Chauvet MVP Ta8 Curve User manual

User Manual

Edition Notes
ii MVP™ Ta8 Curve User Manual, Rev. 1
Edition Notes
This User Manual covers the description, safety precautions, setup, installation,
operation, and maintenance for the MVP™ Ta8 Curve video panels
offered by
CHAUVET®. This edition was published in October 2012.
Trademarks
CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the Chauvet name and
the
dotted triangle, and all other trademarks on this manual pertaining to services, products,
or marketing statements (example: It’s Green Thinking™
) are owned or licensed by
CHAUVET®. Any other
product names, logos, brands, company names, and other
trademarks featured or referred to within this document are the property of their
respective trademark holders.
Copyright Notice
CHAUVET® owns the content of this user manual in its entirety, including but not limited
to pictures, logos, trademarks, and resources.
© Copyright 2012 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Usage
CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the u
sage, copy, storage,
distribution, modification, or printing of this manual or its co
ntent for any other purpose
without its written consent.
Document Printing
For best results, print this document in color, on letter size paper (8.5 x 11 in), double
sided. If using A4 paper (210 x 297 mm), configure your printer to scale the content
accordingly.
Disclaimer
CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any error or omissions in
this document. CHAUVET® reserves the right to revise this document and to make
changes from time to time in the content hereof without obligation of CHAUVET® to
notify any person or company of such revision or changes. This does not constitute in
any way a commitment by CHAUVET® to make such changes. CHAUVET® may issue
a revision of this manual or a new edition of it to incorporate such changes.
Document Revision
The MVP™ Ta8 Curve User Manual, Rev. 1, supersedes all previous versions of this
manual. Please discard any older ver
sions of this manual you may have, whether in
printed or electronic format, and replace them with this version.
Author
Date
Editor
Date
D. Couppe
10/9/12
S. Diaz
10/15/12

Table of Contents
MVP™ Ta8 Curve User Manual, Rev. 1 -iii-
Table of Contents
Edition Notes...............................................................................................................................................................ii
Trademarks............................................................................................................................................................................ii
Copyright Notice.....................................................................................................................................................................ii
Manual Usage........................................................................................................................................................................ii
Document Printing ..................................................................................................................................................................ii
Disclaimer ..............................................................................................................................................................................ii
Document Revision.................................................................................................................................................................ii
1. Before You Begin........................................................................................................................................1
What Is Included..........................................................................................................................................................1
Unpacking Instructions ................................................................................................................................................1
Claims....................................................................................................................................................................................1
Typographic Conventions........................................................................................................................................................1
Symbols.................................................................................................................................................................................1
Safety Notes................................................................................................................................................................2
Expected LED Lifespan...............................................................................................................................................2
2. Introduction.................................................................................................................................................3
Product Description.....................................................................................................................................................3
Features......................................................................................................................................................................3
Additional Features.................................................................................................................................................................3
Additional Products.................................................................................................................................................................3
Optional Accessories ..............................................................................................................................................................3
Available Signal and Power Cables (optional)..........................................................................................................................3
Overview.....................................................................................................................................................................4
Dimensions .................................................................................................................................................................5
Pixels Per Panel..........................................................................................................................................................5
3. Setup............................................................................................................................................................6
AC Power....................................................................................................................................................................6
AC Plug..................................................................................................................................................................................6
Power Linking.........................................................................................................................................................................6
4. Mounting the MVPs.....................................................................................................................................7
Orientation...................................................................................................................................................................7
Truss Installation.........................................................................................................................................................7
Rig Kit Installation Procedure..................................................................................................................................................7
5. Joining Each MVP™ (Creating a Modular Design)....................................................................................8
Vertically Joining the Panels........................................................................................................................................8
Vertical Joining Procedure ......................................................................................................................................................8
Horizontally Joining Panels..........................................................................................................................................9
Horizontal Joining Procedure (90°)..........................................................................................................................................9
Horizontal Joining Procedure (+/- 18°).....................................................................................................................................10
6. Connecting (Cabling) Each MVP™.............................................................................................................11
Testing Signal and Power Connections........................................................................................................................11
Using the MVP™ Ta8 Curve Test Button.....................................................................................................................11
Connecting the Signal Input.........................................................................................................................................12
Connecting Power and Signal Cables..........................................................................................................................13
Connecting the Signal Between Joined Panels ........................................................................................................................13
Connecting the Power Between Joined Panels........................................................................................................................15
7. Typical MVP™ Installation..........................................................................................................................16

