Crestron Isys TPS-6L How to use

Crestron TPS-6L
Isys®5.7” Wall Mount Touchpanel
Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
Contents
Isys®5.7” Wall Mount Touchpanel: TPS-6L 1
Introduction ..........................................................................................................1
Features and Functions...........................................................................1
Applications ...........................................................................................3
Internal Block Diagram..........................................................................4
Specifications .........................................................................................4
Physical Description...............................................................................7
Industry Compliance ............................................................................11
Setup...................................................................................................................12
Network Wiring ...................................................................................12
Identity Code........................................................................................12
Configuring the Touchpanel.................................................................13
Mounting Options ................................................................................29
Touchpanel Mounting ..........................................................................30
Touchpanel Removal ...........................................................................34
Hardware Hookup ................................................................................34
Recommended Cleaning ......................................................................35
Programming Software.......................................................................................36
Earliest Version Software Requirements for the PC ............................36
Programming with Crestron SystemBuilder ........................................36
Programming with D3 Pro ...................................................................36
Programming with SIMPL Windows...................................................36
Programming with VisionTools Pro-e .................................................39
Example Program.................................................................................42
Uploading and Upgrading ..................................................................................43
Establishing Communication ...............................................................43
Programs, Projects and Firmware ........................................................44
Program Checks ...................................................................................44
Problem Solving .................................................................................................45
Troubleshooting ...................................................................................45
Check Network Wiring ........................................................................46
Reference Documents ..........................................................................47
Further Inquiries...................................................................................47
Future Updates .....................................................................................47
Software License Agreement..............................................................................48
Return and Warranty Policies.............................................................................50
Merchandise Returns / Repair Service .................................................50
CRESTRON Limited Warranty ...........................................................50
Operations & Installation Guide – DOC. 6630A Contents •i

Crestron TPS-6L Isys®5.7-Inch Wall Mount Touchpanel
Isys®5.7” Wall Mount
Touchpanel: TPS-6L
Introduction
Features and Functions
This guide describes multiple models; differences are noted where applicable.
• 5.7" active matrix color touchscreen display
• 16-bit Isys®graphics | 640 x 480 resolution
• Synapse™ image rendering algorithm
• Single full motion, fully scalable video window
• Amplified speaker (optional) and microphone
• Includes faceplate with 12 “hard key” pushbuttons
• Button engraving available as solid or backlit text
• No-button blank faceplate also provided
• WAV file audio feedback
• Built-in light sensor
• Crestron Home®CAT5 AV connectivity
• High speed Ethernet and Cresnet®communications
• Wall, lectern and rack mounting options
• Available in almond, black or white
The Isys®TPS-6L Wall Mount Touchpanel delivers high end style and performance
in a compact, cost effective flush mount design. Featuring a bright, beautiful, high-
contrast 5.7" color touchscreen with 16-bit Isys graphics, 640 x 480 resolution and
single video window display, the TPS-6L delivers a world of control capability yet
leaves a very small footprint. The addition of 12 optional pushbuttons provides quick
access to commonly used functions.
Crestron®touchpanels offer an ideal user interface for controlling everything from
basic audio distribution and lighting to complete home automation and multimedia
presentation, providing a wide open canvas for the creation of custom control screens
perfectly tailored to the needs of the end user. Touchpanels do away with piles of
remote controls, cryptic front panels and cluttered wall switches, affording true "one
touch" control over a broad range of complex devices and systems.
Operations & Installation Guide – DOC. 6630A Isys® 5.7” Wall Mount Touchpanel: TPS-6L •1

