Crestron Isys i/O TPMC-8X User manual

Crestron TPMC-8X
Isys i/O®8.4” WiFi Touchpanel
Operations Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
Windows®, Windows®XP and Windows®Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
©2009 Crestron Electronics, Inc.

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Contents
Isys i/O®8.4” WiFi Touchpanel: TPMC-8X 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Specifications ..............................................................................................................4
Physical Description....................................................................................................7
Industry Compliance .................................................................................................11
Setup ........................................................................................................................................12
Identity Code .............................................................................................................12
Internal Battery Switch..............................................................................................12
Configuring the Touchpanel......................................................................................13
Hardware Hookup ..................................................................................................... 47
Recommended Cleaning............................................................................................48
Programming Software............................................................................................................49
Earliest Version Software Requirements for the PC .................................................49
Programming with Crestron SystemBuilder.............................................................. 49
Programming with SIMPL Windows ........................................................................49
Programming with VisionTools Pro-e....................................................................... 51
Embedded Applications.............................................................................................54
Defaults for Embedded Windows Applications ........................................................55
Programming Embedded Windows Applications......................................................56
Example Program ......................................................................................................57
Uploading and Upgrading........................................................................................................ 58
Establishing Communication.....................................................................................58
Programs, Projects and Firmware.............................................................................. 58
Program Checks ........................................................................................................ 59
Operation .................................................................................................................................60
Power Options ...........................................................................................................60
Charging the Internal Battery ....................................................................................61
Security Infrastructure...............................................................................................61
Problem Solving ......................................................................................................................63
Troubleshooting......................................................................................................... 63
Reference Documents................................................................................................64
Further Inquiries ........................................................................................................ 65
Future Updates .......................................................................................................... 65
Appendix A: TPMC-8X Security Pack (Atheros) ..................................................................66
Appendix B: TPMC-8X Security Pack (Intel PROSet) ..........................................................70
Appendix C: TPMC-8X Multi-Language Pack ......................................................................75
Software License Agreement................................................................................................... 76
Return and Warranty Policies ..................................................................................................78
Merchandise Returns / Repair Service ...................................................................... 78
CRESTRON Limited Warranty.................................................................................78
Microsoft® Windows XP®Embedded End User License Agreement .................................... 79
Operations Guide – DOC. 6539C Contents •i

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Isys i/O®8.4” WiFi Touchpanel:
TPMC-8X
Introduction
The Isys i/O®TPMC-8X is a compact, stylish Wi-Fi touchpanel featuring the
Windows®XP Embedded OS to deliver a 2-way wireless control solution with
blazingly fast performance and native capabilities for browsing the Internet,
streaming multimedia and much more. A brilliant 8.4" (21.3 cm) active-matrix
SVGA display and 16-bit color depth combine to produce stunning 3D graphics
using DNav dynamic menu objects, dynamic graphics and text, animations,
multimode objects, PNG translucency and exclusive Synapse™ image rendering - all
with astonishing speed.
Features and Functions
• Stylish and compact ergonomic design
• 8.4 in (21.3 cm) active matrix touchscreen display with 800 x 600
resolution
• 16-bit Isys i/O®graphics with Synapse™ image rendering algorithm
• Windows®SideShow®enabled
• DNav dynamic menu objects
• 802.11a/b/g WiFi 2-way wireless communications
• Windows®XP Embedded operating system
• Onboard PC applications for Web browsing, streaming media,
conferencing, VoIP and remote computer access
• Wireless video from network cameras and servers
• Direct panel-to-panel intercom over IP
• Integrated SIP phone capability
• Built-in microphone and stereo speakers
• 5-way thumbpad and four “hard key” buttons
• Includes stylus with onboard storage slot
• Built-in biometric fingerprint scanner
• Internal Li-Ion battery pack included
• External “booster” battery pack available
• Optional desktop and wall mount docking stations
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •1

