D-Link DSL-2740B User guide

D-Link Technical Support –How to setup Time and Date Page 1of 3
How to setup Time and Date
in your modem/router
This document details how to set Time and Date in your modem router

D-Link Technical Support –How to setup Time and Date Page 2of 3
Step 1. Open your Internet Browser and in the address field type in http://192.168.1.1.
Step 2. When prompted type in the Username and Password then click on the “Log In” button.
If you have not changed the password for the modem administration, the factory settings are:
Username: admin
Password: admin
Step 3. After logging in you will be presented with the modem’s configuration pages.
Click on [SETUP] > [Time and Date]

D-Link Technical Support –How to setup Time and Date Page 3of 3
Step 4. Tick [Automatically synchronize with Internet time servers] box under TIME SETTINGS section
Step 5. Click on the drop down menu for Time Zone and select your region, for example (GMT+10:00)
Canberra, Melbourne, Sydney and select Enable Daylight Saving if it applies to your region.
Step 6. Click on the [Apply] button at the bottom of the page to save your settings.