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
Isys®
Isys power and beauty are infused throughout Crestron’s entire touchpanel lineup.
Under the hood, the Isys engine combines a 32-bit Freescale ColdFire®
microprocessor with an ingenious and ultra efficient operating system to produce
astonishing full color graphics and high res images with lightning fast performance.
Capabilities include dynamic graphics and text, full motion animations, multimode
objects and PNG translucency.
Synapse™
Crestron’s exclusive Synapse Image Rendering Algorithm enables system
programmers to produce amazing graphics - faster and easier. Advanced antialiasing
delivers crisper, sharper objects and text. Enhanced 3D effects add new depth and
style. And because Synapse is native to the touchpanel, memory requirements and
upload time are substantially reduced.
Full Motion Video
The TPS-6L can display full motion video from an external source, providing an
exceptional utility for viewing security cameras and other video signals on the
touchscreen display. The video image is fully scalable for viewing in any sized
window or full screen. The choice of balanced or unbalanced composite inputs
allows compatibility with both conventional coaxial and Crestron Home®Balanced
AV distribution systems.
Audio Features
Customized WAV audio files can be loaded on the touchpanel to add dimension to
its touchscreen graphics using personalized sounds, button feedback and voice
prompts. An external speaker option can be added for amplification of external AV
sources and to support programmable intercom functionality in combination with the
built-in microphone.
Crestron Home®CAT5 AV
The TPS-6L is ideal for use with AV distribution and intercom systems of all sizes.
Its balanced audio and video connections make installation easy and affordable using
inexpensive CAT5 type wire and Crestron's popular CH CAT5 Balanced AV
distribution switchers. A single balanced video input accepts signals from composite
video sources over wiring distances of up to 750 feet, while balanced audio
connections are included to accept incoming stereo program audio and intercom
signals and to output audio from the internal microphone. Connection to
conventional coaxial video and audio systems is also supported.
Pushbutton Options
The TPS-6L features a faceplate (bezel) containing 12 programmable “hard key”
pushbuttons, elegantly trimmed by illuminated button dividers. Integral to the
faceplate, the pushbuttons are positioned along the left and right edges of the
touchscreen, making it possible to align dynamically changing text and graphics on
screen beside the pushbuttons to support context sensitive menu functions such as
digital media titles, channels or lighting presets. Custom engraving of the buttons is
available, with a choice of solid or backlit text. A plain, no-button faceplate is also
included, allowing a very clean appearance with no pushbuttons.
2 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
Light Sensor
A light sensor is built into the TPS-6L to automatically adjust the display brightness
for optimal visibility under varying light conditions.
High Speed Connectivity
Both Cresnet®and high speed Ethernet are standard on the TPS-6L, providing for
easy network integration and seamless communications with Crestron control
systems.
Versatile Flush Mount Design
The TPS-6L is designed for easy flush mount installation in a wall, lectern or similar
flat surface. Mounting clips furnished with the TPS-6L facilitate a clean installation
in drywall and many furniture applications. Additional mounting options are
available separately including optional back box and 19” rack mount kit.
Applications
The following diagram shows a TPS-6L in a basic AV application.
TPS-6L Application Diagram
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •3

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
Internal Block Diagram
The following diagram represents the basic operation of the TPS-6L.
TPS-6L Internal Block Diagram
Specifications
Specifications for the TPS-6L are listed in the following table.
TPS-6L Specifications
SPECIFICATION DETAILS
Touchscreen Display
Display Type TFT Active matrix color LCD
Size 5.7 inch (14.48 cm) diagonal
Aspect Ratio 4:3 VGA
Resolution 640 x 480 pixels
Brightness 400 nits
Contrast 400:1
Color Depth 18-bit, 256 k colors
Illumination Backlit fluorescent
(Continued on following page)
4 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
TPS-6L Specifications (Continued)
SPECIFICATION DETAILS
Touchscreen Display (Continued)
Viewing Angle ±80º horizontal, +80º/-70º vertical
Touchscreen Resistive membrane
Processor
CPU 32-bit Freescale ColdFire®Microprocessor
Memory
SDRAM 32 MB
Flash 32 MB
Maximum Project Size 28 MB
Graphic Engine Isys engine; 16-bit non-palette graphics;
65536 colors; Synapse image rendering
algorithm; multi-mode objects; dynamic
graphics1; PNG translucency, full motion
(60 fps) animation; color key video windowing
Ethernet 10BaseT/100BaseTX, auto switching,
auto-negotiating, autodiscovery, full/half
duplex, TCP/IP, UDP/IP, CIP, DHCP, IEEE
802.3U compliant
Video
Signal Types Composite
Formats NTSC 480i or PAL 576i
Color Depth 18-bit, 262,144 colors
Windowing Single window, deinterlaced and scalable up
to full screen
Audio
Hardware Features Built-in microphone, internal speaker for
WAV/keyclick, optional amplified speaker for
program/intercom, internal volume & tone
control
Audio Feedback (WAV) 8-bit, PCM, mono, 8 kHz sampling rate
Amplification 0.75 Watt for internal WAV/keyclick speaker,
6 Watts for optional program/intercom
speaker (requires SPK-6L speaker kit, sold
separately)
Power Requirements
Cresnet Power Usage 15 Watts (0.625 Amp @ 24 Volts DC)
Default Net ID 03
Minimum 2-Series Control
System Update File2, 3
Version 3.137 or later
Environmental
Temperature 32º to 104ºF (0º to 40ºC)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 51 BTU/Hr
(Continued on following page)
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •5