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Advanced Ergonomics
Incredibly thin and compact, the TPMC-8X is brilliantly designed to provide a
powerful mobile control solution that is easy to hold and intuitive to use. Its
magnesium alloy enclosure presents a sleek, modern appearance that is both rugged
and lightweight.
Tactile Controls
An integrated 5-way thumbpad and up/down arrow buttons add quick access and
tactile response for controlling functions ranging from simple volume adjustment
and channel selection to on-screen menu navigation or even pan/tilt camera control.
Four additional “hard key” buttons are positioned below the touchscreen,
programmable for context sensitive menu functions. A stylus is even included for use
with the on-screen keyboard, conveniently stowed in its own storage slot.
Biometric Scanner
The built-in fingerprint scanner unleashes a whole new level of convenience and
security, allowing individual users to be identified instantly and logged on
automatically. With just the touch of a fingertip, each user can be presented with a
unique graphical interface with its own set of preferences, access privileges and even
its own look through the use of touchpanel “skins”.
WiFi Wireless
Integrated 802.11a/b/g WiFi technology with WEP encryption delivers secure, high
speed 2-way wireless performance across wireless LANs, affording mobile freedom
and seamless communications with Crestron control systems, computers, digital
media servers and other IP-based devices.
Embedded PC
The power of Isys i/O is in its embedded PC engine, combining rock solid
touchpanel performance with built-in Windows Media®Player and RealPlayer®,
Internet Explorer, Adobe®Acrobat®Reader and Microsoft Word, Excel and
PowerPoint®document viewers. While simultaneously controlling your home
theater, boardroom or lecture hall, the TPMC-8X provides everything needed for
enjoying online music and movies, viewing Web pages and accessing most types of
digital media without necessitating a separate computer.
Support for Windows®SideShow®gives the TPMC-8X access to all kinds of PC and
Web based content such as news feeds, sports scores, stock tickers, weather alerts,
media guides, email messages and appointment notifications all through a simple
network connection to a Windows Vista™ computer.
VNC viewer support delivers enhanced cross-platform interaction with remote
computers over the network or Internet, allowing access and control of desktop
applications with live presentation capability.
Built on the Windows XP Embedded operating system, the TPMC-8X delivers a
powerful and secure platform for touchpanel control with integrated PC capabilities.
Programmatic control erases the lines between control system and PC, allowing
programmers to customize each application’s behavior within the touchpanel
environment to create a truly powerful and user-friendly interface.
2 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Wireless Video
For presentation preview, surveillance or pure entertainment, the TPMC-8X makes it
easy to view security cameras, movies and other video sources right on the
touchscreen. In addition to the wide range of streaming video formats supported by
its onboard media player applications, the TPMC-8X also features native support for
video over IP from a variety of third-party Web cameras and servers using the
motion-JPEG format.
Audio Features
Built-in stereo speakers and headphone output provide clear audio for streaming
media and internal PC applications and enable 2-way intercom and VoIP
communications in combination with the integrated microphone. Customized WAV
files can be loaded on the touchpanel to add dimension to the touchscreen graphics
with personalized sounds, button feedback and voice prompts.
Intercom and Telephone
Built-in IP intercom capability facilitates direct panel-to-panel intercom and
monitoring right over the wireless LAN. New Crestron SIP phone allows 2-way
communication between touchpanels as well as with traditional PSTN (public
switched telephone network) telephones and other SIP/VoIP phones.
NOTE: SIP Phone requires a high speed LAN and/or broadband connection and a
connection to a SIP server or SIP-based Internet phone (VoIP) service provider.
Li-Ion Rechargeable Batteries
A field-replaceable Lithium Ion battery pack onboard the TPMC-8X provides fast
charging, long lasting wireless operation without the “memory” issues typical of
other rechargeable batteries. An external “booster” battery pack is also available,
providing up to 20 hours of typical use between charges. The optional external
battery pack clips neatly to the rear of the touchpanel without tools, adding 0.75 inch
(19 mm) depth and non-slip rubber feet resulting in a fixed tilt angle of 7 degrees.
Docking Station Options
Optional desktop or wall mount docking stations afford a choice of convenient
charging solutions, adding 10/100 Ethernet for direct connection to a wired LAN,
plus two USB ports for mouse and keyboard. The desktop dock allows the
touchpanel to be operated at a 37 degree angle, while the wall mount model provides
a secure, flush look.
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •3

