Crestron TSW-770-GV User manual

The Crestron® TSW-770-GV and TSW-1070-GV are wall mount touch
screens that feature web browsing, Smart Graphics® software and
HTML5 UItechnology, custom-programmable virtual buttons,
H.265/H.264 streaming video, and PoE+(Power over Ethernet
Plus)network power. The touch screens also provide built-in applications
for room scheduling, conferencing, and home control.
The TSW-770-GV and TSW-1070-GV are modified versions of the
TSW-770 and TSW-1070 series touch screens, which eliminate the
microphone, the Bluetooth® communications beacon, and Wi-Fi® network
connectivity to comply with government applications demanding extra
privacy and security.
NOTE:The TSW-770-GVand TSW-1070-GV are functionally similar.
For simplicity within this guide, the term "touch screen"is used except
where otherwise noted.
In the Box
1TSW-770-GVor TSW-1070-GV*, Wall Mount Touch Screens
Additional Items
1 Bracket, Mounting (2055453)
4 Screw, 6-32 x 3/4 in., Undercut Head, Phillips (2033247)
4 Screw, M3 x 16 mm, Flat Head,Phillips (2013788)
2 Screw, M3.5 x 25 mm, Flat Head,Phillips (2023756)
1 Bracket, Security (2055451)
2 Screw, M2 x 0.4 mm, Security (2055454)
1 Key, Security BracketRelease (2055452)
*Refer to the TSW-770-GV-B-S and TSW-1070-GV-B-S product pages at
www.crestron.com for a complete list of color variations.
Install the Mounting Bracket
The TSW-770-GV and TSW-1070-GVinstall over a standard 2-gang or
3-gang U.S. electrical box, a 2-gang European electrical box, or a 2-gang
U.K. electrical box.
NOTES:
lAdditional mounting options are possible using the following
mounting accessories. For more information, refer to the product
pages at www.crestron.com.
oTSW-UMB-70 universal mounting bracket
oTSW-UMB-70-PMK preconstruction mounting kit
oTSW-UMB-70-BBI wall mount back box
oTSW-770/1070-MSMK series multisurface mounting kits
oTS-770/1070-MUMK mullion mounting kit
oTSW-770/1070-RMB series retrofit mounting brackets
oTSW-770/1070-RMK series rack mount kits
lInstalling the mounting bracket to an electrical box is required only if
one of the mounting solutions above is not used. Refer to the
mounting solution documentation at www.crestron.com/manuals.
To mount the touch screen into an electrical box, use the appropriate
screws (four 6-32x 3/4in. screws, four M3x16mm screws, or two
M3.5x25 mm screws) to attach the mounting bracket to the electrical
box as shown in the following illustrations:
NOTE:For U.S. installations, use a #2 Phillips screwdriver. For European
or U.K. installations, use a #1 Phillips screwdriver.
1
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

lFor U.S. installations, use the four 6-32x 3/4in. screws.
lFor European installations, use the four M3x16mm screws.
lFor U.K. installations(not pictured), use the two M3.5x25 mm screws
to attach the mounting bracket to the electrical box. Insert the screws
through the center openings in the left and right sides of the mounting
bracket.
Install the Security Bracket (Optional)
The included security bracket may be attached to the touch screen to
prevent unauthorized removal after installation. The security bracket
snaps into place behind the mounting bracket so that the touch screen
cannot be removed without using the included metal prong.
Use the two M2 x 0.4 mm screws to attach the security bracket to the
touch screen rear housing as shown in the following illustration.
2
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

To remove the touch screen after installation, use the included release key
to push down on the security bracket release tabs as shown in the
following illustration while gently pulling the touch screen away from the
mounting bracket. Connect the Touch Screen
Route all necessary cables through the rear of the mounting bracket, and
then make connections to the side of the touch screen rear housing.
Observe the following when connecting the touch screen:
lPower and data connection is provided to the touch screen by a single
Ethernet cable. A Crestron PoE (Power over Ethernet) power supply,
such as the PWE-4803RU, or a PoE-capable network switch is
recommended (both not included).
lThe USB ports are used to connect compatible Crestron LED
accessories to the touch screen.
NOTE: The TSW-770-GV may use either PoE or PoE+ to supply
power to compatible LED accessories over USB; the TSW-1070-GV
must use only PoE+ to supply power to LED accessories over USB.
lApply power after all connections have been made.
3
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Mount the Touch Screen
After all connections have been made, push the touch screen gently into
the mounting bracket so that its rear housing is secured within the center
opening within the mounting bracket.
If the touch screen is not level after installation, pull it out of the mounting
bracket and loosen the screws holding the bracket into place. This
procedure allows the mounting bracket to be rotated slightly.
Once the mounting bracket has been repositioned, retighten the screws,
reinstall the touch screen into the bracket, and ensure that the touch
screen is now level.
NOTE:To clean or disinfect a touch screen display, use a soft, clean,
damp (not wet) cloth with any commercially available non-ammonia
glass cleaner or disinfectant cleaner. Bezels do not provide a complete
watertight seal, so apply cleaning solution to the cloth rather than the
surface of the touch screen. Wipe the touch screen clean and avoid
ingress of moisture beneath the bezels.
Configure the Touch Screen
When power is applied for the first time, the following screen is displayed.
The touch screen may take up to two minutes to boot.
4
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Touch the screen to display the main Setup screen (TSW-1070 shown).
Device settings for the touch screen may be configured using the built-in
setup screens or the web configuration interface. For more information
on configuring the touch screen, refer to the TSW-570, TSW-770, and
TSW-1070 Product Manual (Doc.8550).
Access the Device Setup Screens
To access the built-in setup screens, place five fingers on the display and
hold for 15 seconds.
Use the setup screens to configure various settings for the touch screen,
including Ethernet setup, IP table setup, audio setup, display setup,
standby timeout, application selection, diagnostics, and the virtual
toolbar.
Access the WebConfiguration Interface
The touch screen provides a web configuration interface that is used to
view and configure various touch screen settings and to select an
application. The interface can be accessed using the touch screen IP
address or the XiO Cloud® service.
Touch Screen IPAddress
To access the web configuration interface using the touch screen IP
address:
1. Ensure that the touch screen is connected to the network.
2. Use the Device Discovery tool in Crestron Toolbox™ software to
discover the touch screen and its IP address on the network.
3. Enter the control system IPaddress into a web browser.
XiOCloud Service
The XiO Cloud service allows supported Crestron devices across an
enterprise to be managed and configured from one central and secure
location in the cloud. Supported devices are configured to connect to the
service. Use of the service requires a registered XiOCloud account.
NOTE:The device may be disconnected from the service by navigating to
the Cloud Services tab in Crestron Toolbox software (Functions >
Device Info >Cloud Services). For details, refer to the Crestron Toolbox
help file.
5
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

