Crivit 271528 User manual

Before reading, fold out the illustration page and get to know all
of the functions of your unit.
Dépliez la page avec les illustrations avant la lecture et informez-
vous ensuite au sujet des fonctions de l‘appareil.
Klap voor het lezen de pagina met de afbeeldingen open en
maak u vervolgens vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus
und machen Sie sich anschließend mit allen Funktionen des
Artikels vertraut.
IAN 271528
DELTA-SPORT HANDELSKONTOR GMBH
Wragekamp 6
D-22397 Hamburg
Version: 02/2016
Delta-Sport-Nr.: KH-2483
IAN 271528
KIDS’ SKATE HELMET
KIDS’ SKATE
HELMET
Instructions for use
KINDER
SKATEHELM
Gebruiksaanwijzing
CASQUE DE SKATE
ENFANT
Notice d’utilisation
KINDER-SKATE-
HELM
Gebrauchsanleitung

1
2
4
76
5
3
A C
D
B

5
Parts description
1. PC helmet shell
2. Ventilation holes
3. Rotary knob
4. Size adjustment system
5. Strap divider
6. Clip closure
7. Chin strap
Beschrijving onderdelen
1. Helmschaal uit PC
2. Ventilatieopeningen
3. Draaiwiel
4. Helm met maatverstelling
5. Riemverdeler
6. Klipsluiting
7. Kinriem
Désignation des pièces
1. Coque en polycarbonate
2. Ouvertures d‘aération
3. Molette
4. Système de réglage de la taille
5. Système de sangle
6. Clip de fermeture
7. Mentonnière
Teilebezeichnung
1. PC-Helmschale
2. Belüftungsöffnungen
3. Drehrad
4. Größenverstellsystem
5. Gurtverteiler
6. Clipverschluss
7. Kinnriemen

6
Congratulations!
With your purchase you have decided on a high-quality product.
Get to know the product before you start to use it. Carefully read the
following instructions for use. Use the product only as described and
only for the given areas of application.
Keep these instructions safe. When passing the product on to a third
party, always make sure that the documentation is included.
Important information
Please read the following instructions and information carefully
before using your new helmet for the first time. This helmet was
developed for use with skateboards, inline skates, roller skates and
similar groups, and manufactured according to state of the art.
Despite maximum safety standards, serious accidents may result in
injuries. In some cases, the impact may be so strong the helmet does
not effectively protect the rider from head injuries.
Compliance with the requirements according to Annex II of European
Directive 89/686/EEC (and subsequent amendments) as well as
those of harmonizing technical standard EN 1078 was certified by
the issuing authority TÜV Rheinland LGA Products GmbH, Tillystr. 2,
D-90431 Nürnberg, Germany, Notified Body No 0197.
Intended use
This product was manufactured for skateboarding, inline skating,
roller skating and similar groups. It is not suitable for other sports or
motorcycling.
GB/IE

7GB/IE
Safety notices
• Do not allow children to wear this helmet while climbing or playing
as this carries a risk of strangulation.
• The helmet must be firmly seated and the chin strap closed tightly.
• Do not shift the helmet toward the neck, as this will leave your
forehead unprotected.
• Do not wear headgear under the helmet.
• Be sure not to restrict air circulation.
• Never modify the helmet, its structure or the individual components.
• Never paint the helmet and/or apply decals or labels.
• The impacts of paint, decals, cleaning liquids or other solvents can
seriously impair the protection of the helmet.
• The helmet is intended to protect the head in the event of an
impact. This protection is no longer warranted after just one (even
minor) impact. The helmet must therefore immediately be replaced
following an accident, even without visible damage.
• Never use solvents or abrasive cleaners containing petroleum to
clean the helmet, neither inside nor outside. Always use a pH-
neutral detergent diluted in clear water; carefully rub with a soft
cloth. Then dry with a lint-free cloth. The padding may be cleaned
with a little soap, using a soft brush.
• Only use OEM replacement parts for your helmet.
• The life of this product varies by use. However, the product must
be replaced no later than five years from the date of manufacture
(Version: 02/2016).

