Courtyard Creations TGS18LA-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
TGS18LA-WM
Do not sit or stand on this table.
Do not discard any of the packaging until you have checked that you have all the parts and pack
of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by
children. Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
Please quote following FQC NO. when contacting service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
PAGE 1 OF 2 COURTYARD CREATIONS INC.
!
!
!
!
!
STOP DON’T RETURN TO STORE!
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1 1
2
3
4
5
6
7
2
1
16
16
16
2
TGS18LA-CS01
TGS18LA-CS02
62TGS18LAI101
17C33A0703001Y4
17FA05040301-Y4
1800337004
17KAA0101----Y4
TABLE TOP
LEG
SUPPORT
BOLT M6*12
WASHER d6.5*D13*1.0
BOLT CAP
HEX.KEY WRENCH 4MM
FIGURE 1
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside
facing upwards. Fasten the legs (#2) to the
table top (#1) by using bolts (#4) and washers
(#5). keep the bolts loose. See Figure 1. 22
1
4
5
6
4
5
6

Missing A Part?
No Need To Go Back To
TheStore!
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
Call Toll Free
TEL: [phone]
FAX: [phone]
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
The store where you made your purchase
does not stock parts for this item
if you need parts,
whether they are missing or damaged.
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free
TEL: [phone]
FAX: [phone]
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
PLEASE SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
SHOULD YOU NOTLOCATE ALL OF THE ABOVE PARTS, PLEASE INSPECTALL
PACKING MATERIAL FOR ANY SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED IN SHIPMENT.
SHOULDYOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTIS MISSING OR DAMAGED,PLEASE CALL THE HELP LINE 1-877-539-7436
BEFORERETURNING THEITEM TO THE STORE.
PLEASE PROVIDE THEFOLLOWING INFORMATION:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
SHOWN ON ASSEMBLY INSTRUCTIONS.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
PAGE 2 OF 2
STOP DON’T RETURN TO STORE!
FIGURE 2 FIGURE 3
Step 2:
Fasten the supports (#3) to the legs (#2) by
using bolts (#4) and washers (#5). Make sure
that all of the bolts have been tightened
completely, and then cover them with bolt caps
(#6). See Figure 2.
Step 3:
Turn the table to its upright position. See Figure 3.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry frame completely. Do not use
bleach, acid, or other solvents on the frame parts.
•Wash glass with mild soap and water, rinse thoroughly, and dry glass completely.
•Please inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance
and safety of your table.
•When moving the table, do not drag.
•We recommend the use of furniture covers when not in use.
•In order to prolong the life and beauty of your table, we recommend it be stored in a dry and
protected area during off season periods.
22
3
3
4
4
56
56