Crosswater 17-20-T User manual

15122865-B
Adjustable PliersAdjustable Wrench
Tools You Will Need
Screwdriver
Taos Trim for Dual-handle Thermostatic Valve
with Volume Control and Diverter
17-20-T
Installation Instructions
For ease of installation you will need:
ƔToread the installation instructions completely before beginning.
ƔTo read all warnings, care, and maintenance information.
ƔTocomplete the valve rough-in prior to installing this trim kit.
Before beginning installation, check for any
damage that may have occurred during
transport.
Note: Damage claims cannot be made during
or after installation.

17-20-T
Installation Instructions
15122865-B 2
5
12
4
Slide on top plate on the finished
sleeve. If the top plate does not
engage the finished sleeve an
extension kit is necessary.
Please contact your Crosswater
London dealer.
Ensure that the valve installed
correctly. Turn off the water supply and remove the mud guard.
Install escutcheon with 2 screws.
Do not overtighten the screws.
3
Thread on finished sleeve.
Slide on temperature control
escutcheon engaging the stem
making sure the temperature
override button facing straight up.
Secure with screw.
Set the volume control/diverter
handle and escutcheon at 12 o'clock
and place on the top stem and
nipple. Rotate the escutcheon
clockwise to secure the assembly to
the plate.
6
Align the handle at 6 o' clock position
and slide handle into escutcheon
and secure with set screw.
79
Turn on the water supply. Remove all
shower heads and/or hand showers.
Turn the volume control/diverter
handle to each function to flush the
system.
8

17-20-T
15122865-B 6
Applicable Standards/Codes
Installation Dimensions
15122865-B3
IAPMO certified to meet or exceed the following:
$60($&6$%
8QLIRUP3OXPELQJ&RGH
1DWLRQDO3OXPELQJ&RGHRI&DQDGD
$'$&RPSOLDQW
Rotate the cartridge stem to adjust
safety temperature. Rotate clockwise
to reduce temperature while rotate
counterclockwise to increase
temperature. Once the temperature
is 100ºF go to step #13.
Turn off the water supply. Remove
temperature control handle and
escutcheon.
100
o
F
Safety
Temperature
10
Turn on the water supply, with the
temperature control handle in the
default position, measure the
temperature of the water. If the
temperature is 100ºF, go to step #14,
if not go to step #11.
100
o
F
Safety
Temperature
12
11
13
Reinstall the temperature control
handle and escutcheon making sure
the temperature override button is on
top and the handle is set at 6 o'clock.
Turn off the water supply. Remove
handle, escutcheon.
The valve maximum temperature is
set at 107ºF. Should your customer
like to change this go to step #15.
If not go to step #20.
107
o
F
Hottest
Temperature
15
14
Reinstall the inner white temperature
range control ring.
18
Rotate the inner white temperature
range control ring to adjust
temperature. Rotate clockwise to
reduce temperature while rotate
counterclockwise to increase
temperature.
17
Remove the inner white temperature
range control ring.
16
2-3/4 ʾ
3 ʾ
8-3/4"
7-1/4"
4-1/8 ʾ
1/2"
1-7/8 ʾ - 2-5/8 ʾ
3/4 ʾ -14NPT
2-1/2 ʾ - 3-1/4"
6-1/4" - 6-1/2 ʾ

17-20-T
15122865-B 4
Replacement Parts
15122865-B
5
NO. Description Part NO.
4 Screw M4X80 5T0F0266NT
1Spring
˂
Button
˂
Pin 9Q1112
2 Handle Assembly 9Q1195
Hex Set Screw 9Q1356NT3
6 Temperature Range Control Ring 5K202720PL
Extension kit 9Q2420005
19
Installation completed.
20
Reinstall handle, escutcheon.
1
2
3
4
56
Ordered Separately if needed
Cleaning Instructions
Rinse away any traces of soap and gently dry with a clean, soft cloth after each
use. Rinse completely with water and dry any overspray. This will maintain the
finish and avoid water spotting.
To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do
not allow the solution to soak on the product.
Simichrome Polish® contains a protective film to enhance maintenance and is
helpful in preventing water spot buildup. Follow instructions to ensure optimum
results.
Never use an abrasive material such as a brush or scouring pad to clean the
surface. The use of abrasive cleaners, cleansers or disinfectants will alter the
surface finish and void the warranty.
Do not allow certain materials such as toothpaste, cologne, shaving cream, nail
polish remover, vinegar, wine, drain and glass cleaners to remain on the surface.
Prolonged contact will alter surface finishes and void the warranty.
We DO NOT recommend using any household cleaners as many can cause
damage to the finish.
Please see the website for care instructions for specific finishes.
Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website.
For further information contact:Crosswater London, 393 Fortune Blvd., Milford, MA 01757 www.crosswaterlondon.com
Toll free number: 844-XWATER-1 (844-992-8371) tel: [phone] fax: [phone] email: [e-mail]