Childcare Overlander Deluxe User manual

www.childcare-prod.com.au www.childcare-prod.com.au
Instruction Booklet
Overlander Deluxe
013600
Model
Overlander Deluxe
Additional products and accessories are available from leading department
stores and nursery speciality shops include:-
Cots, Portable Cots, Change Tables, Highchairs, Hook on Highchairs, Safety
Gates, Bed Guards, Rockers, Parasoles, Pramettes, Strollers, Walkers,
Nappy Bags, Rain Covers, Wooden Cots and Manchester.
Warranty
The manufacturer warrants this product to be free from defects in material
and workmanship under normal use and service following the date of
purchase for 12 months. This warranty shall not apply to damages arising
from neglect, accidental damage to, or misuse of the product.
Childcare Nursery Products Pty Ltd
20-22 Lindaway Place Tullamarine Vic 3043
Phone: [phone] Fax: [phone]
email: [email protected]
8
Due to our continuing programme of development, Childcare reserves the right to
alter the specifications, colour or design without further notice.
Due to variations in the style and design of our products the illustrations used in this
instruction manual are generic.
This product is not intended for commercial use.
Features:
• Compact multi-position lie flat stroller suitable from newborn.
• Lockable front swivel wheel and one-touch rear wheel brakes.
• Three spoked wheels with pneumatic tyres to handle all terrains.
• Genuine suspension system in both front and rear wheels.
• Seat extension and removable bumper bar for baby’s comfort.
• Stylish European hood and shopping basket.
•Padded seat fitted with a full five-point safety harness.
• Supplied with hand-held safety strap.
•Complies with the AS/NZS 2088:2000 Australian Safety Standard.
Keep this booklet in a safe place for future reference
Note: Colour and features of product may differ from the diagrams shown

www.childcare-prod.com.au www.childcare-prod.com.au
How to Care for your Childcare Stroller
Care and Maintenance
To prolong the life of your nursery product, keep it clean and do not leave in
direct sunlight for extended periods of time.
Removable fabric covers and trims may be cleaned using warm water and a
household soap or mild detergent. Allow it to dry fully, preferably away from
the direct sunlight.
Helpful Hints
If the wheels squeak –use a silicon-based spray ensuring it penetrates the
wheel and axle assembly.
When using the stroller at the beach – completely clean your stroller
afterwards to remove the sand and salt from the mechanisms and wheel
assemblies. Dry thoroughly and lubricate with a silicon-based spray.
Do Not Dry Clean or Bleach Your Fabrics.
Do not machine wash, tumble or spin dry your fabrics, unless the care
labelling on the product permits these methods.
Non-removable fabrics covers and trims may be cleaned using a damp
sponge with soap or mild detergent. Allow it to dry completely before folding
or storing it away.
In some climates, the covers and trims may be affected by mould and
mildew. To help prevent this occurring, do not fold or store the product if it is
damp or wet. Always store the product in a well-ventilated area.
Always check parts regularly for tightness of screws, nuts and other
fasteners – tighten or replace if required. To maintain the safety of your
nursery product, seek prompt repairs for bent, torn, worn or broken parts.
Use only those parts and accessories approved by Childcare Nursery
Products.
This product is not intended for commercial use.
27
WARNING
•FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• PUT ON ALL THE BRAKES WHEN EVER YOU PARK THE STROLLER.
• DO NOT LEAVE CHILDREN UNATTENTED.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU
ADJUST THE STROLLER OTHERWISE THEY MAY BE INJURED.
Some Do’ s and Don’ts
•Check that all safety locks are engaged before placing a child in the stroller.
•Ensure your child is secured with a correctly adjusted safety harness.
•Do not allow children to stand on the seat.
•The Overlander Deluxe Stroller is NOT designed to accommodate a
Toddler Seat.
•Do not hang bags or goods from the handle as this could cause the
stroller to tip over.
•Do not place more than 5kgs in the basket, or 1kg in the canopy pocket
(if supplied).
•The weight of the child using the product should not exceed 17kg.
•The height of the child using the product should not exceed 96cm.
•Do not use accessories other than those supplied and approved by
Childcare Nursery Products.
•Never ride with more than one child in the stroller.
•Promptly replace worn out or broken parts.
•Always use the safety locks.
•Remove the child from stroller before going up or down stairs and
escalators.
•Do not lift stroller by the bumper bar or tray (if supplied).
•To prevent the risk of the stroller catching fire, do not park it near an
open fire or a heater.
•Retain your warranty card and keep your sales receipt to provide proof
of purchase.
WARNING
THIS STROLLER IS NOT DESIGNED FOR USE WITH A
SEPARATE TODDLER SEAT.
ATTACHING A TODDLER SEAT TO THIS STROLLER COULD
MAKE IT UNSTABLE AND MAY RESULT IN A CHILD BEING
SERIOUSLY INJURED.

