Commander T46G User manual

Commander Pty Ltd
Level 10, 452 Flinders St
Melbourne VIC 3000
ABN 85 136 950 082
COMMANDER PHONE
T46G GIGABIT IP PHONE
QUICK REFERENCE GUIDE
> Please read carefully before use.

COMMANDERPHONE T46G GIGABIT IP PHONE
How to Place a Call
Using the handset
• Pick up the handset
• Enter the number, then press the Send soft key
OR Using the Speakerphone
• With the Handset on-hook, press
• Enter the number, then press the Send Soft key
OR Using the Headset
• With the headset connected, press to activate the
headset mode
• Enter the number, then press the Send soft key
How to End a Call
Using the handset
• Hang up the handset, or press the End Call soft key
OR Using the Speakerphone
• Press or the End Call soft key
OR Using the Headset
• Press the End Call soft key
Contact Directory
To access the directory and add a Contact
• Press the Directory soft key
• Press Option soft key then Add from the prompt list to add
• Enter contact name and number
• Press Save soft key to accept change
How to place a Call on Hold
To place a call on hold
• Press or the Hold soft key during an active call
To resume the call, do one of the following:
• Press or the Resume soft key
If there is more than one call on hold
• Press or to switch between calls, then press
or the Resume soft key to retrive the desired call
How to create a Conference call
To create a Conference call
• Press the Conference soft key during an active call
• Enter the extension or external number of the second party, then press the Send
soft key
• Press the Conference soft key again when the second party answers. All parties are
now joined in the conference
How to Forward a Call
To enable Call Forwarding
• Press the menu soft key when the phone is idle, and then
select Call Features > Call Control > Call Forward
Select the desired forward type:
Always Forward
Busy Forward
No Answer Forward enter the ring time to wait before
forwarding
For No Answer press the Save soft key to accept
How to Transfer a Call
You can transfer a call in the following ways:
BLIND Transfer - The call is transferred directly without the
need to announce the caller
• Press or the Transfer soft key during an active call.
The call is placed on hold.
• Enter the number you want to transfer to
• Press or the Transfer soft key
ASSISTED Transfer - Allows you to announce the caller prior to
releasing the call
• Press or the Transfer soft key during an active call.
The call is placed on hold.
• Enter the number you want to transfer to
• When the second party answers announce the call, then
press or the Transfer soft key
Call History
While the phone is idle
• Press the History soft key to view missed, received and
placed calls
• Press or to scroll through the list
• Select an entry from the list
• Press the Send soft key to place a call
• Select Option soft key, then Detail from the prompt list
view information about the entry OR
• Select Add to Personal to add to your Local Directory
Line Buttons Message
Indicator Light
Soft
Keys
Navigation
Buttons
Volume Control
Press -/+ to adjust volume Headset Mute
Messages Hold
Redial Transfer
Speaker
How to Answer a Call
Using the handset
• Pick up the handset
OR Using the Speakerphone
• Press or the Answer soft key
OR Using the Headset
• Press
The first time you access call history or contact directory you may
be prompted to enter your Command Central password available
from your site administrator.