To access the web configuration interface using the XiOCloud service:
1. Record the MAC address and serial number that are labeled on the
shipping box or rear panel of the device. The MAC address and serial
number are required to add the device to the service.
2. Do either of the following:
lFor existing accounts, access the XiO Cloud service at
https://portal.crestron.io.
lFor new accounts, register for a XiO Cloud account at
www.crestron.com/xio-cloud-registration.
3. Claim the device to the service as described in the XiO Cloud User
Guide (Doc. 8214).
4. Select the device from the cloud interface to view its settings.
Set the Time Zone
The time zone must be set on the touch screen if it will not be paired with
a control system IPtable.
To set the time zone:
1. Access the web configuration interface using either the touch screen
IP address or the XiO Cloud service.
2. Select the Settings tab.
3. Navigate to System Setup >Time/Date.
4. Select the time zone where the touch screen will be used from the Time
Zone drop-down menu.
5. Click Save Changes on the top right of the screen.
Create an AdminAccount
The first time the web configuration interface is accessed, a dialog box is
displayed asking the user to create an admin account. A similar message
is displayed when connecting to the device in Crestron Toolbox software if
an admin account has not already been created.
To create an admin account:
1. Enter a username and password for the admin account in the
appropriate text fields.
CAUTION:Do not lose the username and password for the admin
account, as the device must be reset to factory settings to regain
access.
2. Click OK. A dialog box is displayed stating that enabling authentication
will restart the web session.
3. Click Yes to confirm and restart. The username and password created
in step 1 must be entered to regain access to the web configuration
interface.
NOTE:The username and password must also be entered when
connecting to CrestronToolbox or XPanel.
6
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Select an Application
The touch screen ships with various built-in applications. An application
may be selected from the default project that ships with the touch screen.
NOTE:Applications can be selected and configured from the device
setup screens or from the web configuration interface at any time. For
more information, refer to the TSW-570, TSW-770, and TSW-1070
Product Manual (Doc.8550).
To select a touch screen application:
1. Tap Touch Here to Enable a Specific Application on the device splash
screen. Refer to the first image in Configure the Touch Screen.
2. Select the desired touch screen application from the Choose
Application Below menu that is displayed.
3. Click Confirm. The touch screen reboots to display the user interface
for the selected application.
If a custom user project will be used, tap User Project. Custom user
projects can be uploaded using the web configuration interface or
Crestron Toolbox software.
Visit the Product Pages
Scan the QR code to visit the product page.
TSW-770-GV
www.crestron.com/model/6510826
TSW-1070-GV
www.crestron.com/model/6510827
7
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version

Additional Information
Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.
Crestron product development software is licensed to Crestron dealers and Crestron
Service Providers (CSPs) under a limited nonexclusive, nontransferable Software
Development Tools License Agreement. Crestron product operating system software is
licensed to Crestron dealers, CSPs, and end-users under a separate End-User License
Agreement. Both of these Agreements can be found on the Crestron website at
www.crestron.com/legal/software_license_agreement.
The product warranty can be found at www.crestron.com/warranty.
The specific patents that cover Crestron products are listed at
www.crestron.com/legal/patents.
Certain Crestron products contain open source software. For specific information, visit
www.crestron.com/opensource.
Crestron, the Crestron logo, Crestron Toolbox, Crestron XiO Cloud, Rava, and Smart
Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc. in
the United States and/or other countries. Bluetooth is either a trademark or registered
trademark of Bluetooth SIG, Inc. in the United States and/or other countries. Wi-Fi is
either a trademark or registered trademark of Wi-Fi Alliance in the United States
and/or other countries. Other trademarks, registered trademarks, and trade names may
be used in this document to refer to either the entities claiming the marks and names or
their products. Crestron disclaims any proprietary interest in the marks and names of
others. Crestron is not responsible for errors in typography or photography.
©2020 Crestron Electronics, Inc.
Doc ID 8775A
07/28/20
8
TSW-770-GV and TSW-1070-GV QuickStart
7 in. and 10.1 in. Wall Mount Touch Screens, Government Version