Crosswater Berea 11-01 User manual

15121411-F
Teflon TapeAdjustable PliersAdjustable Wrench
Tools You Will Need
For ease of installation will need:
ƔToread the installation instructions completely before beginning.
ƔTo read all warnings, care, and maintenance information.
16)$16,
Berea Single-hole Basin Faucet
11-01
Installation Instructions
Before beginning installation, check for any damage
that may have occurred during transport.
Note: Damage claims cannot be made during
or after installation.

11-01
Installation Instructions
1(a) 1(b) 2
34
15121411-F 2
Lower faucet into mounting hole.
Plate in 1(b) is optional and may be ordered separately.
Carefully tighten spout nut to secure
faucet.
Slide "C" washer onto faucet shank.
Slide push drain trim and plug into
drain hole and secure from below.
678
Push drain to test. Attach water supply lines. Turn on angle stops and check all
connections for leaks.
Hot Cold
5
Install the drain tailpiece to the
drain plug.

15121411-F3
93
Remove aerator with key and flush out debris. Re-install aerator and save aerator key for homeowner.
(a) (b)
3
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry
any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and
glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Cleaning Instructions
Problem Cause Action
Loose water supply lines
Aerator leaks or has an
inconsistent water flow pattern Aerator is dirty or mis-threaded Remove aerator with key and flush out debris. Reinstall aerator and save aerator key for homeowner
2nly hot or only cold water is
coming out of the spout The hot or cold stop valve is not opened 2pen the hot or cold stop valves
Handle will not move Cartridge is dirty or mis-fitted Remove, rinse and reinstall cartridge
Trouble-Shooting
If you have followed the instructions and your faucet still does not work properly take these corrective steps.
Leaks under spout body Tighten all conections

11-01 11-01
Replacement Parts
15121411-F 4
No. Description Part No.
1 Handle Mounting Hardware & Allen Key 9Q1347NT
2 Lavatory Spout Mounting Hardware 9Q1140NT
3 Supply Hose(Hot) 5G0M0069CC
4 Supply Hose(Cold) 5G0M0068CC
5
Push Drain Mounting Hardware 9Q0938NT
6
Push Drain Assembly 5Y0M0196
7
Aerator & Aerator Wrench 9Q252500PL
8 Cartridge 5D0M0174PL
9 Deck Plate Assembly(Polished Chrome) 9Q1169CP
10 Deck Plate Assembly(Satin Nickel) 9Q1169AP
11 Deck Plate Assembly(Polished Nickel) 9Q1169RN
12 Deck Plate Assembly(Bronze) 4)2
8
2
4
3
1
7
5
6
15121411-F 5
Applicable Standards/Codes
Installation Dimensions
9-12
2UGHUHG6HSDUDWHO\
27-7/8ʾ
7-3/8ʾ
4-1/2ʾ
10°
3-1/2ʾ
2ʾ
2-1/8ʾ
1-1/4ʾ-1-1/2ʾ
1/2ʾ
2ʾMAX
9/16-24UNEF-2B
,$302FHUWLILHGWRPHHWRUH[FHHGWKHIROORZLQJ
ƔASME A112.18.1/CSA B125.1
ƔUniform Plumbing Code
ƔNational Plumbing Code of Canada
ƔNSF/ANSI 61
ƔSection 116875 of the California Health & Safety Code
ƔEPA WaterSense
ƔADA Compliant
- 2ʾ1ʾ
2-3/8ʾ
7-3/4ʾ
1 1/4ʾ
16)$16,
Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone]
www.crosswaterlondon.com
email: [email protected]
Issue date: 23012020