Deltech Fitness DF1200 User manual

*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
[phone]
DF1200
LAT ATTACHMENT
Assembly Manual

BOX CONTENTS
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT DELTECH FITNESS TOLL FREE [phone]
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY
CABLE
QTY 1
C
LAT BAR
QTY 1
D
WEIGHT CARRIAGE
QTY 1
E
PULLEY ASSEMBLY
QTY 1
A
ROUND CAP
QTY 2
F
SNAP HOOK
QTY 2
GM12 WASHER
QTY 4
I
FRAME TUBE
QTY 1
B
M12 NUT
QTY 2
J
M12 x 75MM BOLT
QTY 2
H

INSTALL PULLEY ASSEMBLY (A) TO THE FRAME TUBE (B) USING M12 x 75MM BOLTS (H), M12
WASHERS (I), AND M12 NUTS (J).
NEXT SLIDE THE WEIGHT CARRIAGE (E) ONTO THE FRAME TUBE (B). INSTALL ROUND CAPS
(F) INTO WEIGHT TUBE ON WEIGHT CARRIAGE (E).
WEIGHT CARRIAGE INSTALLATION
JI
A
IH
B
E
F

G
G
C
D
INSTALL THE CABLE (C) STARTING WITH THE END WITHOUT THE BALL-STOP THROUGH THE
TOP OF THE BODY ASSEMBLY MAKING SURE TO INSERT THE CABLE BETWEEN THE PULLEY
AND STOP BRACKET. RUN THE CABLE OVER BOTH PULLEYS AND DOWN TO WEIGHT CAR-
RIAGE ASSEMBLY.
INSTALL SNAP HOOKS (G) TO EACH END OF THE CABLE AND CONNECT TO LAT BAR (D) AND
WEIGHT CARRIAGE.
MAKE SURE ALL THE BOLTS ARE TIGHT BEFORE USE. REMEMBER TO CHECK THEM PERIODICALLY TO MAKE
CABLE INSTALLATION