Cisco 531 User manual

Cisco Headset 531 and Cisco Headset 532 with Cisco USB Adapter
For the Cisco IP Phone 8851, 8851NR, 8861, 8865, and 8865NR
Quick Reference Guide
High Sound Pressure—Avoid listening to high volume levels for long periods to
prevent possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before
you put the headset on. If you remember to lower the volume before you take
the headset o, the volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out
important external sounds, particularly in emergencies or in noisy environments.
Don’t use the headset while driving. Don’t leave your headset or headset cables
in an area where people or pets can trip over them. Always supervise children
who are near your headset or headset cables.
Incoming call Blinking green
Active call Steady green
Muted call
Steady green
Steady red
Incoming call Blinking red
Active call Steady red
Muted call Steady red

Cisco Headset 531 and Cisco Headset 532 with Cisco USB Adapter
For the Cisco IP Phone 8851, 8851NR, 8861, 8865, and 8865NR
Quick Reference Guide
Cisco and the Cisco logo are trademarks or registered trademarks of
Cisco and/or its affiliates in the U.S. and other countries. To view a list
of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective
owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Adjust your bass and treble
1. On your phone, press Applications .
2. Select Accessories.
3. Navigate Setup > Speaker > Tuning.
4. Press the Navigation cluster, left or right, to
adjust the tuning.
Adjust your speaker feedback
1. On your phone, press Applications .
2. Select Accessories.
3. Navigate Setup > Speaker > Sidetone.
4. Press the Navigation cluster, up or down, to
adjust the sidetone.
5. Select Set to apply your settings.
Adjust your microphone volume
1. On your phone, press Applications .
2. Select Accessories.
3. Navigate Setup > Microphone > Gain.
4. Press the Navigation cluster, left or right, to
adjust the gain.
Test your microphone
1. On your phone, press Applications .
2. Select Accessories.
3. Navigate Setup > Microphone > Test.
4. Press Record and speak into the microphone.
5. Press Stop rec when you nish speaking.
6. Press Play to review your test recording.
Put a call on hold and resume a call
1. Press on the USB adapter.
2. Optional: Select the call you'd like to resume.
3. Press on the USB adapter.
Put a call on hold and answer an
incoming call
Press on the USB adapter.
End a call and resume a held call
1. Hold on the USB adapter for 2 seconds.
2. Select the call you’d like to resume.
3. Press on the USB adapter.
End a call and answer an incoming call
1. Press on the USB adapter for 2 seconds
2. Press on the USB adapter.
Make a call
Press on the USB adapter and enter the phone
number on the phone keypad.
Answer a call
Press on the USB adapter.
End a call
Press on the USB adapter for 2 seconds.
Reject a call
Press twice on the USB adapter.
Adjust your volume
Press and on the USB adapter.
Mute yourself on a call
Press the on the USB adapter.
Unmute yourself on a call
Press the on the USB adapter.
For more information, visit:
https://www.cisco.com/c/en/us/products/
collaboration-endpoints/unied-ip-phone-
8800-series/index.html
Copyright. © 2018 Cisco Systems, Inc. All rights reserved.
March 2018