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Specifications
Specifications for the TPMC-8X are listed in the following table.
TPMC-8X Specifications
SPECIFICATION DETAILS
Touchscreen Display
Display Type TFT active matrix color LCD
Size 8.4 inch (21.3 cm) diagonal
Aspect Ratio 4:3 SVGA
Resolution 800 x 600 pixels
Brightness 200 nits
Contrast 500:1
Color Depth 18-bit, 262k colors
Illumination Edgelit fluorescent
Viewing Angle1±65º horizontal, +65º/-45º vertical
Touchscreen Resistive membrane
Memory
DDR SDRAM 512 MB
Flash 1 GB
Compact Flash Accepts up to 4 GB Type II CF
(not included)
Maximum Project Size 190 MB
Operating System Microsoft®Windows®XP Embedded
Graphic Engine Isys i/O engine, 16-bit non-palette graphics;
65,536 colors; Synapse image rendering
algorithm; multi-mode objects; DNav
dynamic menu objects; dynamic graphics2;
Windows®SideShow®support, PNG
translucency; full motion (60 fps) animation;
transition effects
Embedded PC Applications3Microsoft Internet Explorer w/Macromedia®
Flash®plug-in, Windows Media®Player,
RealPlayer®, Crestron MJPEG viewer,
Crestron IP Intercom, Crestron SIP Phone,
NetMeeting®, VNC viewer4, Remote
Desktop, Java™ Runtime, Crestron
Keyboard, Adobe®Acrobat®Reader,
WordPad, MS Word Viewer 2003, Excel®
Viewer 2003, PowerPoint®Viewer 2003
RF Wireless3
RF Transceiver IEEE 802.11a/b/g WiFi, 5.8 or 2.4 GHz
2-way RF, static IP or dynamic IP via
DHCP, 64 and 128-bit WEP encryption
Range 30 feet (10 meters) @ 54 Mbps; range and
speed vary based upon environmental
conditions
(Continued on following page)
4 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
TPMC-8X Specifications (Continued)
SPECIFICATION DETAILS
RF Wireless (Continued)
Gateway Requires a CEN-WAP-ABG or similar
802.11a/b/g wireless access point and
Ethernet enabled Crestron 2-Series control
system
Ethernet510BASE-T/100BASE-TX, auto-switching,
auto-negotiating, auto-discovery, full/half
duplex, TCP/IP, UDP/IP, DHCP, IEEE
802.3U compliant
Video
Streaming/File Formats MPEG4 and MJPEG via Axis Media Control
or Crestron MJPEG Viewer, plus all formats
supported by the embedded media player
applications3
Audio
Hardware Features Dual onboard microphones, built-in stereo
speakers, stereo headphone output
Streaming/File Formats As supported by the embedded media
player applications3
Audio Feedback (WAV) 8 & 16 bit PCM, mono & stereo,
8 – 44.1 kHz sampling rates
Amplification Stereo, 1.1 Watts per channel
Battery
Internal Battery Lithium Ion, 7.4 Volt, 2200 mAh, Crestron
model TPMC-8X-BTP included
Usage per Charge6~1.5 hours continuous, 9+ hours under
normal use with standby/power down
activated
Charging Time ~2 hours (~2.5 - 3 hours when in use)
Power Requirements
Touchpanel 42 Watts (3.5 Amps @ 12 Volts DC)
Universal Power
Supply/Charger (included)
100~240 VAC 50/60 Hz
Default IP ID703
Minimum 2-Series Control
System Update File8, 9
Version 3.137 or later
Environmental
Operating Temperature 32º to 104ºF (0º to 40ºC)
Storage Temperature 14º to 140ºF (-10º to 60ºC)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 143 BTU/Hr
Enclosure Magnesium alloy case with plastic buttons,
stylus storage slot (stylus included), integral
docking station port
(Continued on following page)
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •5

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
TPMC-8X Specifications (Continued)
SPECIFICATION DETAILS
Dimensions
Height 8.21 in (20.85 cm)
Width 9.69 in (24.60 cm)
Depth 0.92 in (2.32 cm)
Weight (with internal battery) 2.0 lbs (0.9 kg)
Included Accessories
TPMC-8X-BTP Internal Battery Pack
Available Accessories
CEN-WAP-ABG-1G Wall Mount 802.11a/b/g Wireless Access
Point
CEN-WAP-ABG-CM Ceiling Mount 802.11a/b/g Wireless Access
Point
TPMC-8X-BTPE External Battery Pack
TPMC-8X-DS Desktop Docking Station/Charger
TPMC-8X-DSW Wall Mount Docking Station/Charger
1. Optimum viewing angle for best contrast is 37º.
2. By design, the panel will not load dynamic graphics if they are located on a password protected FTP
or HTTP server.
3. Refer to website or contact Crestron for a current list of compatible devices and embedded
applications. To ensure reliable performance, new device drivers and applications are available only
from Crestron through firmware updates.
4. The supported VNC viewer is UltraVNC version 1.0.2. Other VNC viewers may work but are not
guaranteed.
5. Requires a wired connection via docking station.
6. Up to 3.5 hours continuous, 20+ hours under normal use with standby/power down activated, when
using external battery pack option, with screen brightness set to 65%, standby set to 1 minute, power
down set to 2 minutes, waking the panel five time per hour. Actual usage can vary depending on your
settings.
7. Refer to “Identity Code” on page 12 for details.
8. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
9. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
6 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Physical Description
This section provides information on the connections, controls and indicators
available on your TPMC-8X.
TPMC-8X Physical View
TPMC-8X Physical View (on optional TPMC-8X-DS Desktop Docking Station/Charger)
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •7

