Childcare Hola User manual

www.cnpbrands.com.au www.childcareproducts.com.au
Instruction Booklet
Hola Stroller
015410
Model
Hola Stroller
Additional products and accessories are available from leading department
stores and nursery speciality shops include:-
Portable Cots, Change Tables, Highchairs, Hook on Highchairs, Safety
Gates, Bed Guards, Rockers, Parasoles, Pramettes, Strollers, Walkers,
Nappy Bags, Rain Covers, Wooden Cots and Manchester.
Warranty
The manufacturer warrants this product to be free from defects in material and
workmanship under normal use and service following the date of purchase for
12 months. This warranty shall not apply to damages arising from neglect,
accidental damage to, or misuse of the product.
CNP Brands
20 Calarco Drive, Derrimut, VIC, 3030
Customer Service Number: 1300 667 137
e-mail: [email protected]
12
Line Drawings to be
inserted by Factory
Due to our continuing programme of development, Childcare reserves the right to
alter the specifications, colour or design without further notice.
Due to variations in the style and design of our products the illustrations used in this
instruction manual are generic.
This product is not intended for commercial use.
Features:
•Bassinet and Stroller Seat all in one. - No need for seperate items as
your child grows. Smart conversion seat which can be easily used in a
Bassinet or Seat configuration.
• Lightweight aluminium frame.
• Reversible seat.
• Adjustable handle height.
• Single action locking front swivel wheels.
• Independent front wheel suspension.
• Easy to manoeuvre.
• Pneumatic tyres.
• Can be folded with bassinet / seat (mother behind baby mode).
• Comes complete with semi raincover, sunshade and bootcover.
• Complies with the Australian Standard AS/NZS 2088:2000
Keep this booklet in a safe place for future reference
Note: Colour and features of product may differ from the diagrams shown

www.childcareproducts.com.au www.childcareproducts.com.au211
Some Do’ s and Don’ts
• Check that all safety locks are engaged before placing a child in the
stroller.
• Ensure your child is secured with a correctly adjusted safety
harness.
• Do not allow children to stand on the seat.
• Do not hang bags or goods from the handle as this could cause the
stroller to tip over.
• Do not place more than 3kgs in the basket, or 1kg in the canopy
pocket (if supplied).
• The weight of the child using this stroller alone should not exceed
17kg.
• The height of the child using the stroller should not exceed 96cm.
• The bassinet should not be used once the child can sit up unaided.
• Do not use accessories other than those supplied and approved by
Childcare Nursery Products.
• Never ride with more than one child in the stroller.
• Promptly replace worn out or broken parts.
• Always use the safety locks.
• Remove the child from stroller/pram before going up or down stairs
and escalators.
• Do not lift stroller by the bumper bar or tray (if supplied).
• To prevent the risk of the stroller catching fire, do not park it near
an open fire or a heater.
• Retain your warranty card and keep your sales receipt to provide
proof of purchase.
• Recommended tyre pressure: 20-25 PSI.
WARNING
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
• DO NOT LEAVE CHILDREN UNATTENTED.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU
ADJUST THE STROLLER OTHERWISE THEY MAY BE INJURED.
How to Care for your Childcare Stroller
Care and Maintenance
To prolong the life of your nursery product, keep it clean and do not
leave in direct sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm
water and a household soap or mild detergent. Allow it to dry fully,
preferably away from direct sunlight.
Helpful Hints
If the wheels squeak –use a silicon-based spray ensuring it
penetrates the wheel and axle assembly.
When using the stroller at the beach – completely clean your stroller
afterwards to remove the sand and salt from the mechanisms and
wheel assemblies. Dry thoroughly and lubricate with a silicon-based
spray.
Do Not Dry Clean or Bleach your Fabrics.
Do not machine wash, tumble or spin dry your fabrics, unless the
care labelling on the product permits these methods.
Non-removable fabrics covers and trims may be cleaned using a
damp sponge with soap or mild detergent. Allow it to dry completely
before folding or storing it away.
In some climates, the covers and trims may be affected by mould
and mildew. To help prevent this occurring, do not fold or store the
product if it is damp or wet. Always store the product in a well-
ventilated area.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required. To maintain the safety of
your nursery product, seek prompt repairs for bent, torn, worn or
broken parts. Use only those parts and accessories approved by
Childcare Nursery Products.
This product is not intended for commercial use.

