktop fan

INDEX
1. Parts and components
2. Before use
3. Operation
4. Cleaning and maintenance
5. Technical specifications
6. Disposal of old electrical appliances
7. Technical support and warranty

SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
Never insert fingers, pencils or other objects through the grill
when the appliance is running.
Make sure the appliance is placed on a flat and stable surface
during operation.
Do not use the device next to windows, rain could cause
electrical shocks.
Never leave the appliance running unattended, constant
supervision is required.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug or switching on the appliance.
Do not immerse the appliance in water. Do not reach into the
water!
Check the power cord regularlyforvisible damage. If the cord is
damaged, it must be replaced by the official Technical Support
Service of Cecotec in order to avoid any type of danger.
Do not move the product or pull from it from its cord. Do not
use the cable as handle. Do not use the cable as handle. Do
not push the cord against corners or sharp edges. Do not pass
the product over the power cord. Keep the cord away from hot
surfaces.
Do not use the appliance if its cord, plug, orhousing is damaged,
nor after it malfunctions or has been dropped or damaged in
any way.
Do not use the appliance in confined spaces with explosive or
flammable vapours.
Keep the fan away from the heat sources.
Keep hair, clothes, fingers and other body parts away from
openings and moving parts of the product.
Never leave the appliance unattended while in use. Unplug
the device after use and when you leave the room where it is
installed.
Do not try to disassemble or repair the product by yourself.
Contact the official Technical Support Service of Cecotec.
Always turn off and unplug the appliance when not in use and
before assembling, disassembling or moving it. To avoid tipping
over, wind the cord safely.
To ensure the correct operating of the device, cleaning and
maintenance tasks must be carried out according to this
instruction manual. Turn off and unplug the appliance before
cleaning it.
Store the appliance and its instruction manual in a safe and dry
place when not in use.
Make sure the fan is not placed close to curtains or other
objects that could tangle.
Do not place the cable beneath the carpet or cover it, place it in
a room with no obstacles and where it cannot be tipped over.
Operate the fan in a wide area. Allow a free space of at least 20
cm from the device to the wall when it is operating in order to
ensure correct air circulation.
The appliance is not intended to be used by children under the
age of 8. It can be used by children over the age of 8, as long as
they are given continuous supervision.
This appliance can be used by children aged 8 and above, and
persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge, as long as they have

been given supervision or instruction concerning the use ofthe
appliance in a safe way and understand the hazards involved.
Do not allow children to play with the appliance. Close
supervision is necessary when the appliance is being used by
or near children.
Keep this appliance and its power cord out of reach of children
under the age of 8.
Cleaning and maintenance tasks must not be carried out by
children.

1. PARTS AND COMPONENTS
Fig. 1.
1. Control panel
2. Front air outlet
3. Power cord
Control panel
Fig. 2.
1. Timer
2. Speed
3. Oscillation mode
4. Mode
5. On/Off button
2. BEFORE USE
Take all the product components out of the box and make sure all of them are included and in
good conditions.
If any sign of visible damage is observed, contact immediately with our official Technical
Support Service.
3. OPERATION
Place the fan on a dry, level surface.
Connect the appliance to the power supply.
To turn the fan on, press the On/Off button.
Speed
Press the speed button repeatedly to set the desired speed setting: Press once to set low
speed, press twice to set medium speed and 3 times to set high speed. The LED indicator will
light up according to the speed level set.
Oscillation
Press this button to activate the oscillation mode. The corresponding LED light will remain lit
up.
Timer
Pres the timer button repeatedly to activate the timer. Select 0.5, 1, 2, 4 hrs and combine them
up to a maximum of 7.5 hrs. The corresponding LED light will remain lit up. Once the selected
time has elapsed, the device will turn automatically off.
Modes
Natural breeze
Press the mode button once for the fan to generate a natural breeze. The fan speed will vary
automatically according to the below cycles.
When the Natural breeze mode is activated from the fan or the remote control, you can select
one of the 3 levels: P3, P2 or P1:
P3 cycle: Medium-low-high-medium-low-high-off.
P2 cycle: Low-medium-low-off.
P1 cycle: Low-off.
Sleep mode
The cycles are the same as the Natural breeze mode ones, but times differ.
After setting the Sleep mode, press the SPEED button to set one of the 3 levels.
P3: It will run the first half an hour in P3 cycle, then another half an hour in P2 cycle and then it
will switch to cycle P1 until the fan turns off or until the timer elapses.
P2: It will run the first half an hour in P2 cycle and then it will switch to cycle P1 until the fan
turns off or until the timer elapses.
P1: It will run in cycle P1 until the fan turns off or until the timer elapses.
Press the mode button a third time to turn both previous modes off.
The corresponding LED light will light up while a mode is activated.
All these functions can also be activated from the remote control.
Fig. 3
1. On/Off button
2. Speed
3. Oscillation
4. Timer
5. Mode
Note: The fan will not operate when the timer is not set to any time, even if the speed settings
are configured.

4. CLEANING AND MAINTENANCE
Always unplug the product from the power supply before cleaning, assembling or repairing it.
Do not allow water to drip on or into the fan product’s housing.
It is suggested to clean the product with a mild cleaning agent and a soft and wet cloth. Do
not use abrasive products such as solvents, acidic detergents or alcohol to clean the plastic
components as these could be deformed or damaged.
Do not allow water to enter the motor or touch the cord during cleaning.
Storage
It is recommended to use the original (or appropriately sized) box to store the product.
Store the device is a safe, dry place out of the reach of children.
5. TECHNICAL SPECIFICATIONS
Product: EnergySilence 3000 DeskTower Control
Product reference: 05974
Power: 30 W
Voltage and frequency: 200-240 V, 50 Hz
Made in China | Designed in Spain
6. DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed ofwiththe normalunsorted municipalwaste. Old appliances
must be collected separately, in order to optimise the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out “wheeled bin” symbolon the product remindsyou ofyour obligationto dispose
of the appliance correctly.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.
7. TECHNICAL SUPPORT AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at [phone].

Fig./Img./Abb./Afb./ Rys./Obr. 1
2
3
1
Fig./Img./Abb./Afb./ Rys./Obr. 2
Fig./Img./Abb./Afb./ Rys./Obr. 3
3
2
41
1
2 3
4 5
5

www.cecotec.es
Grupo Cecotec Innovaciones S.L.
C/ de la Pinadeta s/n, 46930
Quart de Poblet, Valencia (Spain)
YV_01201211