dji Mavic 2 Enterprise Mounting instructions

Rainbow UAV flight control software user manual v.1.0 1
Rainbow UAV flight conrol
software
Software instruction manual
Introduction：DJI unmanned aircraft will encounter various problems in manual opera-
tion. Sometimes, there is a little deviation in the ideal path to fly. Rainbow realizes automat-
ic flight. It can plan its own path, and the aircraft will fly automatically. It also adds some
custom photographing functions, panoramic photography, delay Camera, etc.
、Open Rainbow App 2
、Enter the connection interface to connect the aircraft 3
三、UI Description of interface basic information 8
四、Switching between different flight modes 9
五、Use of each mode 10
1. WAY POINT 10
2. ORBIT 21
3. HYPER LAPSE 24
4. FPV 27
5. FOLLOW ME 32
6. PANORAMA 34
7. TRACK 37
六、Setting 39
1. Camera setting 39
2. Aircraft setting 40
3. General setting 41
4. Voice setting 41
七、Put forward feedback questions 42

Rainbow UAV flight control software user manual v.1.0 2
、Open Rainbow App
1. Find the Rainbow App icon on your desktop
2. Click the Rainbow icon to enter the app

Rainbow UAV flight control software user manual v.1.0 3
、Enter the connection interface to connect the aircraft
1.Enter the connection interface
1.1 Click“Connect Drone”button

Rainbow UAV flight control software user manual v.1.0 4
1.2 Click“How to connect to the drone”button，Go to the wizard to view the connection
tutorial

Rainbow UAV flight control software user manual v.1.0 5
1.3 Follow the tutorial to connect the aircraft

Rainbow UAV flight control software user manual v.1.0 6
2．Connecting the aircraft
2.1 Install the battery and turn on the power to the remote control and the air-
craft
Turning on the aircraft: Find the intelligent flight battery switch,short press one and
then long perss until the starting noise sounds.
Turning on the remote controller: Find the remote controller power switch, short
press one and then long perss until the starting noise sounds.

Rainbow UAV flight control software user manual v.1.0 7
2.2 Connect the aircraft to the remote control via a data cable
Now Rainbow opens the connection and selects an app connection
After connection, click “FLY Drone”button to enter the aircraft interface

Rainbow UAV flight control software user manual v.1.0 8
三、UI Description of interface basic information
UI Interface basic operation instructions
Status bar, mode switch, compass, preview window, camera components, feedback, and settings

Rainbow UAV flight control software user manual v.1.0 9
四、Switching between different flight modes
•Click the "mode switching" button in the upper left corner to switch the mode
There are currently seven flight modes
•WAY POINT
•ORBIT
•HYPER LAPSE
•FPV
•FOLLOW ME
•PANORAMA
•TRACK
Enter different modes and use different operation modes. The specific usage of each mode will be described
below

Rainbow UAV flight control software user manual v.1.0 10
五、Use of each mode
1. WAY POINT
Click "mode switching" button to select waypoint mode
1.1Edit your own mission
•Click "5. Edit mission" button to add waypoints and Camera points

Rainbow UAV flight control software user manual v.1.0 11
•Add waypoint
Select "5.1. Waypoint editing" from the drop-down menu
Add several points in the interface as flying points

Rainbow UAV flight control software user manual v.1.0 12
•Add Camera point
Select "5.2. Camera point editing" from the drop-down menu
Add the point you want to shoot in the interface

Rainbow UAV flight control software user manual v.1.0 13
•Start mission
After setting, click the "3.Start mission" button
Click "START" to start the mission

Rainbow UAV flight control software user manual v.1.0 14
•Terminate mission
In case of any accident, click the "4. Terminate mission" button to end the current flight mission
1.2 Batch waypoint setting
•If you do not want to set waypoints separately, you can choose to set way-
points in batches
Click "5. Edit mission" button

Rainbow UAV flight control software user manual v.1.0 15
Select "5.3. Batch waypoint setting" from the drop-down menu, draw the position to
be flown, and the interface of "batch processing waypoint setting" will pop up. Set the
distance and altitude, and click "OK", and the route will be automatically generated
Set the Camera point
Start / Terminate mission

Rainbow UAV flight control software user manual v.1.0 16
1.3 Set mission property
•Click the "2. Set mission property" button to enter the setting interface
•Waypoint mission setting
1. Head mode：POINT TO NEXT WAYPOINT、USING INITIAL DIRECTION、CON-
TROL BY REMOTE CONTROLLER、USING WAYPOINT HEADING
2. Finish Action：NO ACTION、GO HOME、AUTO LAND、GO FIRST WAYPOINT、
CONTINUE UNTIL END
3. Path Mode：NORMAL、CURVED
4. Gimbal pitch Mode：POINTING TO WAYPOINT、INTEROLATION
5. Speed：- +
•After setting, click "close" to close the setting window, and click ">" to enter the waypoint
editing window

Rainbow UAV flight control software user manual v.1.0 17
•Modify / delete flight waypoints
Through the task attribute window, directly enter waypoint editing or click any waypoint in
the planned route.
You can edit the attribute of waypoint: Altitude, POI,Actions, or directly click the "delete"
button in the upper left corner of the pop-up box to delete the current waypoint. The "<" > "but-
ton at the bottom can select the previous and the next waypoint for editing
•Modify / delete Camera point
Click any Camera point in the interface to edit the Camera point attribute: altitude, or direct-
ly click the "delete" button in the upper left corner of the pop-up box to delete the current Cam-
era point. The "<" > "button at the bottom can select the previous and the next Camera point for
editing

Rainbow UAV flight control software user manual v.1.0 18
•Clear all waypoints and Camera points
Click "6. Clear all" button to pop up "clear all". Click "OK" to delete all waypoints and Camera
points
•Switch map mode
Click "8. Switch map mode" button to select the map mode from the drop-down menu

Rainbow UAV flight control software user manual v.1.0 19
1.4 Save task
•Click "11. Save task" button
It can save the current mission and continue to use it next time
Input the task name and click "save"

Rainbow UAV flight control software user manual v.1.0 20
1.5 Open locally stored tasks
•Click "10. Local tasks" button
Select Open saved mission as flight route