Commander T48G User manual

Commander Pty Ltd
Level 10, 452 Flinders St
Melbourne VIC 3000
ABN 85 136 950 082
COMMANDER PHONE
T48G GIGABIT IP PHONE
QUICK REFERENCE GUIDE
> Please read carefully before use.

COMMANDERPHONE T48G GIGABIT IP PHONE
How to Place a Call
Using the handset
• Pick up the handset
• Enter the number, then press the Send soft key
OR Using the Speakerphone
• With the Handset on-hook, press
• Enter the number, then touch the Send Soft key
OR Using the Headset
• With the headset connected, press to activate the
headset mode
• Enter the number, then press the Send soft key
How to End a Call
Using the handset
• Hang up the handset, or press the End Call soft key
OR Using the Speakerphone
• Press or the End Call soft key
OR Using the Headset
• Press the End Call soft key
Contact Directory
To access the directory and add a Contact
• Touch the Directory soft key
• Touch the Add button from the menu to add
• Enter contact name and number
• Touch the Save soft key to accept change
How to place a Call on Hold
To place a call on hold
• Press or touch the Hold soft key during an active call
To resume the call, do one of the following:
• Press or touch the Resume soft key
If there is more than one call on hold
• Use the touch screen to switch between calls on hold, then
press or touch the Resume soft key to retieve the
desired call
How to create a Conference call
To create a Conference call
• Touch the Conference soft key during an active call
• Enter the extension or external number of the second party
• Touch the Conference soft key again when the second party answers. All parties are
now joined in the conference
How to Forward a Call
To enable Call Forwarding
• Touch the menu soft key when the phone is idle, and then
select Call Features > Call Control > Call Forward
Select the desired forward type:
Always Forward or Busy Forward or No Answer Forward
• Touch the ‘on’ button and enter the number to forward to
• Enter the ring time (in seconds) to wait before forwarding
• Touch the Save soft key to accept
How to Transfer a Call
You can transfer a call in the following ways:
BLIND Transfer - The call is transferred directly without the
need to announce the caller
• Press or the Transfer soft key during an active call.
The call is placed on hold.
• Enter the number you want to transfer to
• Press or the Transfer soft key
ASSISTED Transfer - Allows you to announce the caller prior to
releasing the call
• Press or the Transfer soft key during an active call.
The call is placed on hold.
• Enter the number you want to transfer to
• When the second party answers announce the call, then
press or the Transfer soft key
Call History
While the phone is idle
• Touch the History soft key to view missed, received and
placed calls
• Press or to scroll through the list
• Select an entry from the list
• Touch an entry from the list to place a call
• Touch the button to view information about the entry
• Select Add to Personal to add to your Local Directory
How to Answer a Call
Using the handset
• Pick up the handset
OR Using the Speakerphone
• Press or the Answer soft key
OR Using the Headset
• Press
The first time you access call history or contact directory you may
be prompted to enter your Command Central password available
from your site administrator.
Touch Screen
Soft Keys
Message
Indicator Light
Touch
Screen
Soft
Keys
Navigation
Buttons
Volume Control
Press -/+ to adjust volume Headset Mute
Messages Hold
Redial Transfer
Speaker
i