CYP CA-HDMIAT User manual

HDMI Over CAT5
Transmitter
Operation Manual
CA-HDMIAT

TABLE OF CONTENTS
1. Introduction................................................................................ 1
2. Features...................................................................................... 1
3. Package Contents.................................................................... 1
4. Operation Controls and Functions........................................... 2
4.1 Front Panel........................................................................... 2
4.2 Rear Panel........................................................................... 2
5. Specifications............................................................................ 3
6. Connection and Installation.................................................... 4

1
1. Introduction
Cypress CA-HDMIAT is the transmitter (Tx) unit of HDMI over CAT5 Tx/Rx solution,
depends on the type of receiver (Rx) unit used, CA-HDMIAT can extend HDMI
signal through CAT-5 cables for a distance up to 50/100/150/250 meters. The
installation of Cypress HDMI Over CAT5 is easy and quick, simply place CA-
HDMIAT next to your HDTV source such as a DVD player, then place the
receiver unit (CA-HDMI50R / CA-HDMI100R / CA-HDMI150R / CA-HDMI250R) next
to your display, and get all necessary cables connected to complete and
enjoy.
2. Features
1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.
2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.
3. Supports high definition input up to 1080P, output resolution follows input.
4. Easy to install and simple to operate.
3. Package Contents
1. Cypress CA-HDMIAT - HDMI Over CAT5 Transmitter
2. 5VDC Power Supply Adaptor
3. Operation Manual

2
VIDEO DDC DC 5V
CAT5 OUTPUT
1 2 3
4.2 Rear Panel
1. VIDEO OUTPUT:
Connect the VIDEO output to the VIDEO input of the receiver unit using
CAT-5/CAT-5E/CAT-6 cable.
2. DDC OUTPUT:
Connect the DDC output to the DDC input of the receiver unit using CAT-
5/CAT-5E/CAT-6 cable.
Note: For advanced user only, if it's known that the DDC or HDCP data are
not required for both source and the display, you can use a single CAT-5
cable to connect the VIDEO ports of transmitter and receiver.
3. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to AC
wall outlet.
4. Operation Controls and Functions
4.1 Front Panel
1
HDMI to CAT 5
HDMI INPUT
1. HDMI INPUT:
Connect the HDMI input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.

5. Specifications
1. Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,
1080i@50/60Hz, 1080p@50/60Hz
2. Input: 1 HDMI female port
3. Output: 1 CAT-5 output for VIDEO, 1 CAT-5 output for DDC
4. Power: 5V DC power supply
5. Dimensions: 123(W) x 125(D) x 30(H)mm
6. Weight: 700g
3

Cypress HDMI Over CAT5 Series:
Product
CA-HDMIAT
CA-HDMI50R
CA-HDMI100R
CA-HDMI150R
CA-HDMI250R
Description
HDMI Over CAT5 Transmitter
HDMI Over CAT5 Receiver at 50 meters
HDMI Over CAT5 Receiver at 100 meters
HDMI Over CAT5 Receiver at 150 meters
HDMI Over CAT5 Receiver at 250 meters
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.
20070727 MPM-CAHDMIAT