Degelman PRO-TILL 14 User manual

AConnect Hydraulics
DEPTH
WINGS
TRANSPORT
JACK
3
4
2
14
1
3
2
FLOAT
FLOAT
3
4
22
11
PITCH
ADJUSTMENT
1
143386 v1.1
QUICK-START GUIDE*
for PRO-TILL 14/17/2 0
* Refer to operators manual for complete safety and operation info.
T
O
B
E
E
L
I
G
I
B
L
E
F
O
R
Y
O
U
M
U
S
T
R
E
G
I
S
T
E
R
WARRANTY
REMEMBER! You must complete Product
Registration to be eligible for Warranty.
IMPORTANT: Re-phase and cycle oil in the Depth Control Cylinders 1
before use (especially after long periods or storage).
• Hydraulic Connections/Hoses
• Working points & pins
• Hubs & Spindles
• Tire Pressure: 41 PSI (283 kPa)
• Check for missing, worn or
damaged parts.
Maintenance
(Check Machine Daily)
GPS Reference
(Set overlap to 6”per side)
(with 20" discs) 2" Depth
Pro-Till 14 150” (3.8m)
Pro-Till 17 190” (4.8m)
Pro-Till 20 230” (5.8m)
(with 20” discs) MAX Depth
Pro-Till 14 154” (3.9m)
Pro-Till 17 193” (4.9m)
Pro-Till 20 233” (5.9m)
(Consider setting the GPS to include
a 6”implement oset to the right)
*Refer to operators manual for
complete safety and operation info.

BPut in Field Position
iv)
i)
ii)
iii)
DTest. Check. Adjust.
100m
ERaise for Headland Turns.
1
CSet Cutting Depth
v) 3
2
3
Scraper Position Overview (Rubber Rollers)
Set Gap
distance at
1/4” to 3/8”
from roller surface.
Storage Position
Maintenance
Position
Engaged Position
Remove the 4 bolts to rotate into
or out of “Storage position”,
then re-install.
Loosen the 4 bolts to rotate up into
“Maintenance
Position”
& secure.
Loosen the 4
bolts to rotate
downward.
Set the scraper
clearance
(1/4” to 3/8”).
Properly tighten.
10-12 MPH
(Ideal Operating Speed)
Start with 8stops.
Test depth & adjust.
Pitch Adjustment
(Adjustment Rods
on the 2 Outer
Cylinders)
Depth Adjustment
(Depth Control on
LH Cylinder)
Typically
Set to 2”
1
Tool Storage Location
22
3
1”
3
3
FMAX Transport Speed: 40 km/h (25 MPH)
IMPORTANT: Operator must read and understand the tractor manual
in order to place the required hydraulic circuits into oat position.
IMPORTANT: Re-phase and cycle oil in the Depth Control Cylinders
before use. This is especially important after long periods of storage.
1