Denver CRD-506 User manual

CRD-506
denver.eu
07/22
À DÉPOSER
EN MAGASIN À DÉPOSER EN DÉCHÈTERIE
OU
FRFR
Cet appareil et
ses accessoires
sont recyclables

Safety informaon
Please read the safety instrucons carefully before using the producor the firsme and
keep the instrucons for future reference.
ENG-1
1. Thisproducsnotatoy.Keepitoutofreachofchildren.
2. Keepproductoutofthereachofchildrenandpetstoavoidchewingand
swallowing.
3. Productoperangandstoragetemperatureisfrom0degreeCelsiusto40degree
Celsius.Underandoverthistemperaturemightaffectthefuncon.
4. Neveropentheproduct.Touchingtheinsideelectricscancauseelectricshock.
Repairsorserviceshouldonlybeperformedbyqualifiedpersonnel.
5. Donotexposetoheat,water,moisture,directsunlight!
6. Pleaseprotectyourearsagainstloudvolume.Loudvolumecandamageyourears
andriskinhearingloss.
7. Theunitisnotwaterproof.Ifwaterorforeignobjectsentertheunit,itmayresult
infireorelectricshock.Ifwateroraforeignobjectenterstheunit,stopuse
immediately.
8. OnlyusewithsuppliedAdaptor.Thedirectplug-inadapterisusedasdisconnect
device,thedisconnectdeviceshallremainreadilyoperable.So,makesurethereis
spacearoundthepoweroutletforeasyaccess.
9. Donotusenonoriginalaccessoriestogetherwiththeproductasthiscanmakethe
productfunconalityabnormal.

ENG-2
1
1. LCD display
2. Scan button
3. Preset button
4. Snooze/Sleep button
5. Prev. button
6. Volume Down button
7. Power/Mode button
8. Menu/Info button
9. Alarm button
10. Next button
11. Volume Up button
12. Antenna
13. Headphone output socket
14. DC mains input socket
22 3
4
5 6
7
8910 11
12
13 14

BASIC OPERATION
Setting up
Mains
To run the radio from the main power, follow the instructions below.
1. Connect the DC mains plug to the DC mains input socket on the rear of the unit.
2. Connect the adapter plug to a mains outlet and switch the radio on.
Standby & Power off mode
Scanning for DAB stations
Note: As the DAB radio station list is stored in the memory, no station search
takes place the next time you switch on your radio.
Telescopic antenna
The appliance features a telescopic DAB/FM antenna on its back. Pull the antenna
out completely and orient so to achieve the best reception.
1. Press and hold the Power/Mode button for 1 second to put the system into
Standby mode.
2. To switch it back on, press the Power/Mode button.
1. In DAB mode, press and release the Scan button to carry out a scan. “Scanning”
Storing preset DAB stations
will be displayed, and a progress bar will show the scan progress. The display
also shows the number of stations found during the scan.
Your radio can store up to 20 preset DAB stations to instantly access your
favorite stations.
Note: When storing DAB radio stations as presets, they do not overwrite your
FM station presets.
ENG-3
1. Tune your radio to the DAB station you wish to preset with the Prev. or Next
button and confirm with the Preset button.
2. Press and hold the Preset button on the front of your radio. Preset Store <1:
(Empty)> is displayed and the number is flashing. Or “Empty” if no previous
station has been stored.
3. Use the Prev. or Next button to move to a preset location where you would like
to store the radio station (1-20).

4. Press and release the Preset button to confirm your selection. The display will
Tuning to a preset DAB station
In DAB mode
confirm Preset X stored, where “X” is the number of the preset (1-20).
Note: If an existing DAB station is already stored as a preset, it will be
overwritten when storing the new station.
Using your FM Radio
Alarm setting:
1. Press and release the Preset button; the display shows Preset Recall s1 and
the name or frequency of the station stored, or “Empty” if no previous station
has been stored.
2. Press the Prev. or Next button to scroll to the Preset location and station you
would like to listen to (1-20).
Press the Preset button; the radio will instantly tune to that station and play it.
Note: If no DAB station has been stored with the Preset button, Preset Empty
will be displayed. The radio will revert to the previously selected radio station
in a few seconds.
1. Extend the telescopic antenna.
2. Press and hold the Prev. or Next button to scan up or down the frequency
range. When a station is found, the scan stops and the located station is played.
Press the Scan button to search FM stations.
3. You can fine-tune the frequency by pressing the Prev. or Next button to
advance 0.05 MHz with each press.
ENG-4
Press the Alarm button, press the Prev. or Next button to choose
Alarm 1 or Alarm 2 and confirm with the Preset button.
Adjust the hour and minutes with the Prev. or Next button and
confirm with the Preset button.
Choose the alarm duration from 10 to 60 minutes and confirm with
the Preset button.

