Crosswater US-BTW0201 User manual

Adjustable
wrench
Channel
locks
Plumbers’ putty
or caulking
Flat head
screwdriver
Cross head
screwdriver
Hexagonal
key
Bath Waste and Overflow
US-BTW0201 / US-BTW0241
Introduction
US-BTW0241 Bathtub waste US-BTW0201 Bathtub waste
IMPORTANT: Please read these instructions carefully before
beginning and retain for future reference.
Tools required
We do not accept responsibility for any problems that may occur
through incorrect installation.
TUB
DRAIN
TUB
DRAIN
TUB
OVERFLOW
RUBBER
GASKET
RUBBER
GASKET
CONTROL
HANDLE
OVERFLOW
FACE
OVERFLOW
FACE
CONNECTING NUT
RUBBER
GASKET
WASTE WASTE
RUBBER
GASKET
WASTE
FLANGE
PLUG
GASKET
WASTE
FLANGE
FACE PLATE CLICKER PLUG
GASKET
HANDLE
SET SCREW
TUB
OVERFLOW
CONNECTING NUT
Installation Instructions

Issue date: 20112019
Warranty - This Crosswater London product is covered by a limited lifetime mechanical warranty. For full details, terms and conditions please visit our website.
For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone]
fax: [phone]
www.crosswaterlondon.com
email: [e-mail]
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any
overspray. This will maintain the finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product.
Simichrome Polish® contains a protective film to enhance maintenance and is helpful in preventing water spot buildup. Follow
instructions to ensure optimum results.
Never use an abrasive material such as a brush or scouring pad to clean the surface. The use of abrasive cleaners, cleansers or
disinfectants will alter the surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail polish remover, vinegar, wine, drain and glass
cleaners to remain on the surface. Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause damage to the finish.
Please see the website for care instructions for specific finishes.