Cisco Cisco Headset 561 User manual

Cisco Headset 561 and Cisco Headset 562 with Multibase
For Cisco Jabber
Quick Reference Guide
Headset LED status indication
Incoming Call Blinking red
Active Call Steady red
Headset paired with dock White LED blinking every 4
seconds
Headset and dock not paired White LED blinking rapidly
High Sound Pressure—Avoid listening to high volume
levels for long periods to prevent possible hearing
damage.
When you plug in your headset, lower the volume of the headset
speaker before you put the headset on. If you remember to lower
the volume before you take the headset o, the volume will start
lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset,
it may block out important external sounds, particularly in
emergencies or in noisy environments. Don’t use the headset
while driving. Don’t leave your headset or headset cables in an
area where people or pets can trip over them. Always supervise
children who are near your headset or headset cables.
Power/Call
Mute
Volume +/-
Base LED status indication
Headset battery strength LEDs show solid as
battery charges
System update LEDs blink in
sequence left to right.
Headset and dock not paired All LEDs blinking
Sources
Bluetooth 
Micro USB port 
USB port
Bluetooth status indication
Bluetooth pairing LED blinking
Bluetooth connected LED shows solid
Bluetooth on but not
connected to a device LED pulsing
Bluetooth o LED o
Source call status
Selected source Steady White 
Incoming Call Blinking Green 
Active Call Steady Green 
Unselected source
with an active call Pulsing Green 
Muted Steady Red


Cisco Headset 561 and Cisco Headset 562 with Multibase
For Cisco Jabber
Quick Reference Guide
Cisco and the Cisco logo are trademarks or registered trademarks of
Cisco and/or its aliates in the U.S. and other countries. To view a list
of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.
Third-party trademarks mentioned are the property of their respective
owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1110R)
Turn on or o your headset
Hold for 4 seconds.
You will hear a tone indicating headset status.
Make and answer calls
Press .
Put a call on hold
Press .
If you have an incoming call, the headset will answer
automatically.
End a call
Hold until you hear a tone.
Reject a call
Press twice.
Adjust your volume
Press .
Mute yourself on a call
Press .
End an active call and answer an
incoming call
1. Hold until you hear a tone.
2. Press or press the source button on the
base.
For more information, visit:
http://www.cisco.com/go/jabber
http://www.cisco.com/go/headsets
Copyright. © 2018 Cisco Systems, Inc. All rights reserved.
January 2019
Pair your base with a Bluetooth device
1. Press

twice.
2. In your device settings, select your headset.
The headset base will show as "Cisco Headset"
followed by the last three digits of your headset
serial number.
Unpair and forget paired Bluetooth device
Hold

for 4 seconds.
Switch between audio sources
Press the desired call source on the headset base. The
source LED on the headset base shows steady white
when selected.
Answer a call from a dierent source
1. On the headset base, press the incoming call
source button.
2. (Optional) You can answer the call from the
incoming source. The base automatically switches
to the new active source.
Change the audio device in Cisco Jabber
for Windows
1. Click and select Use my computer for calls.
2. Click Audio Options and select Cisco Headset for
each audio eld.
3. Click to hear the volume at its current setting.
4. You can use the volume and mic sensitivity sliders
to adjust your speaker volume and mic sensitivity.
5. Click OK.
Change the audio device in Cisco Jabber
for Mac
1. Click and select Use my computer for
calls.
2. Click Audio Video/Preferences and select Cisco
Headset for each audio eld.
3. Click to hear the volume at its current setting.
4. You can use the volume and mic sensitivity sliders
to adjust your speaker volume and mic sensitivity.
5. Click OK.