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
TPMC-8X Overall Dimensions (shown with optional TPMC-8X-BTPE External Battery Pack attached)
9.69 in
(24.60 cm)
8.21 in
(20.85 cm)
1 2
3 4 5
8
7
6
1.67 in
(4.24 cm)
0.92 in
(2.32 cm)
9
13
14
1211
10
8 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 STYLUS
Used to “tap” or to do “select and drag” functions
just as you would using a mouse;
Also used to “type” on the input panel “keyboard”
when entering text or commands
2 MEMORY CARD (1) Type II CF+ card slot1
3 POWER LED
(1) Green LED, indicates touchpanel power
status
4 BATTERY LED (1) Green/yellow dual color LED, indicates
battery condition and charging status;
When AC is offline and the external battery is
connected, the panel will use the external battery
before using the internal battery and the LED will
remain solid green; Once the internal battery is in
use, the LED will remain solid green if battery
level is above 25% (±3%) of full charge, solid
yellow if charge drops to 25% (±3%) and blinking
yellow if battery level drops to 10% (±3%); When
AC is online and battery is charging, the LED will
be blinking green until charge is 100%
5 WIFI LED
(1) Green LED, indicates wireless network
connection status:
Solid green – communicating with a wireless
access point (WAP)
Blinking green – searching for a WAP
Off – no wireless communication (unit is in power
down mode or power is off)
6 POWER BUTTON (1) Pushbutton, initiates “Power On” and Power
Down”:
Press to turn touchpanel power on; Press again
to put panel in power down mode; Press to
restore full on mode; Press and hold for four
seconds to turn power off (The recommended
method for shutting down the touchpanel is to
press the Shut Down button on the setup menu.)
7 THUMBPAD &
ARROWS2
(1) programmable 5-way thumbpad (4-way
navigation plus center “Enter” button) and (2)
programmable up/down pushbuttons
8 HEADPHONES
(1) 3.5 mm TRS mini phone jack;
Stereo headphone output;
Output power: 12 mW per channel;
Minimum impedance: 32 Ω
9 BATTERY
SWITCH
(1) Recessed slide switch inside battery
compartment, shuts off battery for long term
storage; refer to “Internal Battery Switch” on page
12
(Continued on following page)
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •9

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Connectors, Controls & Indicators (Continued)
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
10 USB
1
2
3
4
(1) USB Type A female;
USB 2.0 port for keyboard, mouse and
storage devices1, 3
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
11 HARD KEYS (4) Programmable pushbuttons below
touchscreen
12 BIOMETRIC
SCANNER
AuthenTec EntraPad®1610 fingerprint scanner;
identifies up to 30 users by fingerprint
13 12V 3.5A
(1) 2.5 mm barrel DC power jack;
12 Volt DC power input (power supply included);
Power pack can also be used to charge internal
battery
14 DOCKING
STATION
CONNECTOR
Mates with TPMC-8X-DS or
TPMC-8X-DSW Docking Station/Charger
(sold separately)
1. Refer to website or contact Crestron for a current list of compatible devices and embedded
applications. To ensure reliable performance, new device drivers and applications are available only
from Crestron through firmware updates.
2. For programming details, refer to “Hard Buttons” on page 32.
3. Only generic USB devices (i.e. simple keyboard, mouse and external storage) should be used with the
TPMC-8X. Any complex USB devices (e.g. a storage device with a built-in fingerprint scanner) will
not have the proper support on the panel.
10 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Industry Compliance
As of the date of manufacture, the TPMC-8X has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
Federal Communications Commission (FCC) Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •11

