Creality Sonic Pad User manual

Creality Sonic Pad
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –49
Čeština
50 –95
Slovenčina
96 –141
Magyar
142 –188
Deutsch
189 –235

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
󲐜󲐝󲐞󲐟󲐠www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Product Description
When the Creality Sonic Pad is connected to the FDM printer via a USB cable, it becomes
the core system of the printer.
Hardware Specifications
CPU
T800
RAM
2GB
ROM
8GB
USB 2.0 interface
4
Screen resolution & size
1024x600 & 7 Inch
Wi-Fi protocol
IEEE 802.11b/g/n
LAN interface
100M
Gsensor interface
PS/2
Power interface
DC 2.5
Input voltage
12V
Packing list

5
•Creality Sonic Pad x1
•12V power adapter (including adapter) x1
•G-sensor data cable x1
•G-sensor x1
•USB cable x1
•USB drive x1
•Micro USB to Mini USB connector x1
•Micro USB to Type-C connector x1
•Instructions x1
•Screw Pack x1
M3*8 self-tapping screw X2
M3*8 machine screw X2
M3*6 machine screw X2
Interface and button description
Reset
G-sensor interface
Speaker
Lan interface
USB 3
USB 4
12V power interface

6
Operation Precautions
•Please use the product strictly in accordance with this manual to avoid personal
injury and property damage.
•Do not place the machine near any heat source or flammable or explosive
objects. We suggest placing it in a well-ventilated, low-dust environment.
•Please use the power adapter that comes with the machine to prevent damage to
the machine.
•Do not place this product in a vibration or unstable environment.
•Please power off to clean the product regularly.
•Users should comply with the laws and regulations of the corresponding
countries and regions where the equipment is located (used), abide by
professional ethics, pay attention to safety obligations, and strictly prohibit the
use of our products or equipment for any illegal purposes. Creality will not be
responsible for any violations legal liability under any circumstance.
System status light
Power indicator
Power button
M3 mounting holes
USB 1
M3 mounting
holes
USB 2

7
First use
1. Device connection
2. Connect the Creality Sonic Pad to the AC110V/220V power supply using the
power adapter.
3. Connect the Creality Sonic Pad and 3D printer with a USB cable to your printer
(Use the correct adapter if necessary).
4. Boot Settings
After the connection is completed, press the power button of the Creality Sonic
Pad to enter the boot-up operation (follow the order of the guide instructions to
configure the product).
1. Startup screen
2. Select language

8
3. Select region
4. Network settings (optional)¨
5. Add a network (optional)
6. The network connection
completed (optional)
7. Privacy setting, click next after
reading and agree by selecting the
checkbox
8. Device Rename
9. Printer firmware flashing (upgrade via SD/TF card)
10. Select printer model (users need to open up the printer to check the
motherboard chip model.)

9
11. Taking the model Ender-3 S1 as an example, after selecting the model, you will
enter the flashing guide page. Please prepare a card reader and memory card for
the printer flashing.
12. Write the firmware to the SD/TF card, then insert the SD/TF card into the printer,
click Next step.

10
13. After the printer is powered on, the Creality Sonic Pad will automatically connect
to the printer. (the firmware in SD/TF will be automatically flashed after the
printer is powered on)