Table of Contents
iv- MVP™ Ta8 Curve User Manual, Rev. 1
Step 1 ....................................................................................................................................................................................16
Step 2 ....................................................................................................................................................................................16
Step 3 ....................................................................................................................................................................................16
Step 4 ....................................................................................................................................................................................16
Step 5 ....................................................................................................................................................................................16
Step 6 ....................................................................................................................................................................................16
Step 7 ....................................................................................................................................................................................16
Step 8 ....................................................................................................................................................................................16
VIP™ Sample Video Wall System Setup......................................................................................................................17
8. Operation.....................................................................................................................................................18
Additional Hardware and Software...............................................................................................................................18
About CHAUVET® LED Studio....................................................................................................................................19
Description.............................................................................................................................................................................19
9. Technical Information.................................................................................................................................20
MVP™ Ta8 Curve Maintenance...................................................................................................................................20
Troubleshooting Guide ................................................................................................................................................20
Returns .......................................................................................................................................................................21
10. Technical Specifications...........................................................................................................................22
Contact Us ..................................................................................................................................................................23

Introduction
MVP™ Ta8 Curve User Manual, Rev. 1 1
1. Before You Begin
What Is Included
•2 or 6 MVPs (Modular Video Panel) Ta8 Curve
•Neutrik® etherCON® Signal Cable per MVP™ Ta8 Curve 0.65 m/25.2 in
•Neutrik® powerCON® Power Cable per MVP™ Ta8 Curve 0.65 m/25.2 in
•2- or 6-Pack Flight Case (based on the number of MVPs included)
•Warranty Card
•User Manual
Unpacking
Instructions
Immediately upon receiving this product, carefully unpack and check the container. Make
sure you have received all the parts indicated above in good condition.
Claims
Upon receipt, if the box or contents (the product and included accessories) appear
damaged from shipping, or show signs of mishandling, notify the carrier immediately, not
CHAUVET®.
Failure to do so in a timely manner may invalidate your claim with the
carrier. In addition, keep the container and all the packing material for inspection.
For other issues such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET®
within 7 days of receiving the
merchandise.
Typographic
Conventions
Convention Meaning
1~512
A range of values in the text
50/60
A set of mutually exclusive values in the text
Italics
A reference to a section, chapter, or external document
<SET>
A button on the product’s control panel
Settings
A product function or a menu option
MENU>Settings
A sequence of menu options
1~10
A range of menu values from which to choose in a menu
Yes/No
A set of two mutually exclusive menu options in a menu
ON
A unique value to be entered or selected in a menu
Symbols
Symbol
Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may render the product
partially or completely inoperative, damage third-party
equipment, or cause harm to the user.
Important installation or configuration information. Failure to
follow these notes may prevent the product from working
properly.
Useful information.

Introduction
2- MVP™ Ta8 Curve User Manual, Rev. 1
Safety Notes
Please read the following Safety Notes carefully before working with the product. These
notes provide important safety information about installation, usage, and maintenance.
This product contains no user-serviceable parts. Any reference to servicing in this
User Manual will only apply to properly trained CHAUVET® certified technicians.
Do not open the housing or attempt any repairs.
If product is being used in a mobile or touring application, the VIP™ Media System
must be mounted in a shock resistant (or shock mount) road case. This will help
prevent damage to the hard drives.
Please refer to all applicable local codes and regulations for the proper installation
of the product.
•Always connect the product to a grounded circuit to avoid the risk of electrocution.
•The product is rated IP54 and should only be used in environments meeting that
criteria.
•When hanging the product, always secure to a fastening device using a safety cable.
•The maximum ambient temperature is 122° F (50° C). Do not operate the product at
higher temperatures.
•Do not operate the product if you see damage on the housing, LEDs, or cables. In
any of these cases, have the damaged parts replaced by an authorized technician.
•Do not open or modify the product.
•Make sure the product is connected to the proper voltage provided in this manual’s
specifications and/or the specification sticker on the product.
•Never try to repair the product. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact CHAUVET® Technical Support.
Any damages caused by manual modifications are not subject to warranty.
CHAUVET® will not accept liability for any resulting
damages caused by
unauthorized modifications or not observing the safety warnings and instructions
in the manual.
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-
LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs’ lifespan. The electrical, thermal management design of the
MVP™
Ta8 Curve panel aims to
provide the longest LED lifespan possible. Under normal
operating conditions, this lifespan can be 50,000 hours or longer. If extending this
lifespan is vital, lower the operational temperature by improving ventilation
around the
fixture and reducing the ambient temperature to an optimal operating range
. In addition,
limiting the overall projection intensity may also help to extend the LEDs’ lifespan.

