Displays2go SMFB Series User manual

User ManualUser Manual
FABRIC BUSTFABRIC BUST
DISPLAYDISPLAY
SKUs: SMFB SeriesSKUs: SMFB Series

2
PARTS LIST
PART QUANTITY
A: Base ..................................................................................................................1
B: Support Pole (2 pieces) ...................................................................................1
C: Bust....................................................................................................................1
D: Base Screw.......................................................................................................1
E: Crown (Not Included in All Models)...............................................................1
TOOLS REQUIRED:
Phillips Head Screwdriver
NOTE: Parts may vary depending on model purchased.
If you have any questions regarding our products, please visit us at www.displays2go.com or
contact Displays2go customer service at 844-221-3388.
Scan QR code
to visit product
page
AA DD
CC
BB
EE

3
1. Screw together both pieces of the support pole, as shown. The knob can be used to tighten the
pole at the desired height.
2. First, remove protective sticker on base.Then,
screw assembled support pole into base, by lining
up support pole over hole on base and threading
screw in from the bottom. Use a Phillips head
screwdriver to tighten screw into base.
3. Twist bust onto the fully assembled support
pole to securely attach it.
4. If model includes crown,
twist crown into top of bust to
attach.

4
Eny r w r bu!Eny r w r bu!
CONTACT INFORMATION:
www.displays2go.com
PHONE: [phone]