www.childcare-prod.com.au www.childcare-prod.com.au 3
6
Folding the Stroller
• Apply rear brake and disengage swivel lock.
• Return seat to layback position.
• Close the hood and remove bootcover.
• Lift the secondary lock circled whilst
simultaneously pulling up the two release catches
located either side of the handle which will release
the elbow joints for smooth folding.
• Push the handle gently downwards towards the
floor, folding the handle underneath the back rest.
• Close the folding lock.
• For a compact fold, ensure the handle bar sits
under the backrest. The second position of the
upfold lock can then be used.
Warning: The brake must be engaged when folding the
stroller.
Assembling Instructions
Front Wheel Assembly
• Loosen the wheel bolt using the quick release
handle. There is no need to unscrew
completely.
• When there is a big enough gap on each side,
slide the bolt onto the hooks located on the
front of the chassis
• With the bolts you will find two ‘L’ shaped
washers which must hook into the small hole
located above the hook where the bolt sits.
• Tighten the bolt with both hands, again using
the quick release handle in one hand and hold
the bolt with the other hand. When you can
feel the bolt nearly tight, flip the quick release
handle back to lock into position. Gently pull
on the wheel to ensure that it is fitted
correctly and securely.
Brakes
•Push down the rear lever to park.
•Check to make sure the brake is on by trying to
push the stroller.
•Lift up to release.
Warning: Always apply brake when parking the
stroller.
To Open the Stroller
•Lift the folding lock.
•Lift the handle until it locks into position.
•Check that the latches on both sides are
locked before continuing assembly.
Bootcover
• Place bootcover over bumper bar and connect
the upper straps around the handle tube above
the leg handle mouldings, and over the lower
end of the bootcover under the seat where
velcro straps connect the front legs of each
side.
Warning: Always remove the bootcover before
folding the stroller.
Rear Wheel Assembly
• Place the axles into the holes on
the rear of chassis until they click
into position.
• Ensure that they are securely
fitted by pulling firmly on the
wheel.
Warning: Make sure these washers are
placed in exactly the same position on both
sides, failing to do this will cause your stroller
to veer to one side.

www.childcare-prod.com.au www.childcare-prod.com.au
4 5
Multiple Position Lieback Seat
Your stroller is fitted with a mulitple
position lieback seat to enable the
stroller to be used for a new born baby
through to the toddler stage.
•To recline, lift the lever on the back
seat and lower it into your desired
position.
•To raise seat, push the back gently
until the sit up position is required.
Attaching the Hood
•Slide sleeves at the bottom of the
hood onto either side of the frame,
just above the elbow joints.
•Join together the strap and velcro
points around the frame.
Operational Instructions
Seat Extension
•Press the button either side of the
footrest while either moving it up
or down to reach the desired
position.
Swivel Locks
•Push down and slide the red knob,
located on the wheel lock, to the
right.
•While in this position, your front
wheel will stay in the swivel
motion.
•To lock, push down and slide the
red knob to the left and with a
small amount of movement to the
front wheel it will automatically
lock into the fixed position.
Attaching the Bumper Bar
•Fit to each side of the Bumper
Bar onto the frame and close
locking clips.
•Remove Bumper Bar by releasing
locking clips and take off frame.
Warning: The
swivel must be in the
locked position when
in jogging or fast
walking modes.
Warning: Do not alter seat position
while child is in stroller.
Restraints
To secure the child in the harness,
push buckle Aand Binto the buckle
housing Cuntil the buckle prongs
snap into position. Carefully adjust the
waist harness by pulling the slider D
until the desired length is achieved.
Follow the same procedure to adjust
the shoulder strap.To release the
buckles, squeeze the top and bottom
prongs until the buckle disengages.
Always adjust the harness when
changing seating positions.
Warning: Many unrestrained
children suffer injuries falling
from strollers. Use the safety
harness at all times.
C
A
D
Slider
Buckle
Prongs
Buckle
Housing
Shoulder
Straps
B
Buckle
Prongs