Introduction
MVP™ Ta8 Curve User Manual, Rev. 1 3
2. Introduction
Product
Description
The MVP™ Ta8 Curve is a Modular Video Panel. Each video panel consists of multiple
SMD3528 tri-color LEDs.
The number in the model name indicates the pixel pitch (distance, in
millimeters, between the LEDs. When multiple panels are assembled and connected (signal
and power), the entire configuration becomes a modular video wall design.
The outer dimensions of each panel are identical. The difference between each model is the
vertical and horizontal spacing between the LEDs and the number of LED pixels. Both of
these values determine the total number of LED pixels provided on each panel. Each pixel is
one SMD3528 tri-color LED.
The aluminum alloy and stainless steel construction make the MVP™ Ta8 Curve
reliable and
solid, as well as easy to install and dismantle. Multiple panels can be assembled horizontally
or vertically, and each model is interchangeable with t
he others. This flexibility provides
numerous modular design possibilities.
The VIP™ video wall system is addressed using a PC and CHAUVET®
LED Studio software.
Refer to the CHAUVET® LED Studio User Manual for detailed information and instructions on
using CHAUVET® LED Studio.
Features
•8-mm pixel pitch panels with integrated hardware allows units be hung straight or in
convex/concave curves
•Innovative rigging hardware lets the panels curve +/-18 degrees, without losing pixel pitch
•Superb contrast through the use of blackface SMD LEDs
•Tight binning of LEDs ensures consistent color rendering across panels
•Durable and modular system for high-resolution graphics
•Easy installation and connectivity using Neutrik® powerCON® and etherCON® connectors
•Solid construction makes these a perfect product for both touring and long term installation
•Tight pixel pitch allows for equally effective close range and long range viewing
•Designed for temporary outdoors use and can be viewed during daylight operation
•Works with VIP™ Driver and VIP™ Signal Distributor
•Compatible mounting options: MVP™ Curve Rig Kits (truss mounting), or M10 bolt/clamp
(rear mounting)
Additional
Features
•Neutrik® etherCON® signal cable per MVP™ Ta8 Curve 0.4 m/15.8 in
•Neutrik® powerCON® power cable per MVP™ Ta8 Curve 0.4 m/15.8 in
Additional
Products
•VIP™ Driver (required)
Optional
Accessories
•VIP™ Signal Distributor (required when using 25 MVPs or more in your video wall)
•MVP™ Curve Rig Kit (required when you hang panels from a truss or truss structure)
Available Signal
and Power Cables
(optional)
•Signal cables (Neutrik® etherCON® Signal Extensions)
oMVPU-SIG5FT
oMVPU-SIG10FT
oMVPU-SIG25FT
•Power cables (Neutrik® powerCON® Extension)
oPCEXT5FT
oPCEXT10FT
oPCEXT25FT
oPCLEAD50FT

Introduction
4- MVP™ Ta8 Curve User Manual, Rev. 1
Overview

Introduction
MVP™ Ta8 Curve User Manual, Rev. 1 5
Dimensions
Pixels Per Panel
Each pixel is one SMD3528 LED. For detailed specifications, refer to the Technical
Specifications.
MVP™ Ta8 Curve
Pixels per Panel
72 x 72
Total Pixels
5,184
You will use the number of pixels per panel and the screen resolution you would
like to use for your video wall display to calculate the number of panels,
horizontally and vertically, supported by a single VI
P™ Driver. This Driver is
required to operate a CHAUVET® VI
P™ video wall system. Diagrams of how the
MVP™ Ta8 Curve panels and the VI
P™ Driver operate together follow later in this
manual. For details about the VI
P™ Driver and panel calculation examples, refer to
the VIP™ Driver Quick Reference Guide.

