Dual-Mode Internet Telephony KitDual-Mode Internet Telephony Kit
1010 Chapter 3: Getting StartedChapter 3: Getting Started
Getting Started with the Base StationGetting Started with the Base Station
Getting Started with the Base StationGetting Started with the Base Station
TTo connect the base o connect the base station, follow these instructions:station, follow these instructions:
1.1. If you have a If you have a landline, landline, connect a RJconnect a RJ-11 telephone li-11 telephone line cord (includene cord (included) to the Ld) to the LINE port of INE port of the base stationthe base station..
Then connect the other end to your telephone wall jack. If only the Then connect the other end to your telephone wall jack. If only the landline is connected you can only makelandline is connected you can only make
and receive calls over and receive calls over the landline.the landline.
2.2. Connect thConnect the Ethernet Re Ethernet RJ-45 cable (incJ-45 cable (included) to tluded) to the Ethernet he Ethernet port of port of the base statthe base station. Then cion. Then connect the onnect the otherother
end to a network Ethernet jack. If only the end to a network Ethernet jack. If only the Ethernet cable is connected, you can only make and Ethernet cable is connected, you can only make and receivereceive
Skype or SkypeIn calls.Skype or SkypeIn calls.
3.3. Connect the Connect the included power adincluded power adapter to the poapter to the power port of twer port of the base station. he base station. Then plug the poweThen plug the power adapter intor adapter into
an electrical outlet.an electrical outlet.
Proceed to the next section, Proceed to the next section, “Powering On the Handset.“Powering On the Handset.””
PoweriPowering On the ng On the HandsetHandset
When the handset is fully When the handset is fully charged, press and release thecharged, press and release the Power/End CallPower/End Callkey; this will power on key; this will power on the handset. Tothe handset. To
power off the handset, press thepower off the handset, press the Power/End CallPower/End Callkey until you will key until you will see the Skype menu. Scroll tosee the Skype menu. Scroll to SwitchSwitchOffOff..
PressPress SelectSelectand the phone will power off.and the phone will power off.
•• StanStandby mode is whedby mode is when the phone is on, but nn the phone is on, but not in use. In staot in use. In standby modndby mode your phone dise your phone displays sigplays signal strenal strength,ngth,
handset number (in parenthesis), battery charge status, Skype status, user handset number (in parenthesis), battery charge status, Skype status, user i.d. and time.i.d. and time.
Figure 3-3: Connect to theFigure 3-3: Connect to the
LINE PortLINE Port
Figure 3-4: Connect to theFigure 3-4: Connect to the
Ethernet PortEthernet Port
Figure 3-5: Connect to theFigure 3-5: Connect to the
Power PortPower Port