NOTE: <Alarm 1 setting> same as <Alarm 2 setting>
Select between DAB, FM or buzzer as an alarm source. Choose with the
Prev. or Next button and confirm with the Preset button.
Press the Prev. or Next button to select the alarm occurrence. Select
between Once, Daily, Weekdays or Weekend, then press the Preset
button to confirm.
Adjust the alarm volume with Vol+ or Vol- and confirm with the Preset
button.
Confirm the alarm settings by choosing Alarm On and confirm with the
Preset button.
In Alarm setting 1 and 2, select “Alarm Off”.
Stopping alarms
When the alarm sounds, press the Standby button to stop it.
Snooze function
When the alarm sounds, press and release the Snooze/Sleep button to
activate the snooze feature. “Snooze 9 minutes”. The alarm sounds again in 9
minutes.
Turning off the alarms
Bluetooth mode
Sleep timer
In DAB or FM mode, press and hold the Menu/Info button to enter the
<System> menu. Then press the Prev. or Next button to cycle through options
until you locate “Sleep”.
You can set your radio to turn off automatically using the sleep timer. You can
choose Sleep off, 15, 30, 45, 60 and 90 minutes.
6. Press and hold the Preset button to disconnect the Bluetooth device.
Headphone socket
ENG-5
1. Press the Power/Mode button to select Bluetooth mode.
2. Search “Denver CRD-506” with the Bluetooth device. When the Bluetooth
device finds “Denver CRD-506”, select the connection.
3. Press the Preset button to play or pause.
4. Press the Next button to select the next track and the Prev. button to select
the previous track.
1. Connecting the headphone deactivates the speakers.
2. Sound adjustments also affect the sound through the headphone.
NOTE:
Turn down the volume before connecting or putting on the
headphone.

EN
Manufacturer’s name or trade mark,
commercial registration number and address
DongGuan Obelieve Electronic Co., Ltd.
91441900050747698U
Huazhaoxin Industrial Park B-4/F,Golden Phoenix
Industrial Zone, Fenggan Town,Dongguan,GuangDong
Province,People’s Republic of China
Model identifier
OBL-0501000E
Input voltage
100-240V
Input AC frequency
50/60Hz
Output voltage
5 V
Output current
1 A
Output power
5 W
Average active efficiency
76.52%
Efficiency at low load (10%)
--
No-load power consumption
0.075 W
ENG-6

Please notice - All products are subject to change without any notice. We take reservations for
errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
FMFrequencyrange:87.5-108MHZ
ENG-7
denver.eu
DABFrequencyrange:174.9–239.2MHz
MaxOutputPower:1W
DENVERA/S
Omega5A,Soeften
DK-8382Hinnerup
Denmark
www.facebook.com/denver.eu
Electricandelectronicequipmentcontainsmaterials,componentsandsubstancesthatcanbe
hazardoustoyourhealthandtheenvironment,ifthewastematerial(discardedelectricand
electronicequipment)isnothandledcorrectly.
Electricandelectronicequipmentismarkedwiththecrossedouttrashcansymbol,seen
above.Thissymbolsignifiesthatelectricandelectronicequipmentshouldnotbedisposedof
withotherhouseholdwaste,butshouldbedisposedofseparately.
Allcitieshaveestablishedcollectionpoints,whereelectricandelectronicequipmentcaneither
besubmittedfreeofchargeatrecyclingstationsandothercollectionsites,orbecollectedfrom
thehouseholds.Additionalinformationisavailableatthetechnicaldepartmentofyourcity.
Hereby,DenverA/SdeclaresthattheradioequipmenttypeCRD-506isincompliancewith
Directive2014/53/EU.ThefulltextoftheEUdeclarationofconformityisavailableatthe
followinginternetaddress:denver.euandthenclickthesearchICONontoplineofwebsite.
Writemodelnumber:CRD-506.Nowenterproductpage,andREDdirectiveisfoundunder
downloads/otherdownloads.
OperatingFrequencyRange: