Cisco Small Business Pro SPA 502G User manual

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
CISCO SPA502G

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
Configuring Cisco SPA502G
1. View and record the unique MAC address of the handset which can be found at the
base of the handset.

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
2. Logon to the jingl web portal, using specific customer domain URL
https://’customer’.jingl.com.au
Enter your User Name and Password
Presented with Dashboard

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
3. Select and click the settings menu
4. Click on “Add new”
In general tab, choose and enter extension number and a display name

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
5. Select and expand Provisioning tab. Enter the MAC address of the phone
6. Select and expand Hardware Type. Select the phone model

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
Click Add to finish your extension configuration.
7. Connect your phone on the network with a DHCP server, and find out phone’s IP
address.
On handset press Menu > Network > Current IP Address (Menu, 9,2).
8. Use a compatible browser to browse the phone web menu using phones IP address
Login to the web interface go to “Admin Login” and select “Advanced”

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
9. Browse to settings Provisioning Server

Head Office:
Level 1 21 Shierlaw Ave Canterbury 3126, Victoria, Australia
1300 0 JINGL
1300 0 54645
www.jingl.com.au
10. Enable the provision and set the “Profile Rule” with the following string
“http://tftp.jingl.com.au/$MA.cfg”
11. Click on “Submit All Changes” button to save the configuration
12. Restart the phone for the new settings to take place, the phone will download and
configure all settings from the provisioning server as well as any necessary firmware
files.