Doro 727 AHS User manual

design on speaking terms
Manual
doro 727 ahs

2
www.doro.com
2 www.doro.com2
9
English
Connection
When the handset is fully charged it must be
registered to the main base unit.
1.
Connect the mains adapter to the charger unit
and to an electrical wall socket.
2.
Carefully remove the handset battery cover.
Insert the batteries into the handset ensuring
correct battery polarity is observed, and replace
the battery cover.
3.
Place the handset in the charger with the keypad
facing outwards and initially charge for 24
hours without interruption. Once the handset is
correctly positioned, a beep will be heard.
4.
Press and hold the
J
button on the MAIN
BASE unit a few seconds, until the indicator light
starts  ashing. Registration mode will remain
active for 3 minutes.
5.
Press and hold
8
and
8 and 8
9
together until a long
beep is heard.
6.
Select the base unit you wish to register with by
pressing the corresponding number button
1
-
4
.
7.
Wait until PIN is displayed, enter the units PIN
number (0000 for this model).
8.
If the registration is successful the handset will
return to standby mode in a few seconds.

www.doro.com 3
English
Intercom
1.
Press and hold
I
until HS- is shown in the
handset display.
2.
Enter the handset number for the handset that
you wish to call,
1
-
5
.
Should an external call be received while an internal
call is in progress, a tone will be heard. Terminate
the intercom call by pressing
q
press
q
again to
q again to q
answer the incoming call.
Transferring calls/Conference calls
1.
While an external call is connected.
2.
Initiate an Intercom call as described above.
3.
To answer press
q
on the called handset.
q on the called handset. q
4.
To connect three parties in a conference call, on
the original handset press and hold
9
until
q
stops  ashing in the handset display.
If you decide not to transfer the call press and hold
I
until
INT
 ashes on the calling handset, or wait until
the called handset hangs up.
Other
The main manual contains information about other
functions, such as ringer signal settings, memories,
guarantee, troubleshooting etc.

1
Redial/Pause and Scroll
button
2
Recall/intercom button
3
Talk button
4
*
and Ringer on/off button
5
#
and Key Lock button
6
Erase/Mute button
7
Programming/Hands free
function
8
Caller ID/Scroll button
9
Phone Book memories
English
1
4
7
5
2
0
9
6
3
8
*#
 
 
 


9
9
7
8
1
2
3
4
5
6