Introduction
6- MVP™ Ta8 Curve User Manual, Rev. 1
3. Setup
AC Power
Each MVP™ Ta8 Curve has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting the MVPs to the proper voltage, as specified in this
User Manual and on the product’s specification sticker.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
To determine the power requirements for each MVP™ Ta8 Curve in the series, refer to
the label affixed to the product. You can also refer to the Technical Specifications
chart
in this manual.
The listed current rating indicates the maximum current draw during normal operat
ion.
For more information, you may download Sizing Circuit Breakers from the CHAUVET
®
website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0% to 100% switch.
AC Plug
Each MVP™ Ta8 Curve comes with a power linking cord to connect power between
panels; however, the power input cord is only included with the 6-pack flight case.
This cable has a powerCON® connector to connect to the MVP™ Ta8 Curve and
an
Edison plug for power input. References to wire a new plug:
Connection
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
Power Linking
All panels in the VIP™ Series support power linking. Refer to the following table for
specifications for the MVP™ Ta8 Curve.
MVP™ Ta8 Curve
@ 120 V, 60 Hz
9
@ 208 V, 60 Hz
15
@ 230 V, 50 Hz
16
Please refer to all applicable local codes and regulations for the proper installation
of this product.

Setup
MVP™ Ta8 Curve User Manual, Rev. 1 7
4. Mounting the MVPs
Orientation
Each MVP™ Ta8 Curve is a solid frame constructed of aluminum alloy and stainless
steel. This ensures each panel is stable and easy to install. Each panel also has a
convenient pop-out handle located on the top, outside
, of the panel. This handle enables
you to easily pick up and securely hold each panel while mounting and working with the
panels.
The MVPs can be assembled to provide any number of modular designs. The panels on
the top can be securely hung
from a truss or other stable surface. Always hang in a safe
position with adequate space for ventilation, configuration, and maintenance.
CHAUVET® recommends following the general guidelines below.
•When selecting an installation location, consider ease of access for operation and
routine maintenance.
•Make sure to hang away from any flammable material, as indicated in the Safety
Notes.
•Never mount in places where rain, extreme temperature changes, or restricted
ventilation may affect the panels.
•Make sure that the structure to which you are hanging the panels can support the
weight.
Please see the Technical Specifications
section of this manual for the weight
requirement of each MVP™ Ta8 Curve.
Truss Installation
Refer to the following diagram for truss installation. CHAUVET® offers the MVP™ Ta
Rig Kits (sold separately) specifically designed for hanging the panels.
Each clamp is
designed and labeled for mounting on a specific side.
Rig Kit Installation
Procedure
Use the following instructions to join your panels to a truss using a MVP™ Ta RKR/RKL
rig kit. Each step corresponds to the number in the diagram.
1. Release quick lock lever as shown in step 1. Using the block behind the lever, push
up on the mechanism revealing the nipple.
2. Place the clamp on top of the panel aligning the slot with the loop rod and the nipple
on the top of the panel.
3. Allow looped rod to fit over rig clamp tab.
4. Push down on fast lock lever to securely lock clamp in place.
MVP™ Ta Rig Kit sold separately.
Step 1
Step 2
Step 3
Step 4

Joining Each MVP™ (Creating a Modular Design)
8- MVP™ Ta8 Curve User Manual, Rev. 1
5. Joining Each MVP™ (Creating a Modular Design)
Each MVP™ Ta8 Curve is joined together to create a modular designed video wall.
Because the panels are interchangeable, you can create a video wall by joining several
of the same model
or joining different models to create a larger or more complex video
wall.
Vertically Joining
the Panels
Each MVP™ Ta8 Curve can be easily joined vertically using the 2 fast locks located at
the top corner of each panel and the vertical rigging located o
n the bottom of the panel at
each corner. These connectors can be recessed if not being used.
Vertical Joining
Procedure
Use the following instructions to join your panels vertically. Each step corresponds to the
number in the diagram.
1. Release fast lock lever as shown in step 1. Using the block behind the lever, push
up on the mechanism revealing the nipple.
2. Place the panel on top of the panel aligning the slot with the loop rod and the nipple
on the top of the panel.
3. Allow looped rod to fit over rig tab on the panel.
4. Push down on fast lock lever to securely lock the panel in place.
Step 1
Step 2
Step 4
Step 3