8
HeiQ® Pure dynamiq
PURE Textile freshness
Experience the feeling of lasting freshness through the power of
silver, keeping you odour-free all day lang.
ADAPTIVE Thermal control
Feel good all over. The textile will cool you down when you’re hot,
and keep you dry longer in cold weather. Cools and minimises
perspiration.
Helmet sizing
• Measure the circumference of the head and select the helmet size
accordingly. Try several helmets before deciding. Ideally, the skin
over your temples moves along when wearing the helmet.
• Verify the helmet does not move much on your head even with chin
strap loose.
• The chin strap must be closed firmly for a secure seat. It is fitted
correctly when it is difficult to slide your fingers under the chin
straps. However, you must still be able to comfortably breathe,
swallow and turn your head.
• The helmet is seated correctly if it is tight, yet comfortable on your
head (Fig. B).
• If the helmet is too large (wiggles, cannot be adjusted tightly
enough) or too small (pinches, forehead exposed), please select
the next larger or smaller size.
• Never use the helmet if it cannot be adjusted correctly.
GB/IE

9
Adjusting the chin strap (Fig. C)
The general length of the chin strap can be adjusted with the loop.
You may also use the strap divider clip to adjust the length of the chin
strap. Please ensure that the strap divider does not bother you, the
straps do not cover your ears, and the fastener does not rest on your
chin.
Headband width adjustment (Fig. D)
Use the wheel for variable adjustment to your head size to ensure
the helmet is seated optimally. Turn the wheel clockwise to tighten the
headband and counter-clockwise to loosen the headband.
Maintenance and care
Regular maintenance and care contributes to ensuring the safety and
preservation of the helmet.
• Always use a pH-neutral detergent diluted in clear water; carefully
rub with a soft cloth. Then dry with a lint-free cloth.
• The padding may be cleaned with a little soap, using a soft brush.
Inner pads
• Hand wash below 30 °C.
30 °C/86 °F
• Allow to dry at room temperature.
GB/IE

10
Storage
Store the helmet in a dry, well ventilated location at room tempera-
ture when not in use. Avoid heat sources.
Disposal instructions
Please dispose of packaging and product in an environmentally
friendly manner! Dispose of product through an approved disposal
facility or through your local council. Please note the recycling regu-
lations in your area.
3 years warranty
The product was produced with great care and under constant
supervision. You receive a three-year warranty for this product from
the date of purchase. Please retain your receipt.
The warranty applies only to material and workmanship and does
not apply to misuse or improper handling. Your statutory rights,
especially the warranty rights, are not affected by this warranty.
With regard to complaints, please contact the following service
hotline or contact us by e-mail. Our service employees will advise
as to the subsequent procedure as quickly as possible. We will be
personally available to discuss the situation with you.
Any repairs under the warranty, statutory guarantees or through
goodwill do not extend the warranty period. This also applies to
replaced and repaired parts. Repairs after the warranty are subject
to a charge.
GB/IE

11
IAN: 271528
Service Great Britain
Tel.: [phone] (£ 0.10/Min.)
E-Mail: deltaspor[email protected]
Service Ireland
Tel.: [phone] (0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltaspor[email protected]
You can also find spare parts for your product at:
www.delta-sport.com, category Service - Lidl Spare Parts Service
GB/IE

12
Félicitations !
Vous avez acquéri un produit de haute qualité. Apprenez à connaître
le produit avant sa première utilisation. Lisez pour cela attentivement
le notice d’utilisationsuivant. N’utilisez le produit que comme décrit et
pour les zones d’application indiquées. Veuillez conserver ce notice
d’utilisation. Transmettez tous les documents en cas de cessation du
produit à une tierce personne.
Informations importantes
Veuillez s’il vous plaît lire attentivement les instructions et les
informations citées ci-dessous avant la première utilisation de votre
nouveau casque. Ce casque a été conçu pour une utilisation avec
un skate-board, des rollers, des patins à roulettes et autres activités
sportives similaires, et confectionné conformément aux techniques les
plus récentes. Malgré les standards de sécurité les plus élevés, des
blessures peuvent être causées lors d’accidents graves.
Dans certains cas, le choc peut être si violent que le casque peut
ne pas suffisamment protéger le conducteur contre des blessures à
la tête. La conformité avec l’annexe II de la directive européenne
89/686/EWG (et modifications ultérieures) ainsi que sa norme tech-
nique harmonisée EN 1078 a été certifiée par l’autorité compétente
TÜV Rheinland LGA Products GmbH, Tillystr. 2,
D-90431 Nuremberg, Allemagne, Notified Body No 0197.
FR/BE