Dometic Cup Cooler User manual

Beverage cooler
Installation and Operating Manual. . . 6
Getränkekühler
Montage- und Bedienungsanleitung 14
Refroidisseur de boisson
Instructions de montage
et de service . . . . . . . . . . . . . . . . . . 22
Enfriador de bebidas
Instrucciones de montaje y de uso . 30
Cooler bevande
Istruzioni di montaggio e d’uso . . . . 38
Drankenkoeler
Montagehandleiding en
gebruiksaanwijzing . . . . . . . . . . . . . 46
Drik køler
Monterings- og
betjeningsvejledning . . . . . . . . . . . . 54
Dryck svalare
Monterings- och bruksanvisning . . . 62
Drikke kjøligere
Monterings- og bruksanvisning . . . . 70
Juomapidike
Asennus- ja käyttöohje . . . . . . . . . . 78
Bebidas frias
Instruções de montagem e manual de
instruções . . . . . . . . . . . . . . . . . . . . 86
напитков кулер
Инструкция по монтажу и
эксплуатации . . . . . . . . . . . . . . . . . 94
EN
DE
FR
ES
IT
NL
DA
SV
NO
FI
PT
RU
Napoje Cooler
Instrukcja montażu i obsługi . . . . . 103
Nápoje Cooler
Návod k montáži a obsluze. . . . . . .111
Nápoje Cooler
Návod na montáž a uvedenie do
prevádzky . . . . . . . . . . . . . . . . . . . .119
HűsítőItalok
Szerelési és használati útmutató . 127
PL
CS
SK
HU
Cup Cooler

Cup Cooler
3
25
150
137
150 150
150
1
1
1
2
2

Cup Cooler
4
max. 32
Ø 102 mm
2.
3.
4.
5.
6.
1.
3

Cup Cooler
5
2
1
4
159
174 137
130
120
102
32
38
5

EN
Explanation of symbols Cup Cooler
6
Please read this instruction manual carefully before installation and
first use, and store it in a safe place. If you pass on the product to
another person, hand over this instruction manual along with it.
Contents
1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4 Spare parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7 Cleaning and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
9 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
1 Explanation of symbols
D
!
!
A
DANGER!
Safety instruction: Failure to observe this instruction will cause
fatal or serious injury.
WARNING!
Safety instruction: Failure to observe this instruction can cause
fatal or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to
injury.
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.

EN
Cup Cooler Safety instructions
7
I
➤Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓This symbol describes the result of an action.
Fig. 15, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
Damage to the product resulting from mechanical influences and excess
voltage
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
2.1 General safety
DDANGER!
On boats: If the appliance is powered by the mains, ensure that
the power supply has a residual current circuit breaker.
!WARNING!
Do not operate the device if it is visibly damaged.
If this device's power cable is damaged, it must be replaced by
the manufacturer, customer service or a similarly qualified
person in order to prevent safety hazards.
This device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
This device can be used by children aged 8 years or over, as
well as by persons with diminished physical, sensory or mental
capacities or a lack of experience and/or knowledge, providing
they are supervised or have been taught how to use the device
safely and are aware of the resulting risks.
Cleaning and user maintenance must not be carried out by
children without supervision.
Children must not play with the device.
NOTE
Supplementary information for operating the product.

EN
Intended use Cup Cooler
8
Children must be supervised to ensure that they do not play with
the device.
Always keep and use the device out of the reach of children
under the age of 8 years.
ANOTICE!
Check that the voltage specification on the type plate
corresponds to that of the energy supply.
2.2 Operating the device safely
DDANGER!
Do not touch exposed cables with your bare hands.
ANOTICE!
Danger of overheating!
Ensure at all times that there is sufficient ventilation so that the
heat that arises during operation does not build up. Make sure
that the device is sufficiently far away from walls and other
objects so that the air can circulate.
Ensure that the ventilation openings are not covered.
Protect the device and the cable against heat and moisture.
3 Intended use
The Dometic Cup Cooler is a thermoelectric refrigerated cup holder. It can be
mounted into surfaces of various thicknesses.
4Spareparts
Designation Item no.
Trim ring SP-373-RING-AS-A

EN
Cup Cooler Installation
9
5 Installation
5.1 Choosing the location
Please note the following:
Choose an installation location that does not interfere with existing below-
deck objects and has enough ventilation below the surface to help dissi-
pate the heat generated by the thermoelectric process.
Allow 150 mm of space on all sides of the unit (fig. 1, page 3).
Make sure the chosen mounting surface is not thicker than 32 mm.
If space underneath does not have proper ventilation, an optional vent or
power vent might have to be installed to remove the built-up heat or unit
will not cool properly.
Do not locate in area where under-mounted portion of unit will receive fre-
quent seawater exposure or deck wash down.
For optimum performance, mount the cooler with the LED lights (rounded
end) toward the bow or uphill to allow gravity to pull the beverage toward
the coldest side of the cooler bore (fig. 22, page 3).
5.2 Mounting the Cup Cooler (fig. 3, page 4)
A
I
➤Drill a 102 mm hole in the installation surface (1).
➤Seal the raw edges of the mounting surface if applicable.
➤Detach the stainless-steel trim ring assembly from the Cup Cooler by ro-
tating the ring clockwise then lift it off.
➤From beneath the installation surface, slide the cup cooler upward
through the drilled hole (2).
➤Reattach the stainless-steel trim ring assembly by aligning the ring pins to
the entry slots.
NOTICE! Risk of damage
Do not use power tools. Hand-tighten only. Overtightening will
cause damage to the upper trim ring locking pins.
NOTE
For hard surfaces such as solid fiberglass and metal, tighten the
unit down evenly by tightening each of the 3 screws 1 full revolu-
tion after surface contact. For soft surfaces such as marine ply-
wood, tighten each of the 3 screws 2 full revolutions after surface
contact.

EN
Installation Cup Cooler
10
➤Lower the upper ring down on the lower body by aligning the pin into the
slot between the two LED lights (3).
➤Turn the ring counter-clockwise until it stops (4). It only fits one way.
➤Make sure the can pusher insert is properly aligned in bottom of Cup
Cooler with the two pushers on the same side as the two LED lights
(fig. 21, page 3).
➤Tighten the three support screws until they make contact with the under-
side of the mounting surface (5).
➤Connect a 10 mm drainage hose to the drain tube fitting on the bottom of
the unit (6).
➤Route the output sloping downward to an appropriate drainage location
onboard.
5.3 Electrical connections (12 Volt DC only)
I
➤Locate (or install) an auxiliary 12 V DC power switch (not included in
scope of delivery).
Typically this will be on a fused branch circuit attached to the supply bat-
tery (not the engine battery).
➤With the power off, attach the wires of the Cup Cooler to the wiring of that
switch. The red wire is positive and the black wire is negative.
Each unit has a 5 amp fuse built into its wiring which should be posi-
tioned in an accessible location (fig. 11, page 3).
➤Power on the switch and verify the blue lights inside the Cup Cooler are lit.
NOTE
Control of Cup Cooler can be managed with a single switch or
set up with zone switching.
Low-voltage cut off is at 10.5 volts DC to avoid a dead battery.