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Setup
Identity Code
The IP ID is set within the TPMC-8X’s table using Crestron Toolbox™. For
information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs
of multiple TPMC-8X devices in the same system must be unique.
When setting the IP ID, consider the following:
• The IP ID of each unit must match an IP ID specified in the SIMPL™
Windows program.
• Each device using IP to communicate with a control system must have a
unique IP ID.
Internal Battery Switch
The TPMC-8X comes with a TPMC-8X-BTP Internal Battery Pack installed. To
prevent internal battery drain during shipment or long-term storage, the
TPMC-8X has a battery switch inside the battery compartment. To use the internal
battery, remove the battery compartment cover by first removing the two screws that
attach it to the back of the touchpanel. Move the switch to the up (on) position and
re-attach the battery compartment cover.
To conserve internal battery power when the unit will not be used for extended
periods, move the switch to the down (off) position.
NOTE: The internal battery can still be charged with the switch in the off position.
TPMC-8X Internal Battery Switch
12 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
Configuring the Touchpanel
NOTE: The only connection required to configure the touchpanel is power
(supplied from the internal battery, external battery or the included power pack).
The TPMC-8X is configured from the setup menu.
NOTE: If no project has been loaded or if an invalid project has been loaded, the
touchpanel displays an error message and defaults to the setup menu screen.
If a project is running, the setup menu can be accessed using one of three methods.
Via the Hard Keys Press the four hard keys at the bottom of the touchpanel in sequence, from left to
right and again from left to right (i.e. press 1, 2, 3, 4, 1, 2, 3, 4) within a 10 second
period.
Via USB Keyboard 1. Attach a USB keyboard (refer to “Hardware Hookup” on page 47 for
details).
2. Open the “Validate User Account Info” window (shown below) by pressing
Ctrl+Alt+Shift on the keyboard.
“Validate User Account Info” Window
3. Enter the user account tpmcadmin, and the password tpmcadmin and touch
Validate.
NOTE: The password is case sensitive. After logging in, the password can be
changed from the “Security” window. Refer to “Security” on page 15 for more
information.
4. When the “TPMC-8X Debug Output” window appears (shown below),
select Project | Enter Setup Mode to enter the setup menu (refer to “Setup
Menu Details” which starts on page 15).
“TPMC-8X Debug Output” Window
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •13

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Via Crestron Toolbox 1. Establish communication with the touchpanel (refer to “Establishing
Communication” on page 58 for details).
2. Right-click on the device and select Functions | Setup Mode….
“Setup/Calibrate” Window
3. Select Enter Setup Mode. The setup menu will be displayed as shown in
the following diagram.
NOTE: Select Exit Setup Mode to exit the setup menu.
TPMC-8X Setup Menu
NOTE: Another way to enter the setup menu (after a project has been loaded) is to
touch the screen during boot up when you see the “Preparing to Load Project”
message. Maintain touch until after the countdown, when the message will change to
“Loading Setup Screen”.
14 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C

Crestron TPMC-8X Isys i/O®8.4” WiFi Touchpanel
The setup menu provides access to all basic functions and parameters. It is divided
into Setup, Ethernet, Battery, Standby, Power Down, Screen Brightness, WiFi Status
and Docking Station Status sections. There are also buttons for Install, Save &
Reboot, Shut Down and Exit.
NOTE: To allow the touchpanel to upload projects, standby is disabled until
approximately five minutes after the project is loaded.
NOTE: The Install button is reserved for future applications.
To exit the setup menu and return to the program, touch Exit, located at the bottom
of the setup menu. To save any changes and reboot the touchpanel, touch Save &
Reboot, located at the bottom of the setup menu. Use the Shut Down button to turn
off the touchpanel.
Setup Menu Details
The setup menu allows configuration of the touchpanel’s settings for security, touch
screen calibration, runtime project, audio, embedded applications, diagnostics and
hard button programming. The setup menu also has a button that will toggle the on-
screen keyboard on and off.
Security
The Security button opens the “Security Setup” window, which allows the user to
change the username and password of the system account, setup and close network
connections and clear cookies.
NOTE: To use the on-screen keyboard for security settings, touch Keyboard on the
setup menu before touching Security.
“Security Setup” Window
Operations Guide – DOC. 6539C Isys i/O®8.4” WiFi Touchpanel: TPMC-8X •15

Isys i/O®8.4” WiFi Touchpanel Crestron TPMC-8X
Touch Setup Connections… to open the “Network Connections” window. This
window is used to map to a network drive. A mapped network drive permits easy
access to embedded application files (Word, Excel, PowerPoint, etc.) and provides a
location to save files. To further customize the installation, network drives
containing compiled touchpanel project files can also be mapped.
“Network Connections” Window
To add a new network connection, touch Add.
“Configure Network Connection” Window
To add a network drive, touch to browse for the new network connection.
1. Map this connection by selecting a drive letter from the Map Drive Letter
drop box.
2. Enter a User Name and Password.
3. Touch the Remember and reconnect on startup checkbox if so desired.
4. Touch OK to enable the new network connection and return to the
“Network Connections” window.
Once all changes to network connections have been completed, touch OK to return
to the “Security Setup” window.
The Certificates button can be used to install or uninstall certificates used for server
and/or user authentication when making a secure connection (for example, to a
secured wireless access point). In order to use certificates, the TPMC-8X Security
16 •Isys i/O®8.4” WiFi Touchpanel: TPMC-8X Operations Guide – DOC. 6539C