Cisco 7832 User manual

Cisco IP Conference Phone 7832
Quick Start
1 | Page
Make a Call
Enter a number and press Call softkey.
Answer a Call
Press Answer softkey.
Put a Call on Hold
1. Press Hold.
2. To resume a call from hold, press Resume.
View Your Recent Calls
Press Recents softkey or press the up navigation key.
Press the “…” softkey to find Recents softkey.
View Your Favorites
View your Favorites press the down navigation key to see
your speed-dial numbers.
Your Phone
Mute bar
LED bar
Softkey buttons
Navigation bar and Select button
Volume key
LED Bar States
The LED bar illuminates to indicate status:
Green, solid—Active call
Green, flashing—Incoming call
Green, pulsing—Held call
Red, solid—Muted call
Add Another Person to a Call
1. From an active call, press Conf softkey.
2. Enter a number.
3. (Optional) Wait until you hear ringing or until the other
person answers the call.
4.
Press Conf softkey
Transfer a Call to Another Person
1. From a call that is not on hold, press Transfer.
2.
Enter the other person’s phone number.
3. (Optional) Wait until you hear ringing or until the other
person answers the call.
4. Press Transfer again.

Cisco IP Conference Phone 7832
Quick Start
Mute Your Call
1. Press Mute .
2. Press Mute again to turn mute off.
Listen to Voice Messages
Press Messages and follow the voice prompts.
Forward All Calls
1. Press Fwd all.
2.
Dial the number that you want to forward to
3. When you return, press Fwd off.
Adjust the Volume in a Call
Press Volume up or down to adjust the
volume when the phone is in use.
Adjust the Ringer Volume
Press Volume up or down to adjust the
ringer volume when the phone is not in use.
Change the Ringtone
1. Select Settings > Preferences > Ringtone.
2.
Scroll through the list of ringtones and press Play to
hear a sample.
3. Press Set and Apply to savea selection.
For further information on other Masergy supported telephones, please visit the Masergy IP Phones webpage.
CONTACT US: USA +1 [phone] | UK [phone] | [e-mail]