Dinstar DAG1000-4O User manual

Quick Installation Guide
DAG1000-4O
DAG1000-8O
DAG2000-16O
DAG1000-4S4O
DAG2000-8S8O
欢迎您选购鼎信通达旗下产品！
安装设备之前请仔细阅读本安装指导。鼎信通达为客户提供全方位的技术支持，需要更多在线
技术支持，请拨打技术支持热线电话：[phone]。
网址：www.dinstar.cn
THANKS FOR CHOOSING DINSTAR’S VOIP GATEWAY!
Please read this guide carefully before installing the gateway. If you need any technical
support, .please contact us
Tel: [phone]
Email: [e-mail]
Web: www.dinstar.com

Models and Ports
1
Description of Indicators
DAG1000-4O
DAG1000-8O
DAG2000-16O
Model
Port Type
1
1
0
WAN
2
2
3
LAN
4
4
8
FXO
2
Indicator Definition Status Description
Power Indicator
Running
Indicator
FXO In-use
Indicator
On
On
On
Of f
The gateway is powered on
The gateway is powered off or there is no power
supply
Of f
Slow Flashing
Green Flashing
Network
Link Indicator
Network Speed
Indicator
PWR
RUN
FXO
WAN/LAN
The gateway is running properly
The gateway is running improperly
FXO port is currently occupied
FXO port is idle or faulty
The gateway is properly connected to network
The gateway is not connected to network
or network connection is improper way
Work at 100Mbps
Work at 10Mbps
Fast Flashing
/
/
/
FXS
DAG1000-4S4O
DAG2000-8S8O
1
0
2
3
4
8
8
16
Please confirm your product model before installation and follow the installation
guideline for the model.
Telephone ln-use
Indicator
On
FXS
FXS port is currently occupied by a call
FXS port is idle or faulty
If there is a SIP account registered successfully,
the indicator is fast flashing
Of f
Of f
Of f
Of f

3
DAG1000-4O/DAG1000-8O
Indicators and Ports
Power Indicator
Running Indicator
Network Link Indicator
Network Speed Indicator FXO In-use Indicator
Power Port FXO Ports LAN Ports WAN Port
Reset Button
DAG2000-16O
FXO Ports 0-15
Power Switch Power Jack L A N Ports Grounding Lug
Power Indicator
Running Indicator
FXO In-use Indicator
100-240VAC
50/60H z
DAG1000-4S4O
Power Indicator
Running Indicator
Network Link Indicator
Network Speed Indicator
FXO In-use
Indicator
FXS In-use
Indicator
Power Port
FXS Ports LA N Ports WAN Port
Reset Button FXO Ports

DAG2000-8S8O
FXS Ports 0-7
Power Indicator
Running Indicator
FXO In-use
Indicator
FXS In-use
Indicator
FXO Ports 8-15
Power Switch Power Jack LAN Ports Grounding Lug
Installation Attentions
4
Anti-jamming: to reduce the interference with telephone calls, it's highly recommended
that telephone lines connected to the gateway should be placed away from power
cables.
Power supply: DAG1000-4O, DAG1000-8O and DAG1000-4S4O are equipped with
12VDC power adapter, while DAG2000-16O and DAG2000-8S8O accepts AC input
voltage of 100-240V. Please ensure safe and stable power supply.
Network bandwidth: please ensure there is enough network bandwidth so as to
guarantee stabilized running of the gateway.
Temperature and humidity: to avoid any accident that might cause malfunction, it's
advised to install the gateway in an equipment room where temperature and humidity
are appropriate.
Ventilation: to avoid overheating, please do not pile up the gateway with other devices
and make sure the gateway has good ventilation around.
Mechanical load: please make sure the gateway is placed steadily to avoid damage. It's
highly advised to horizontally place the gateway on a flat surface or a cabinet.
Installation Instructions
5
Connection Diagram for DAG1000-4O/DAG1000-8O
Connect gateway with network, and connect gateway with power input.
Network Cable
LAN
Telecom Operator User
PSTN
PS T N Line Network Cable
Router
DC 12V Power Plug PC
AUX2
Connect FX O port with PS TN line.
100-240VAC
50/60Hz

Connection Diagram for DAG2000-16O
Connect gateway with network, and connect gateway with power input.
Connect FX O port with PS TN line.
AC 100-240V
Grounding Cable
Grounding Lug
Network Cable
Switch
Network Cable
100-240VAC
50/60Hz
Connection Diagram for DAG1000-4S4O
Connect gateway with network, and connect gateway with power input.
DC12V
Power Plug
Network
Cable
ADSL
Network
Cable
LA N
RJ11
Telephone Line
PSTN
Line
Telephone
PC
PS TN
Connect FXS port with Telephone line, and connect FXO port with PSTN line.
PC
Telecom Operator User
PSTN
PS T N Line

Connection Diagram for DAG2000-8S8O
Connect gateway with network, and connect gateway with power input.
Connect FXS port with Telephone line, and connect FXO port with PSTN line.
Modify PC’s IP Address
6
To log in the Web Management System of the gateway, firstly, you need to modify the
IP address of PC which is used to access the gateway and to make it at the same
network segment with the gateway.
AC 100-240V
Grounding Cable
Grounding Lug
Network Cable
Switch
Network Cable
100-240VAC
50/60Hz
PC
PSTN Line
PS TN
RJ11 Telephone Line
Telephone
On the PC, click ‘Network (or Ethernet) → Properties’.
1