Joining Each MVP™ (Creating a Modular Design)
MVP™ Ta8 Curve User Manual, Rev. 1 9
Horizontally Joining
Panels
Each MVP™ Ta8 Curve can be easily joined horizontally using the 2 horizontal locking
knobs on the inside left-hand top and bottom of each panel to connect them
in a straight
90° orientation or
they can be joined using the adjustable locking arms on the inside
right-hand top
and bottom of each panel. Using the adjustable locking arms allows the
panels to be curved +/- 18°.
Horizontal Joining
Procedure
(90°)
Use the following instructions to join your panels horizontally.
1. Lift and turn knob as shown in step 1.
2. Pull adjoining panel and start the alignment process with the mechanism.
3. Lock the mechanism in place by turning both knobs as indicated in step 3.
Step 1
Step 2
Step 3

Joining Each MVP™ (Creating a Modular Design)
10- MVP™ Ta8 Curve User Manual, Rev. 1
Horizontal Joining
Procedure
(+/- 18°)
Use the following instructions to join your panels horizontally.
1. Loosen locking/adjustment knobs and pull arms out as shown in step 1 and 2.
2. Pull together adjoining panel, set the same angle on both arms and lightly tighten
adjustment knobs as shown in step 2. (This is for connection only and can be re-
adjusted later.)
3. Attach outer end of arms to adjoining panel and tighten all the locking knobs as
shown in step 3.
4. Set the adjustment knobs to the desired angle and tighten in place.
Step 1
Step 2
Step 3

Connecting (Cabling) Each MVP™
MVP™ Ta8 Curve User Manual, Rev. 1 11
6. Connecting (Cabling) Each MVP™
Testing Signal and
Power Connections
Each MVP™ Ta8 Curve has two (2) power supply sockets and two (2) signal sockets.
•The Power and Signal IN are located on the upper right-hand side of each panel.
•The Power and Signal OUT are located on the upper left-hand side of each panel.
•The Signal IN and OUT may be used interchangeably.
Each MVP™ Ta8 Curve has LED indicator lights.
•Each panel indicates a successful power connection when the Power indicator light
remains red.
•Each panel indicates video signal reception when the Link LED indicator light
displays green. This light should be blinking rapidly to indicate good reception.
Using the MVP™
Ta8 Curve
Test
Button
Each MVP™ Ta8 Curve also has a Test button, used to ensure all LEDs in each panel
are functional. Use the Test Button on each panel to perform a self-test. If self-
testing,
you must perform the test individually for each MVP™ Ta8 Curve
. You do not need to
connect to a signal or use software.
When using the Test button, make sure the MVP™ Ta8 Curve is not connected to
the VIP™ Driver.
To use the Test button, you must connect the power, but do not connect the signal
cables. Press the Test button to toggle through various LED light display configurations.
Signal Out
Power Out
Signal In
Power In
Link Indicator LED
Power Indicator LED
Test Button

Connecting (Cabling) Each MVP™
12- MVP™ Ta8 Curve User Manual, Rev. 1
Connecting the
Signal Input
The VIP™ video wall system uses 2 basic setup configurations to connect the signal to
the video wall:
1. A configuration using 24 or less panels.
2. A configuration using more than 24 panels.
The next section, Connecting Power and Signal Cables
, gives information on connecting
power and signal between joined panels and to the rest of the VIP™ system.
The following configuration of 24 panels shows a direct connection from the signal to the
VIP™ Driv
er into the first panel’s Signal Input socket. Refer to the VIP™ Driver Quick
Reference Guide for information and instructions on the VIP™ Driver.
The VIP™ system’s maximum signal load is 24 or less panels on a single signal
cable connection. When using more than 24 panels in a video wall design, you will
need a VIP™ Signal Distributor and additional signal cables to accommodate the
number of panels
over 24. A VIP™ Signal Distributor output supports up to 8
signal output lines, providing up to 192 total panels that can be connected from
the VIP™ Signal Distributor. You also can add more VIP™ Signal Distributors to a
VIP™ video wall system. Refer to th
e VIP™ Signal Distributor Quick Reference
Guide for more information.
Pixel limitation may limit to less than 192 panels.
VIP™ Driver
DVI-D
Backup
connection from
the last MVP™ in
the series
Single MVP™
(panel)
Signal Socket