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
TPS-6L Specifications (Continued)
SPECIFICATION DETAILS
Enclosure
Construction Injection molded plastic, flush mountable
using (4) clips provided (additional mounting
kits available)
Faceplate Injection molded plastic, button and no-button
faceplates included, optional solid or backlit
engraving sold separately
Dimensions
Height 5.60 in (14.23 cm)
Width 7.40 in (18.80 cm)
Depth 2.28 in (5.78 cm)
3.58 in (9.08 cm) with SPK-6L speaker kit
(sold separately)
Weight 1.52 lbs (0.69 kg)
Available Models
TPS-6LA-T Isys 5.7” Wall Mount Touchpanel, Almond,
Textured
TPS-6LB-T Isys 5.7” Wall Mount Touchpanel, Black,
Textured
TPS-6LW-T Isys 5.7” Wall Mount Touchpanel, White,
Textured
Included Accessories
TPS-6L-FP(A,B,W)-T Button Faceplate w/o Engraving
(specify color)
TPS-6L-FP(A,B,W)-T-NB No-Button Faceplate w/o Engraving (specify
color)
Available Accessories
SPK-6L Speaker Kit
TPS-6L-FP(A,B,W)-T Button Faceplate w/Custom Engraving
(specify color)
TPS-6L-FP-BKLT-(A,B,W)-T Backlit Button Faceplate w/Custom Engraving
(specify color)
TPS-6L-FP(A,B,W)-T-NB No-Button Faceplate w/Custom Engraving
(specify color)
BB-6L Pre-Construction Wall Mount Back Box
PMK-6L Pre-Construction Wall Mount Kit
TMK-6L Trim Ring
MMK-6L Mud Ring
WMKT-6L Lectern or Post-Construction Wall Mount Kit
with Trim Ring
WMKM-6L Post-Construction Wall Mount Kit
with Mud Ring
WMKB-6L Replacement Wall Mount Clips
RMK-6L Rack Mount Kit
CresCAT®D Crestron Home CAT5 Balanced AV Cable
1. The panel will not load dynamic graphics if they are located on a password protected HTTP server.
2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
6 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for Authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on your TPS-6L.
TPS-6L Physical View (with Button Bezel)
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •7

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
TPS-6L Dimensions – Front and Side View with Cutaway Showing Internal Controls
TPS-6L Dimensions and Connections – Rear View
8 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
Connectors, Controls & Indicators
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
1 BUTTONS
(12) Optional engravable pushbuttons with
available backlighting. A non-pushbutton
bezel is also provided if the buttons are not
desired. Refer to “Pushbutton Options” on
page 2 for additional details.
2 MICROPHONE (1) Built-in microphone behind the bezel
supports programmable intercom
functionality.
3 LIGHT SENSOR
Programmable photosensor for automatic
backlight dimming. Refer to “Auto Brightness
Control” on page 25 for additional information.
4 RESET BUTTON2(1) Miniature pushbutton behind faceplate,
used to reset the touchpanel.
5 LAN
GREEN
LED
YELLOW
LED
PIN 8
PIN 1
(1) 8-wire RJ-45 with two LED indicators;
10BaseT/100BaseTX Ethernet port;
Green LED indicates link status;
Yellow LED indicates Ethernet activity
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RC -
3 RC+ 7 N/C
4 N/C 8 N/C
6 NET
(1) Four-position terminal block connector for
data and power. Connects to Cresnet control
network.
Pin 1 (24) Power
Pin 2 (Y) Data
Pin 3 (Z) Data
Pin 4 (G) Ground
7 MIC OUT
(1) 3-pin 3.5mm detachable terminal block;
Balanced mono line level output;
Output impedance: 600 Ωbalanced,
300 Ωunbalanced;
Maximum output level: 2 Vrms balanced,
1 Vrms unbalanced
8 AUDIO INPUT
(1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced stereo (summed to
mono) line level input (requires SPK-6L
speaker kit, sold separately);
Input impedance: 10 kΩbalanced,
5 kΩunbalanced;
Maximum input level: 2 Vrms
balanced/unbalanced;
Normally connects to a Crestron CAT5
balanced audio source via CresCAT cable3;
Maximum CAT5 cable length: 1000 feet
(Continued on following page)
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •9

