Crosswater Leyden Robe Hook 14-51 User manual

Installation Instructions
2
Tools You Will Need
Leyden Robe Hook
14-51
Installation Instructions
For ease of installation you will need:
●To read the installation instructions completely before
beginning.
●To read all warnings, care, and maintenance information.
Flat Head ScrewdriverPencil Drill Philips Screwdriver Level
14-51-PC
14-51-SN
14-51-PN
14-51-BZ
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.
Before beginning installation, check for any
damage that may have occurred during transport.
Note: Damage claims cannot be made during or
after installation.

Installation Instructions
2
Series # 14
Robe Hook
Tools You Will Need
14-51-PC
14-51-SN
14-51-PN
14-51-BZ
Installation Instructions
For easy installation of your robe hook you will need:
● To read all the installation completely before beginning.
● To read all warnings, care, and maintenance information.
Flat Head ScrewdriverPencil Drill Philips Screwdriver Level
14-51
1
Determine the location of the robe
hook.
Align bracket and mark drill
holes in desired location Drill 1/4" holes in marked locations
Drive the wall anchors into the
drilled holes with a Phillips
screwdriver.
Place the mounting bracket over
the wall anchors. Secure it to the
wall using the supplied screws.
Temporarily place the robe hook on
the mounting bracket to check
alignment. If necessary, loosen the
screws and realign the mounting
bracket.
Place robe hook on the mounting
brackets. Secure it to the wall using
the bottom set screw.

3
14-51-PC
14-51-SN
14-51-PN
14-51-BZ
Replacement Parts
4
Installation Dimensions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and
dry any overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the
product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup.
Follow instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners,
cleansers or disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain
and glass cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.
Cleaning Instructions
No. Description Part No.
1 Mounting screws, anchors & plate 00072
2 Set screw 00309
14-51

3
14-51-PC
14-51-SN
14-51-PN
14-51-BZ
Replacement Parts
4
Installation Dimensions
● Only use a soft, dampened sponge or cloth to clean and polish the fixture.
● Wipe fixtures and the immediate areas clean and rinse completely with water immediately after installation and after
applying any cleaner.
● If you are using a cleaning compound on or close to the product, please test the compound on a hidden area of the
trim to ensure it will not damage the finish.
● Do not allow cleaners to soak anywhere on the product.
Cleaning Instructions
No. Description Part No.
1 Mounting screws, anchors & plate 00072
2 Set screw 00309
14-51
Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone] email: [e-mail]
Issue date: 15092019