Connecting (Cabling) Each MVP™
MVP™ Ta8 Curve User Manual, Rev. 1 13
Connecting Power
and Signal Cables
The following sections provide information and diagrams on connecting signal and power
between panels.
Refer to the Introduction or Operation
sections in this User Manual for available cables
and item numbers.
Connecting
the Signal Between
Joined Panels
Signal cable panel connections can use several different configurations. The basic
configuration to connect the signal from one panel to the next is as follows.
•The source signal is connected to the first panel.
•A signal cable is then connected from the first panel.
•The connections continue to daisy-chain until all panels are connected.
•The route of the cables used to make the signal connections can vary.
The following diagrams are recommended suggestions for signal connections between
24 or less panels, and more than 24 panels.
Refer to Connecting Signal Input
for information and instructions on connecting the
signal from the source.
This diagram shows an example of a simple signal connection using 24 or less MVPs.
Signal Jumper Cable
May be used to run
a backup line to the
VIP™ Driver
DVI-D
Video Signal Cable
in from VIP™ Driver
max. cable length
100 m/328 ft
VIP™ Driver

Connecting (Cabling) Each MVP™
14- MVP™ Ta8 Curve User Manual, Rev. 1
The following diagram shows an example of a signal connection configuration using
more than 24 panels. A video wall design with more than 24 panels requires:
•Incoming signal connection to the VIP™ Driver.
•VIP™ Driver connection to the VIP™ Signal Distributor.
•Signal cable connections as determined by the number of panels in the video wall
design and the desired layout, for ease of setup.
Every group of 24 panels will require another signal cable from the VIP™ Signal
Distributor. Eight si
gnal cables can be connected to a single VIP™ Signal
Distributor.
In this configuration, the backup from the driver may be connected to the last
panel in any group of panels, or to any free connection to the VIP™ Signal
Distributor, including input “B.”
VIP™ Driver
DVI-D
VIP™ Signal
Distributor
Up to 24 Panels
etherCON®
Up to 24 Panels
etherCON®
Signal Jumper Cable

Connecting (Cabling) Each MVP™
MVP™ Ta8 Curve User Manual, Rev. 1 15
Connecting the
Power Between
Joined Panels
Power cable panel connections can also use different configurations. The basic
configuration to connect the main power supply from one panel to the next is:
•The main power is connected to the first panel’s Power Input or Output.
•A powerCON® cable is then connected to the first panel’s Power Output and
connected to the next panel’s Power Input.
•The connections continue until all panels are connected.
The power input cord for the main is included when purchasing an 6-pack flight
case ONLY. CHAUVET® recommends the Neutrik® powerCON® extension cable,
item number PCLEAD50FT, available from CHAUVET®, if additional cables are
required.
Connect power between the panels using the same procedure as the signal only using
the Power Input and Power Output connectors. You must adhere to the power-linking
specifications for each MVP™ model.
Refer to the Power Linking section for details on the number of panels that can be
linked based on voltage from a single power connection.
Power linking more panels than recommended will void your warranty and
increase the risk electrocution or fire!
Refer to the following diagram for an example of power connection from the main and
to each connected panel.
This example is using an MVP™ Ta8 Curve power linking 7
panels horizontally
@ 120 V.
MAIN POWER IN
MAIN POWER IN
MAIN POWER IN

Typical MVP™ Installation
16- MVP™ Ta8 Curve User Manual, Rev. 1
7. Typical MVP™ Installation
Because a video wall system can include different components to provide a simple to complex modular wall design, use
the following steps as a general guide to get started.
Step 1
Open and examine the MVP™ Ta8 Curve flight case to make sure you have received all
products and accessories and that each one is in good condition.
Step 2
Apply power and run the self-test for each MVP™ Ta8 Curve to ensure all LEDs and inside
connections in each panel are working (optional).
Step 3
Create a stable mounting surface (i.e., truss or other stable surface) for MVP™ Ta8 Curve
mounting.
Step 4
Mount the top row of the MVP™ Ta8 Curves first. Refer to the Mounting section in this User
Manual.
Step 5
Adjust the alignment of the first row using the speego connectors.
Step 6
Connect the signal source to the VIP™ Driver. Connect the VIP™ Driver to the VIP™ Signal
Distributor (if applicable).
Step 7
Connect either VIP™ Driver or VIP™ Signal Distributor (if being used) to the Input Signal
socket of the first panel in your connection chain.
Step 8
Based on your video wall configuration (design), join each panel, either horizontally or
vertically, using the instructions in the section, Joining Each MVP™
(Creating a Modular
Design).
Refer to the instructions and information in the section of this User Manual, Connecting
(Cabling) Each MVP™.