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
9 NTSC/PAL
INPUT
(1) 5-pin 3.5mm detachable terminal block;
Balanced (CAT5) or unbalanced (coaxial)
composite video inputs;
Formats: NTSC 480i or PAL 576i;
Input impedance: 100 Ωbalanced,
75 Ωunbalanced;
Input level: 1 Vp-p nominal;
Balanced input normally connects to a
Crestron CAT5 balanced video source via
CresCAT cable3;
Maximum CAT5 cable length: 750 feet
10 SPEAKER OPTION
(1) Six-pin (2x3) rectangular connector;
Connects to optional SPK-6L speaker kit
(sold separately).
1. Interface connectors for NET, MIC OUT,AUDIO INPUT, and NTSC/PAL INPUT ports are
provided with the unit.
2. To access the reset button, remove the bezel and then use a narrow blunt instrument such as the end of
a ballpoint pen to press the button.
3. For details on CAT5 wiring, refer to the latest version of the CAT5 Reference Guide (Doc. 6137),
which is available for download from the Crestron website (www.crestron.com/manuals).
CAUTION: Do not attempt to press the reset button by inserting a paperclip or
similar device through the small hole in the bezel. This could cause physical damage
to the microphone or the light sensor, or a short circuit on the printed circuit board
located in that area. Remove bezel to access the reset button.
10 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
Industry Compliance
As of the date of manufacture, the TPS-6L has been tested and found to comply with
specifications for CE marking and standards per EMC and Radiocommunications
Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •11

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
Setup
Network Wiring
When wiring the Cresnet®or Ethernet network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system (www.crestron.com/calculators).
Cresnet For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to maintain signal
quality.
For more details, refer to “Check Network Wiring” on page 46.
Ethernet The TPS-6L can also use high-speed Ethernet for communications between the
device and a control system, computer, digital media server and other IP-based
devices.
For information on connecting Ethernet devices in a Crestron system, refer to the
latest version of the Crestron e-ControlReference Guide (Doc. 6052), which is
available for download from the Crestron website (www.crestron.com/manuals).
Identity Code
Net ID The Net ID of the TPS-6L has been factory set to 03. The Net IDs of multiple
TPS-6L devices in the same system must be unique. The Net ID is set using the
internal setup menu (refer to “Interface Menu” which starts on page 15). The Net ID
may also be set from a personal computer (PC) via the Crestron Toolbox™ (refer to
“Establishing Communication” on page 43).
When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the SIMPL™
Windows®program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
IP ID The IP ID is set within the TPS-6L’s table using Crestron Toolbox. For information
on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs of multiple
TPS-6L devices in the same system must be unique.
When setting the IP ID, consider the following:
• The IP ID of each unit must match an IP ID specified in the SIMPL
Windows program.
• Each device using IP to communicate with a control system must have a
unique IP ID.
12 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
Configuring the Touchpanel
NOTE: The only connection required to configure the touchpanel is power. Refer to
“Hardware Hookup” which starts on page 34 for details.
To configure the unit, it may be necessary to access a series of setup screens prior to
viewing run-time screens that are loaded into the touchpanel for normal operation.
The MAIN MENU for configuring the touchpanel appears when a finger is held to
the touchscreen as power is applied, after the hardware reset button is pressed and
released or after touching the supplied opening screen. Refer to the following
illustration.
Opening Screen
Upon entering Setup Mode, the MAIN MENU, as shown in the following
illustration, displays four buttons: Touch Screen Calibration, Exit and Run
Program, Setup and Diagnostics.
After all setup procedures are completed, press Exit and Run Program to save the
information to EEPROM and exit Setup Mode.
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •13

