CombiSteel 7013.2400 User manual

Glass Polisher
7013.2400
User Manual
Gebruikershandleiding
Gebrauchsanweisung
Le mode d’emploi

2
www.combisteel.com
CONTENT
ENGLISH
Technical specifications ..........................................................................................................................................3
Installation ..............................................................................................................................................................3
Operating Instruction..............................................................................................................................................4
Cleaning the external surface .................................................................................................................................4
Replacing the brushes.............................................................................................................................................4
Problems and solutions ..........................................................................................................................................5
Wiring diagram .......................................................................................................................................................5
Spare parts.............................................................................................................................................................. 6

3
www.combisteel.com
Technical specifications
AC 230V 50Hz 1250W
Capacity: 350 GLASSES PER HOUR
Dimension: 32.5 x 30 x 50cm H
Weight: 15.5 Kgs
Air flow: 164 CFM
Hot air temperature: 55-60°C
12.5 Amp
Installation
1. Installed the Air tube on the machine and screwed.
2. Insert the shortest brush on the center roller
3. Insert the remaining 4 brushes on the rollers
Plug in and it is now ready to use.

4
www.combisteel.com
Operating Instruction
ATTENTION!
GLASSES AND CUPS HAVE TO BE WET, PREVIOUSLY WASHED AND RINSED BEFORE DRYING AND POLISHED WITH
THE MACHINE.
This machine with 5 brushes is ideal to dry or polished all of various cup & glasses.
The center brush is used for drying the inside of a glass, while the four outside brushes use for polishing the
outside.
Wash the glass, grasp the glass at the base and insert into the central brush. Leave it in the drying position
for a few seconds. (Photo 1 )
For the flute glass, first dry the steam putting it between the brushes than grasp the glass from the base to
dry the cup (Photo 2.)
WARNING:
THE MACHINE SHOULD NEVER BE USED OR OPERATED WITHOUT THE BRUSHES AND AIR CONVEYING
MANIFLOD IN PLACE.
WHEN THE MACHINE IS RUNNING. DO NOT THE ROATING BRUSHES WITH BARE HANDS AND DO NOT INSERT
OBJEXTS OTHER THAN GLASS IN BETWEEN THE BRUSHES.
DO NOT INTRODUCE OTHER OBJECTS INTO THE VENTILATION OPENINGS OF THE MACHINE BECAUSE THEY
COULD COME INTO CONTACT E WITH POWERED PARTS AND CAUSE SHORT CIRCUITS WITH CONSEQUENT
RISK OF FIRES AND ELECTRIC SHOCKS.
ALWAYS WEAR A CAP COVERING ALL OF YOUR HAIR IF IT IS LONG.
Cleaning the external surface
Clean the external surface of the machine once a day in order to remove the substances that may have deposited
on these surfaces. Use a damp sponge and dry the surfaces with a soft cloth. Do not immerse the machine in
water or wet it.
Replacing the brushes
The machine have five brushes with central one being smaller as compared to the others. Disconnect the
machine from the power supply and unplugged it. Remove the brushes by rotating them counter clock wise and
removing them from the top. Mount the new brushes one at a time by inserting them into their slots and rotating
them clockwise to fix them in place (until the snap in place.) Connect the machine to the power supply and press
the PN/OFF switch.

5
www.combisteel.com
Problems and solutions
If the polisher doesn’t work, Please check one by one as below:
1. Plug the machine into a grounded outlet.
2. Turn the power switch on.
3. Be sure the machine is plugged and the brushes are properly fixed.
4. Check the air blower.
Wiring diagram

6
www.combisteel.com
Spare parts

7
www.combisteel.com

8
www.combisteel.com