Double-click ‘Internet Protocol Version 4 (TC P/IPv4)’.
2
Select ‘Use the following IP address’, and then enter an available IP address
‘192.168.11.XXX’ which is at the same network segment with ‘192.168.11.1’.
3
Log in Web Management System
7
Open a web browser and enter the gateway’s IP address (default IP is 192.168.11.1).
Then input username and password in the displayed login GUI. Both the default
username and password are admin.
Modify Gateway's IP Address
8
Basic Configurations of FXS
9
(1) Configure SIP Server
Log in the Web Management System of the gateway, and then click SIP Server in the
navigation tree and then enter the address of the SIP server which is to be registered.
Click Save in the last.
If you want to modify the IP address of the DAG gateway, please click ‘Network →
Local Network’ in the navigation tree on the left of the Web Management System,
and then input new IP address and DNS server address on the displayed interface.

(2) Configure SIP Account Information
Click Port in the navigation tree on the left, and then click Add. Input the SIP account
and authentication password assigned by the SIP server.
Click Save and then restart the gateway for the new configurations to take effect.
Basic Configurations of FXO
10
(1) Configure Port Group
You are advised to divide PSTN lines into several groups and then distribute them to
different port groups. Generally, PSTN lines belonging to a same telecom operator
are distributed to a same port group.
Click Call & Routing→Port Group, and then click Add on the displayed interface.

When calls come from PSTN to the gateway, the off-hook auto-dial number is
generally regarded as the DID (Direct-inward-dial) number or destination number of
the SIP server.
Click Select Port for this Group, and the following interface will be displayed, and
then click Save to take effects.
(2) Configure IP Trunk
On the Call & Routing→IP Trunk interface, click Add to create an IP trunk which
connects to a peer SIP server.

(3) Create Outbound Route
On the interface, click Add to create an Call & Routing→<IP→Tel Routing>
outbound route for the IP trunk.
As shown in the following figure, Caller/Callee Prefix is set as ‘any’ and calls from IP
trunk 63<eLA> are routed to port group 1<TELE>.
(4) Create Inbound Route
On the Call & Routing→<Tel→IP/Tel Routing> interface, click Add to create an
inbound route for the IP trunk. As shown in the following figure, Caller Prefix is set
as‘any’ and calls from port group 1<TELE> are routed to IP trunk 63<eLA>.
Configure FXO Parameters
11
On the Advanced →FXS/FXO interface, configure the gateway to detect CID after
ring or before ring, and enable ‘Send Original CID when call from PSTN’. Format of
“from” field is set as ‘CID/CID’ when CID is available, while format of “from” field is set
as‘Display/User ID’ when CID is unavailable.

Configure Priority of Codecs
12
On the Advanced→Media Parameter interface, configure the priority of preferred
codecs. The gateway supports G.729, G.723, G.711U and G.711A.
Configure Impedance Value
13
To improve the compatibility of FXO ports, the gateway provides auto test to get the
most matched impedance value.
On the / interface, click Start Test and then the gateway will Advanced→FXS FXO
automatically detect the best impedance for FXO lines. After the test is complete,
save the impedance value.
More Details
14
This document only provides instructions for quick installation and basic
configuration,For detailed configuration and parameter explanation, please make
reference to user manual or ask for online technical support.

Basic Operations
15
Dial *158# to query the IP address of LAN port of the gateway;
Dial *159# to query the IP address of WAN port of the gateway;
Dial *114# to query the telephone number of a FXS port;
Dial *165*000000# to restore default IP address, user name and password;
Restore factory default settings:
(1)dial *166*000000#;
(2)press the RST button for 7 seconds;
(3)Log in the gateway and then click 'Tools →Factory Reset', then click Apply and
restart the gateway.
Dial *111# to restart the gateway.
FAQ
16
What if the caller number is not displayed when a call comes from PSTN ?
A. Consult the telecom operator about whether the CID function has been enabled, or
connect the PSTN line with a telephone to check it;
B. On the Advanced→FXS/FXO interface, check the gateway is configured to
detect CID before ring or after ring, and then check whether “Send Original CID when
Call from PSTN” is enabled or not.
Can the gateway be connected with PSTN lines from different telecom operators ?
Yes, it can be realized by creating port groups to manage PSTN lines belonging to
different telecom operators.
What if the gateway’s IP address is forgotten ?
Dial the number of PSTN line first, and then dial *158# to query the IP address of
LAN port of the gateway.
How to restore factory default settings ?
A. Press the RST button for 7 seconds;
B. Dial the number of PSTN line first, and then dial *166*000000#. After that, restart
the gateway.
C. Log in the gateway and then click Tools → Factory Reset, then click Apply and
restart the gateway.
IP COMMUNICATION SOLUTIONS
Shenzhen Dinstar Co., Ltd.
Web: www.dinstar.com
(1)
(2)
(3)
(4)