www.childcareproducts.com.au www.childcareproducts.com.au
10 3
Open stroller
• Release folding lock as indicated.
• Lift handle, whilst pressing down on rear of the pram, until the frame
clicks and locks on both sides.
• Ensure the stroller is locked in on both sides before using.
Rear Wheel Assembly
• Whilst pressing down on the axle button,
place the axles into the holes on the rear of
chassis until they click into position.
• Ensure that they are securely fitted by
pulling firmly on the wheel.
Front Wheel Assembly
• Match the front forks with the
corresponding red and blue stickers.
• Push the swivel wheel pins into the front
frame, Make sure the locking button is
engaged and the wheels are securely
fitted.
Adjustable Handle
• To adjust the height of the handlebar, press
both adjustment buttons on handlebar and
move handlebar to desired position.
Warning: Many unrestrained children
sufferinjuries falling from strollers.
Use the safety harness at all times.
C
A
D
Slider
Buckle
Prongs
Buckle
Housing
Shoulder
Straps
B
Buckle
Prongs
Restraints
To secure the child in the harness, push
buckle Aand Binto the buckle housing C
until the buckle prongs snap into position.
Carefully adjust the waist harness by pulling
the slider Duntil the desired length is
achieved. Follow the same procedure to
adjust the shoulder strap.To release the
buckles, squeeze the top and bottom prongs
until the buckle disengages. Always adjust
the harness when changing seating positions.
Swivel Wheels
To enage swivel lock
• Push swivel lock down.
To disenage swivel lock
• Pull swivel lock up.
Brakes
To enage brake
• Push brake down.
To disengage brake
• Push brake up.
Locked Unlocked

www.childcareproducts.com.au www.childcareproducts.com.au
49
BASSINET MODE- MOTHER FACING BABY
To Assemble Bassinet
• Turn bassinet upside down, lift rear bar.
• Wrap studed fabric around bar and secure with studs.
To Attach Bassinet onto Stroller
• Line up side arms and push seat down until it
clicks into place. Ensure that the backrest
adjusting strap buckle is facing away from the
handle.
Recommended for newborn to approximately 6 months of age
To Attach Raincover/Sunshade
• Place raincover / sunshade over front of
hood.
• Zip raincover / sunshade onto hood.
• Press bottom silver buttons on both sides of
stroller frame simultaneously and lift
bassinet out. Turn seat around and place
back onto frame.
To Reverse Seat from MBB to MFB
To Fold the Stroller
Note: This stroller can be folded with the stroller seat attached (MBB
mode). For a more compact fold, the stroller seat can be removed from
the stroller seat.
• Remove bassinet / seat, lock front swivels.
• Press lever on right hand safety lock of the upper handlebar. With the
button held in, pull both handlebar trigger locks upwards. Gently push
down handle.
MBB
MFB

www.childcareproducts.com.au www.childcareproducts.com.au 5
8
• Place mattress into seat.
• Feed crotch strap through the bottom hole of
the mattress, and pull through waist straps
from side of mattress.
• The shoulder straps are to be placed under the
mattress.
Warning: To avoid strangulation hazard, the over
shoulder harness must be properly hidden
beneath the mattress.
To Attach and Remove the Hood
• Push each end of the hood into the plastic
holders located on either side of the seat frame.
• Attach press studs of hood onto stud on hood
ratchet.
• To remove hood, squeeze small clips on both
hood ends so hood can pull out through the
plastic holders.
To Attach Bootcover
• Place bootcover over bassinet and attach studs
to the side of the hood.
To Attach and Remove the Hood
• Push each end of the hood into the
plastic holders located on either side of
the seat frame.
• Attach press studs of hood onto stud on
hood ratchet.
• To remove hood, squeeze small clips on
both hood ends so hood can pull out
through the plastic holders.
To Attach Bootcover
• Place bootcover over stroller and
attach studs to the side of the hood.
To adjust angle of seat
• Press top oval silver buttons on both sides
of stroller frame simutaneously and adjust
to desired angle.
• Slide each end of the bumper bar into the
plastic holders located on either side of
the seat frame.
Warning: Do not use the bumber bar as
a carry handle.
To Attach Bumper Bar

www.childcareproducts.com.au www.childcareproducts.com.au
6 7
To Remove Bassinet from Stroller
• Press bottom silver buttons on both sides of
stroller frame simutaneously and lift bassinet
out.
WARNING: BASSINET CANNOT STAND ALONE
To Attach Raincover/Sunshade
• Place raincover / sunshade over front of hood.
• Zip raincover / sunshade onto hood.
STROLLER SUNSHADE
Blocks up to 75% of harmful UV Rays
This sunshade should not be used as a sole method of sun protection.
Always use in conjunction with the appropriate sunscreen protection
and ensure your child is appropriately clothed.
STROLLER MODE
To convert into stroller
MBB MFB
Warning: Before converting into stroller mode the mattress MUST be
Warning: When seat is in the fully reclined position in stroller mode, the hood
must be attached and fully secured at the back of the seat frame, as this will
form a safety head barrier at the top of the seat.
removed and the full five point harness MUST be used at all times.
To Form Footrest
• Buckle strap up that is under the front of
the bassinet.
To Form the Backrest
To lift seat upwards
• Hold the strap buckle in one hand and push
buckle upwards
To lower seat
• Press buttons on strap buckle and pull down to
desired position.