Croydex Flexi-Fix 1919 User manual

FLEXI-FIX WALL MOUNTED MIRROR
SAFETY AND CARE
1. Always take care when using power tools, particularly if there is
any water in the working area.
2. Always check for hidden cables and pipework before drilling
and take extreme care if there is any water in the working area.
3. Always use a residual current circuit breaker (RCCB/GFCI).
4. Always wear suitable eye protection when drilling.
5. When drilling into a tiled surface do not use a hammer drill.
6. Always use a drill bit that is suitable for the surface that is
being drilled.
7. The wall plugs supplied are for use on solid walls only. For cavity
walls or plasterboard use specialist fixings that are suitable for
the type of wall construction.
8. To retain the best quality finish, clean product regularly with a
soft damp cloth.
9. Do not use abrasive or chemical cleaners, as these may
damage the product.
10. Redecoration may be required on some painted surfaces after
removal.
12. Do not position glass products directly above a heat source.
x1
FIXING PACK CONTENTS
x4 x4
x2 x1x2
6mm
15/
64”

Croydex, Central Way, Andover,
Hampshire, SP10 5AW, UK
EU: MIL, Unit 8 Purcellsinch
Ind Est, Dublin Road, Kilkenny,
R95 HP71, Ireland
[phone]
[phone]
[e-mail]
www.croydex.com
WMA 110 R04
1
3
4
When drilling new holes.
Max C. = 1 5/16” (34mm)
Min C. = 9/16” (15mm)
C.
2