Converters.TV 998 Scan converter User manual

Component & PC to Composite Video
Scan Converter - ID# 998
Operation Manual

Introduction
The Component & PC to Composite Video Scan Converter is
designed to down scale Component and PC VGA signals to an
analog Composite Video NTSC or PAL signal. Supporting SD HD
Component input from 480i p to 1080i p and PC resolutions VGA up
to WUXGA@60hz, this scan converter scales down to either SD PAL or
NTSC video for CV (yellow plug) connection to SDTV's. This allows for
newer technology equipment to be connected to older style TV's.
With many functions such as 3D noise reduction, frame rate
conversion (PAL NTSC), adaptive contrast enhancement , overscan &
underscan, aspect ratio selection, OSD menu control and no software
required, this unit is ideal for commercial or private home use.
The Component & PC to Composite Video Scan Converter uses a
standard 15 15 pin D-sub cable or a 15 pin D-sub to 3 RCA Plug cable
for connection to the source equipment. Use a yellow plug RCA
cable for connection from the converter to the Composite Video
input of your TV. Audio (L R red and white) is connected directly from
the source audio output to the TV's CV audio input. Power is supplied
from a 5vDC source. LED light indicates status of power and output
PAL or NTSC video signal.
NOTE:
• Not support interlace source signal conversion between 50 60Hz
• Not support 480i and 1080i@60Hz to PAL frame rate conversion
• Not support 576i and 1080i@50Hz to NTSC frame rate conversion
Applications
• Security camera display or DVD Game Console
• Displaying Component or PC signal on the CRT display
• Displaying Component or PC signal on the LCD display
System
Requirements
Input source equipment such as VGA Component camera (RGBHV YPbPr)
signal with D-Sub 15pin or component adapter cable and output to TV with
CVBS input jack and RCA connection cable.
Features
• Converts video signal from PC Component source to NTSC or PAL signal
• Accepts a wide range of Component input resolution from 480i p to
1080i p@60Hz and PC from VGA to WUXGA@60RB
• 3D noise reduction in both temporal and spatial domain
• Frame rate conversion (PAL NTSC)
• Adaptive contrast enhancement
• OSD Display
• Overscan and underscan adjustment
• Phase and Aspect adjustment
• No software installation require
• Compact and elegant design

Operating Functions
and
Controls
Top Panel
1. MENU Button (Hold): Press this button for 1 second to bring up the OSD
which will display the input timing and output TV system information.
While the OSD is still displaying press the button again for 5 seconds to
s itch to second tier OSD menu here changes can be made for e.g.
output TV system from NTSC to PAL or from PAL to NTSC, Overscan,
Underscan, Aspect ratio etc. (Press the button to sequentially select the
desired parameter to be set.)
2. Power LED: This LED ill illuminate in RED hen the po er supply
is connected.
Input Port
PC VGA
Component Y/Pb/Pr
1. PC IN: Connect to source equipment such as PC, laptop or
digital camera with a D-sub 15pin output using a standard 15 pin D-
sub VGA cable.
1. Component In: Connect to source equipment such as
DVD VCR PVR player with a D-sub 15 pin to 3 RCA cable.
Output Port
Composite Video

1.CV OUT: Connect with display TV or monitor with RCA cable for output
image display.
2. 5v DC: Plug the 5V DC power supply into the unit and connect the adapter
to AC wall outlet.
OSD Menu
IN 640 x 480 (Input
Timing)
Press the Menu button once to
operate the OSD to display the
Source and Sink(monitor)
information.
OUT NTSC (Output TV
System)
NT C TV System Output
PAL TV System Output
UNDERSCAN 1
Re er to diagram 1UNDERSCAN 2
OVERSCAN
PHASE ADJ 0~31 Phase adjustment's range is from
0 to 31 and is for blurry image
display and/ character jiggle
onscreen
ASPECT ADJ
Full Screen To allow the image to fill the
screen of the TV (Diagram 2)
Letterbox To display in wide-screen format.
(Diagram 2)
Pan and Scan Crops wide-screen film images to
better display in 4:3 ratio
(Diagram 2)
Auto TV 4:3 Allows the device to auto detect
input aspect ratio of 4:3
(Diagram 2)
Auto TV 16:9 Allowing the device to auto
detect input aspect ratio of 16:9
(Diagram 2)
Diagram .

Diagram 2.
Support Input
Timing
640x480 60,72,75,85Hz PC Timing
720x400 70Hz
800x600 56,60,72,75,85Hz
1024x768 60,70,75,85Hz
1152x864 70,75,85Hz
1280x720 59,60Hz
1280x768 60rb,60Hz
1280x800 60rb,60Hz
1280x960 59,60Hz
1280x1024 59,60Hz
1366x768 60rb,60Hz
1440x900 60rb,60Hz
1600x1200 60Hz
1680x1050 60rb,60Hz