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
MAIN MENU
Calibration Menu
Before beginning other setup procedures, it is advisable to perform screen
calibration. Press Touch Screen Calibration to display the CALIBRATION
MENU, as shown in the following illustration.
CALIBRATION MENU
Touch Perform Calibration. The message “Touch Upper Left” appears centered on
the panel with a cross hair in the upper left corner. Touch the center of the cross hair
in the corner of the screen to initiate calibration. Another message, “Touch Upper
Right”, appears with a cross hair in the correct corner. Touch the center of the cross
14 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A

Crestron TPS-6L Isys®5.7” Wall Mount Touchpanel
hair in the corner of the screen. A final message, “Touch Lower Right”, appears with
a cross hair in the correct corner. Touch the center of the cross hair in the corner of
the screen to conclude calibration and return to the MAIN MENU.
NOTE: When touching the screen during calibration, be as accurate as possible.
Use the tip of a capped pen or the eraser end of a pencil. To cancel calibration and
return to the MAIN MENU without saving calibration data, create a calibration error
by touching the screen in the same spot three times.
Setup Menu
To obtain the SETUP MENU, press the Setup button from the MAIN MENU. The
SETUP MENU offers a series of buttons that open additional menus and displays,
which are detailed in subsequent paragraphs. The SETUP MENU also provides a
series of buttons at the bottom that permit easy application of the backlit engraving
setting preset values. Refer to “Backlit Engraving Settings” which starts on page 23
for details.
After all setup parameters have been selected, select the Return button to return to
the MAIN MENU.
NOTE: For convenience, the current Cresnet ID setting is displayed in the upper
left corner.
NOTE: All touchpanel settings are automatically saved in non-volatile memory (on
exit from setup).
SETUP MENU
Interface Menu
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
Operations & Installation Guide – DOC. 6630A Isys®5.7” Wall Mount Touchpanel: TPS-6L •15

Isys® 5.7” Wall Mount Touchpanel Crestron TPS-6L
parameters, select the Interface button located on the SETUP MENU and display
the INTERFACE MENU, shown below.
The Cresnet network identity number (Cresnet ID also known as the Net ID) is
displayed on the INTERFACE MENU. Net ID is a two-digit hexadecimal number
that can range from 03 to FE and must correspond to the Net ID set in the SIMPL
Windows program of the Cresnet system. Matching IDs between touchpanel and
SIMPL Windows program is required if data is to be successfully transferred. The
Net ID for the TPS-6L is factory set to 03. No two devices in the same system can
have the same Net ID.
INTERFACE MENU
Each press of the Cresnet ID buttons, DOWN and UP, decreases and increases the
Net ID by one, respectively.
Use the other buttons on the screen to enable/disable the preferred communications
protocol: Ethernet, CIP (Crestron Internet Protocol), or Ethernet Autodiscovery.
The Ethernet Enable and Disable buttons determine the touchpanel’s ability to
communicate with other devices via Ethernet.
The CIP Enable and Disable buttons determine the touchpanel’s ability to
communicate with other Crestron devices using CIP. CIP must be enabled for the
touchpanel to communicate with other Crestron Ethernet devices.
The Ethernet Autodiscovery Enable and Disable buttons determine the touchpanel’s
ability to automatically locate other Ethernet devices on the network.
After the Cresnet ID setting has been verified and the communications protocol has
been selected, press Return to save the settings and return to the SETUP MENU.
Ethernet Menu
To set the Ethernet communication parameters, select the Ethernet button located on
the SETUP MENU and display the ETHERNET MENU, shown on the following
page.
16 •Isys®5.7” Wall Mount Touchpanel: TPS-6L Operations & Installation Guide - DOC. 6630A